23 models
Locking device to lock clutch housing, used on BMW R1150 motorcycles. BMW part number - 11 5 640. Printed in 100% infill with PETG. Works and holds perfectly, even with those five 40Nm and 32° torque settings for flywheel bolts.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Extension for hand-guards on R1150 GS/A and similar ones (R1200 GS should have the same shape, but not tested). Extensions is made in two variants: Connection to hand-guard with M4x12 bolts and nuts (ideally with some button flange head…
Print approx. €8.25–€10.09 excl. taxPreliminary estimate for one variant
Bracket to hold bar for your navigation or phone on BMW R1150 GS motorcycle. Important note : This bracket is made for -street- use. If your navigation / phone is heavy and you will be riding a lot of offroad-ing, the vibrations of…
Print approx. €6.06–€7.40 excl. taxPreliminary estimate for PETGSource material: PET
Cover which goes into the throttle body of BMW R1150 motorcycles (or any other which has 48mm round throttle body) to prevent dirt / nuts & bolts / other debris falling into the intake and cylinder itself. As it is more “decorative” piece…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Holder for the most common thermometers you can find on Aliexpress and similar web-shops - rectangle with sensor on wire and round one with moisture indicator. I created three versions: Round one - 42 mm dia, 14 mm deep - created as first…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Replacement gear for BMW R1150GS speedometer drive - BMW RealOEM number 62122306287. There is probably no official replacement part of the plastic drive, so I took the original one and re-modeled it. Please note that dimensions of the…
If you managed to crack your original Adventure mounts, this is a model for you. If you're looking to upgrade your standard GS with Adventure plexi, then this is NOT a complete model – the inner (larger) brackets aren't here. This model…
BMW R1150GS Adventure with the 30 liter tank tends to get nicked when you “have to lay ‘er down”. There were aftermarket tank guards available by Touratech, but they aren’t manufactured any more and very hard to get second hand. WARNING:…
I've bought Marselus R1150GS sidestand extension , but it's designed for the non-Adventure R1150GS. The Adventure has a different footprint. This model reuses two (middle and bottom) out of three stainless plates + mounting hardware from…
A disc break lock holder for BMW R 1150 GS. Will probably fit on other bike frames as well as long as the frame diameter is 20 mm. Needed: M5 x 20 mm socket drive cap head screw M5 self securing nut Print Settings Printer Brand: Creality…
This are two Mounting bars specific designed for the R1150RT / R1100RT / R850RT BMW bike. LH and RH differ from each other due to the different placement of the lefthand and righthand side cylinder head. Therefor I didn't want to mount…
Bmw R1150GS Adventure - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Two models: Standard colours - Special Edition colours Resize/Scale to adjust dimension All our designs are free to download and use—because sharing…
Un piccolo portachiavi - A small keychain
I replaced the clock with a beeline. the clip is from a bar handle, but can also be printed. The wall at the upper part is very thin, so print carefully. lower and ubber part as well as clip can uses m4 thread nuts to connect. i used some…
Protective headlight grill designed for the BMW R1150GS . Protects your headlight lens from flying stones and trail debris. Includes 3 different mesh designs to choose from! Required Hardware: 2x M5x50mm bolts. Print Settings & Tips:…
I replaced the clock with a beeline. the clip is from a bar handle, but can also be printed. you need the clocks mount to hold the beeline mount in place. The original seal from the beeline can be reused. Since the beeline is completely…
Ho stampato le staffe in PETG. Puoi anche usare ABS o simili. Il PLA non è consigliato. Se vuoi offrirmi un caffè, usa il link paypal nell'ultima immagine.
Spesso si usura molto facile così ne ho creato una copia con l'occhiello più grande e più spesso per prevenire l'usura.
A simple ABS cable holder for the BMW R1150RT and similar models. I use them instead of a cable tie.
Abdeckung für das Sitzbankschloss
Footpeg replacements for BMW R1150R motorcycle. These things are very expensive to replace and wear out after years. I scanned the original , reworked the model to compensate for the lost material and added a thread pattern for improved…
needed a sealing ring crankshaft r1150 gs help for mounting the inner sealingring of the crankshaft of a r1150gs motorcycle i resin printed it but i need to work on it on the outside ( old resin)
Spesso si usura molto facile così ne ho creato una copia con l'occhiello più grande e più spesso per prevenire l'usura.
