Counting matching models…
IMPORTANT: One file uses a PrusaSlicer box modifier on the clip portion. If you use another slicer, this box will physically print out in place of the clip. Use the other 3MF file. The clip portion requires you to slow down for the…
December 2024 A friend showed me a twisty cone that she liked the look of. https://www.printables.com/model/927393-spiral-cone-fidget-toy The original is too loud for my taste, so I started from scratch in Fusion and found that mesh…
Update: Added step file to make remixes easier. Please do no sell derivatives of my design. It started free, it should remain free. Update 2: Added the caveat that the duct is quieter on my machine . Its possible that my stock duct,…
This remix of Michal Fanta's excellent gravity spoolholder has a tweaked ramp design which reduces the vertical fall and kachunk noise of the original. Michal's project is of interest to MMU2S owners because it eliminates the need for a…
In my hopes to reduce the overall noise level of my Ender 3 V2, I decided to make this new version of the motherboard cover. By eliminating the fan cover, the pitch and overall dB are reduced significantly. Read more about it here . I…
If you liked this remix please give a like ❤️, share 🔗 and upload your make 📷 ! I'd be very thankful to hear from your advice to get some feedback and improve as well. I've exported the STL model from the PrusaSlicer project uploaded by…
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Print the model as oriented in the STL. You will need 2x M3 x 6mm screws to attach the mount to the computer.
A model that will allow you to mount your MeLE Quieter3Q in any orientation. the dovetail and retention system means you can quickly install and remove the mini-pc. It was designed so i could very easily move it between my…
I designed this myself 100%, I didn't edit the original, but since I did use the original for some quick measurements I think that counts as a remix. The changes with my duct compared to others is, it fits correctly. It isn't off-center…
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
I broke several stock shrouds replacing and cleaning the fans, then i found the Quieter Ender 3 V2 Fan Shroud by iRndmz, i liked it and broke several of those replacing and cleaning the fans. Given that my fine motor control won't…
This is a snap enclosure I made for my telescope rig to mount the MeLe Quieter 2 to a Skywatcher Losmandy 355 plate. It is a tight fit so you may want to enlarge the model a very small amount (.05) and measure the tolerance against your…
Thanks to reddit user hclrke for providing his design so I could fine tune the hole spacing and vertical supports. Used M3 socket cap screws of suitable length to mount the plate to the Mele as well as to mount this assemble to PPBAV2. I…
Now you can insert heat inserts m3x5,7! (No more breaking shrouds due to to much nm on screwing in…) use original m3 screws to mount everything. I printed mine in petg but abs is more advicable i think. I changed the original with blender…
This set contains a vixen dovetail bracket to attach to the MiniPC (Original source of bracket model: https://www.printables.com/model/821544-mele-quieter-3c-vixen-dovetail-mount), a tripod mount to accept the dovetail, and a desk stand…
Wallmount for Quieter 2Q Mini PC by Mele After I've designed wallmounts for my raspberry cases and they turned out to be pretty convenient, I thought I need one for my Quieter 2Q too. Print with 15% infill. Because you have to bend the…
A mounting bracket for attaching a MeLe Quieter2 mini PC to a Losmandy-style dovetail bracket. Specifically this is tested to work on my WilliamOptics bracket. I'm using M3 bolts to attach the PC to the rear casing of the print, and M8…
Fits my Quieter 4c perfectly even though the original model was for 3q. Clamps to a leg on the ZWO AM5 TC40 tripod. Quick release makes it easy to remove the Qc from the rig and use it elsewhere. Printed at 10% infill, 3 walls, in ASA.…
Telescope Tripod leg clamp and holder for MELE Quieter MiniPC. Compatible tripod leg diameter: 40mm (Eg. SkyWatcher steel tripod for EQ-3, EQ-5, HEQ-5) Parts needed: 2pcs. M3*3*5mm brass insert 4pcs. M3*6mm screws. + + + Note: I remixed…
I have printed my parts on FDM printer using CF PETG for the fan spacer and TPU for the feet but most resins should also work. Feet can be made a bit smaller (thinner - let me know if you want smaller version). Changing the FAN Requires:…
A bracket to attach a SvBony 241 power box and Mele Quieter 4 PC to a finder shoe on your telescope. Print upside down and no supports are needed. In addition I used: 2 x M4 10mm screws to attach to the Power box 2 x M3 8mm screws to…
The original cover's poor ventilation significantly increases the fan noise because it echoes in there. This opens up the PSU with the honeycomb design to make it much quieter, while still having the ability to mount the original fan or…
I designed this to leave as much room as possible for the mini pc to cool. As you know, it does get rather warm while imaging. Preferable to print this model with PETG as it is more resilient to both, the atmospheric heat and MiniPC's own…
This is a simple raised stand for the Mele Quieter3 PC. Providing for a gap between the PC and the stand should allow passive airflow to help keep the PC a bit cooler. To attach the PC to the stand, you'll need 2x m3x20mm socket head cap…
English: I needed a support to fix de miniPC Mele Quieter3 ( https://www.amazon.fr/gp/product/B09XJX3CPQ ) on my telescope (Skywatcher Quattro 200/800). I then created a support plate that fit on the telescope rings (185mm between rings).…
My MK3S has an annoying rattle coming from the screen/housing. Even after tightening the screws in the housing it continued. I designed this quick print to isolate the screen holder from the frame in the hope it reduced the rattle. It…
Overview This is a simple 3D-printed bracket that mounts MELE mini PCs directly to a Vixen-style telescope dovetail rail. Tested fit: - MELE Quieter 3C - MELE Quieter 4C - MELE Cyber X1 Hardware (BOM) - 2x M3 square nuts (for the clamp /…
This is a desktop stand for the MELE Quieter. I made it for the version 2D, but probably fits the newer ones too as they are the same size. (The v4 was the newest at the time of uploading)
Holder for MeLE Quieter Mini PC that sits over your Azimuth clutch on the Celestron Evolution mounts. The holder sits loosely over the clutch so that it can rotate around the clutch to avoid snags if your USB cable gets tugged during a…
A shelf for the Mele Quieter 4C mini PC that fits on the iOptron 360 tri pier. It uses the pre-existing 3/8" threaded holes on the top plate to mount the shelf. Since the fanless Meles run hot, I designed a bracket to mount the Mele . The…
I am of the “keep everything off the OTA” camp vs. “put everything on the OTA but the kitchen sink” camp. With that in mind I designed and printed the models you see on this page. I share the mele with a “permanent” iOptron 360 tri-pier…
A simple design that lets air space for passive cooling. The PC can however still be warm so it is best to use PETG or better heat resistant filament (PLA not recommended). For assembly - On the PC side : 2 standard computer hard drive…
The MeLe Quieter 4C is a fanless Micro PC design that dissipates heat via its case. In use the case gets pretty hot which is intended and works as expected. This, Art Deco inspired fan duct helps to keep the case cool in situations where…
Printed with supports. The holes on the plate side have the dimension (6.4mm) to insert ruthex 450xM5S threads for M5 screws. The holes on the Mele side are 3.5mm for M3 screws.
I have just added chamfers and a recessed slot for the M3 bolts which go onto the backside of the Mele Quieter 2 (cylinder hex head). All the rest per original.
This has nothing to do with the performance of stepper motors, it just optimising some values in TMC config for quieter motors that doesn't heat that much. Temp of the motors went down around 10C and I can hold them after 10h print.…
Brackets for mounting a mele mini pc and SVBONY SV241 power distribution block to a dovetail/accessory bar. Separate file for a general purpose bracket for velcro-type attachments.
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
The bottom of the track is printed with Flex filament to avoid the noise when the track bumps down. The difference is very noticeable which is important for me since I work not far from my printer. Flex does not cope well with MMU so the…
Update 12/05/2018: Added a flush top mode if you don't want the 4020 fan bump. Quieter and cooler than the stock lid. Can be mounted with all stock hardware, or a 4020 fan if you prefer. Print with supports. I found that the Ender-3…
Just add 6 M3 nuts and you have a great new shroud. Be careful not to overtighten the bottom screws, as it can punch through the front (check photos). There's some supports in the pockets that needs to be cut out. Does not need supports…
