Vixen rail accessory clamp for Mele Quieter/Cyber mini PC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple two-point clamp for standard Vixen rails. Attaches Mele mini PC to your OTA
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
Overview
This is a simple 3D-printed bracket that mounts MELE mini PCs directly to a Vixen-style telescope dovetail rail.
Tested fit:
- MELE Quieter 3C
- MELE Quieter 4C
- MELE Cyber X1
Hardware (BOM)
- 2x M3 square nuts (for the clamp / “vise”),
- 2x M3 screws, length ≥ 35 mm (longer than 50mm starts sticking out),
- 2x M3x8 mm screws (to attach the printed mount to the mini PC).
Mounting options
The computer-side plate includes two mounting hole pairs:
- centered holes: keeps the PC visually centered on the Vixen rail,
- offset holes: mounts the PC with a small sideways offset (useful if you need extra space for cables on one side).
Print recommendations
- ASA recommended because of UV/sunlight; also please keep in mind the mini PC warms up from the underside, so the bracket may see additional heat,
- infilll: my print uses 70%, but the parts are so small and thin, they're practically solid,
- I strongly suggest printing each part in the default orientation provided within the STLs; this keeps the bracket’s stiffness and clamping strength less dependent on layer-to-layer bonding.
Assembly
Pre-assemble the clamp (“vise”) first:
- insert the M3 square nuts into their pockets,
- start the two long M3 screws so the nuts self-align.
Only then attach the assembled clamp to the PC using 2× M3x8 mm screws.
Usage
1. Choose centered or offset mounting holes (depending on your cable routing).
2. Attach the brackets to the PC with 2x M3x8 mm screws.
3. Slide/clamp the assembly onto the Vixen dovetail rail.
4. Tighten both long M3 screws evenly to clamp securely.
Notes
Do not overtighten the clamp - tighten just enough to prevent movement!