Counting matching models…
To change the gearbox oil on a BMW R1100R motorcycle you need this to prevent a mess. I don't know how the original "Ölablaufrohr" part 234680 (23 4 680) looks. But this fits on the R 1100 R. Probably other “R” models also. Please let me…
Mount for the Netgear MR1100
Three different diameter plugs for the motorcycle frame: 44mm plug (2 needed) 38mm plug 33.5mm plug I printed these in PLA and find they fit my frame holes perfectly. They're sized to press in quite tight to a 10mm depth and have a slight…
Protector para el faro principal de las BMW R1000GS con sus casquillos necesarios para el montaje. Subir el relleno bastante para que aunque sea flexible proteja de posibles impactos. Necesitarías para ensamblarlo: 1 tornillo superior…
These plugs conceal the holes when you remove the rear passenger grab handle. You will probably need some replacement M6 bolts for the front screw holes, as the original ones may not have full thread to screw in far enough. I'm not sure…
When you remove the original rear indicators on a Honda CBR1100XX it leaves a large flat plate with two holes. This adapter covers both holes and lets you mount a round-based aftermarket indicator onto the bike with the wires fed through…
Flat plug to push into a hole in the centre of the yoke. It's normally capped, but I bought my bike with this missing. The previous owner probably mounted a sat-nav here. It's an easy fit, not tight. You might want to allow some…
Need 4x m12 nuts to fit inside the 3d printed part
You need an (OPTIONAL M8 and) M5 Thread drill. You need also (OPTIONAL a M8 30mm screw ,) 4x M5 20mm screws and a 300mm M12 Screw. The M8 Screw is for a better durability.
Its an holder for an USB Charger with an integrated voltmeter and a KCD1 switch (round version). You need two M5x25mm Screws. USB-Charger:…
This are two Mounting bars specific designed for the R1150RT / R1100RT / R850RT BMW bike. LH and RH differ from each other due to the different placement of the lefthand and righthand side cylinder head. Therefor I didn't want to mount…
Clip zum anbringen an das dreieckige Seitenverkleidungsteil unterm Sitz einer BMW R1100GS Gedruckt mit PETG 0,1 mm Layerhöhe 25% Infill
Printed this for Netgear MR1100 LTE router. Wall mount cradle. Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 60% Filament: Octave PLA Black Notes: I slowed…
Alternative for BMW Tool 23 4 680. Completely remodeled the Design in Solidworks. Now its longer so it fits better for the GS. I may add a slight curve in future versions.
brauchte Ersatz, habe das original gescannt , die Bohrungen angepasst und eine Fläche angebracht um es einfacher drucken zu können, ist noch nicht schön, funktioniert aber.
After the OEM tail light decided to fall off on a long ride (plastic thumb-nuts BMW? really?), I decided to move to a universal Koso Infinity LED Tail light ( https://kosonorthamerica.com/product/infinity-led-taillight-red/ ) for the sole…
Alternative for BMW Tool 23 4 680. Completely remodeled the Design in Solidworks. Now its longer so it fits better for the GS. I may add a slight curve in future versions.
After the OEM tail light decided to fall off on a long ride (plastic thumb-nuts BMW? really?), I decided to move to a universal Koso Infinity LED Tail light ( https://kosonorthamerica.com/product/infinity-led-taillight-red/ ) for the sole…
Three different diameter plugs for the motorcycle frame: 44mm plug (2 needed) 38mm plug 33.5mm plug I printed these in PLA and find they fit my frame holes perfectly. They're sized to press in quite tight to a 10mm depth and have a slight…
Its an brake line holder for an Honda CBR1100XX. I upgraded my brake setup to steel flex brake lines and needed an new holder so i created this one. Fits brakelines with an outer diamter of 7mm. Print it with TPU with an infill of 15%.…
Its an brake line holder for an Honda CBR1100XX. I upgraded my brake setup to steel flex brake lines and needed an new holder so i created this one. Fits brakelines with an outer diamter of 7mm. Print it with TPU at an infill of 15%.…
When printing, use a high temp filament like Heat Treated Carbon Fiber Proto-Pasta
I printed this one at 15% infill using pla I went to a parts store and bought a cut to fit mirror repair kit. very cheap. but its works well. I didn't have any double sided 3m tape, so I used jbweld to fix the mirror to the printed…
