Counting matching models…
UPDATE 5/17/20 I have completed 2,3,4 of the updates i thought would be good. If someone could please**try it and let me know how it works with the bottom ribs I would be forever in your debt I have printed several of the speedloaders on…
I modeled the Punisher Skull and added it to the Short 2 IPT file in this source. https://www.thingiverse.com/thing:580466 I found this one https://www.thingiverse.com/thing:2742432 on here, But my slicer didn't like it so I made one. I…
The source marked this model as adult content.
This tool will allow you to quickly make correctly sized springs for AR-15 magazines and is adjustable to allow for various types of wire. This project is heavily inspired by HW Enterprises’s SpringFactory. Included is a PDF guide, STLs…
Dies ist ein Waffen Ständer für mein Airsoft Gewehr. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Das Magazin ist völlig neu designed, inspiriert habe ich mich von den Magpull und ETS Magazinen. Zum verbinden des Magazins…
These seven slot, vertical, AR-15 magazine holders can be mounted with either a female threaded magnet, or screwed to the wall (pre-centered holes provided). If using magnets, I would recommend at a minimum three 25lb+ Neodymium magnets.…
Available versions: for 1-2-3-4-5 mag, real and airsoft with screw and perforated panel mount. The mounting holes are designed for 4mm countersunk screws.
Airsoft speedloader m4/ar15 You need: 1 m3x20mm 6 m3x10mm 6 m3x10-20mm 1 m6x20 1 m6mm nut 1 half pen spring Printed with: 0.4mm nozzle, 3 Walls, 15% infill and 0.16 layer height. Message me if the tolerances is too tight for your printer.
Made a holder to be able to hang AR-15 polymer magazines made by MFT. This might work for other brands but this was specifically measured for MFT brand. I used 3 #6 X 3/4" wood screws to mount. Print Settings Printer Brand: Creality…
Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…
Reuploaded with most recent fixes and edits. Thingiverse and discord have all the old files if you want them. *PAAR stands for Printable Airsoft Assault Rifle duh This is a set of files to get a body of an M4 looking thing designed to be…
vise block. used for removal of the barrel. protect the finish on your upper receiver while using a vise. vise blocks are about $20 online so i thought ide just use a couple of bucks of pla instead. remix however you like, i did this one…
This Magwell Flare fits Aero Precision M4E1 AR15 Lower with slip-on fit and retention features wrapped around rear. Fit is tight; if printer oversizes part then filing angled contact surfaces should be workable. The rear retention…
!!!!!!!!!!!!!!!!!!!!! This has only been tested in my particular frankenstein AR9. Functionality and safety in any other firearm cannot be guaranteed. If you damage your firearm or yourself, that's a you-problem. !!!!!!!!!!!!!!!!!!!!! v2b…
I made this useing parts from the original pistol for consistancy print as you would any of lucky's weapons .
This is a quick jig i made to hold an AR15 level for engraving. It has been designed with mounting points 75mm on center to match an X-Carve CNC wasteboard. Two of the M5 thumbscrews are used to secure the jig, the third M5 thumbscrew…
This Jig will help you clean your AR15 by holding the upper and lower receiver apart. Recommended Print Settings: Prusament PLA 0.1mm Layer Height 10% Infill 5+ Perimeters Recommended Print Orientation as shown If you need anything, feel…
Links for the hardware Germany: gearbox: V2 Gearbox M4 M16 QRS-System Delta Armory (softairstore.de) hop up: CNC Hop-Up Kammer / Unit für M4 Series Type B (softairstore.de) barrel: 6.01 AEG Barrel 310mm - Action Army (softairstore.de)…
AR15 magazine pouch attached to a belt. The pouches are connected from three elements with an elastic cord with a diameter of 3 mm. The belt holder is composed of two parts fastened with 4 M3 screws, 16 mm long. The chargers are equipped…
this is a robust foregrip/handle for picatinny rail
Prop model of the famous 30 round AR15 magazine, this is a prop and it's in no way a functioning piece of firearm. The model is not scaled to size but the proportions are right, you just need to dial in the correct height in the slicer…
Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…
Remix of my previous design . Recommended Print Settings: Prusament PLA 0.1mm Layer Height 10% Infill 5+ Perimeters Recommended Print Orientation as shown If you need anything, feel free to reach out! Questions/Suggestions/Criticism is…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
The handle is suitable for any weapon with this finish. Here installed on a Nerf Commander elite 2.0 , an economical solution to get an over-equipped nerf by paying only a small sum! (only 299 kcz here ) The model prints with a support,…
I tried to improve koobysnacks77( https://www.thingiverse.com/thing:2335510) already awesome stock design. The sling mounting option on the sides cant be done after the real steel version on the AEG version because of the battery chamber,…
I liked the original design by airbiscuity but the fitment was far too tight. I loosened the fit so the magazine will slide in and out easily but not fall during running. Secondly I changed the loops to be a belt clip that can be mounted…
A magwell with a skull on it
radion ecotec gen 5 xr15 light surround
New design that fits both M3 and M2 PMAGs. Huge thanks to @CodfishDan_1930853 for helping me tweak the model to fit M2 PMAGs! Dust Cover for MagPul AR15 M2 + M3 PMAGs. Optimized for printing. I was able to get rid off all but one…
This is a redesigned kit from AKHTO-DESIGNS bullpup ar15 kit https://cults3d.com/en/3d-model/game/ar15-bullpup-kit-beta-gbbr-version-highrise that brings in more customizability to the overall appearance. Most bullpup kits only support…
AR-15 type stand for wall mount (i screw them to wooden board and then threw it on the wall XD from the other side its just some flat head bolts and nuts press fitted to the pockets/holes (its like M8 or something like that) i dont know…
A well-known AR15 cleaning tool. Now available for 3d print. Fits perfectly if printed 0,15mm or less. If necessary, sand a little internal hole with 600 paper grit. Attached as a one part and cuted into two pieces with connector - for 3d…
Needed more grip on my ARs. This version was made for rifles that had issues due to the gas block location. If you need your grip in the perfect location, but due to the gas block, you could not put it there and had to compromise, this…
There are a lot of speed loaders for AR15 magazines on different sites and I have tested all of them. Unfortunately none of them fulfilled exactly what I wanted. My requirements were: -easy insertion of ammunition without feeding…
Cut Away Model of an AR15 Bolt Carrier Assembly scaled to 200% for demonstration and education purposes. I made the ejector longer than usual. This way you can trim it to length to accommodate different lengths of springs you might have…
Texturized Lil Chonkers AR15 Grip by FFFTechnology Standard Grip Body Block Texture is the modified part with texture.
https://nd3dprint.etsy.com It's a support-free design. If you don't print it with pla+ then I advise you to rotate it 90 degrees on its X axis. I made this with Tinker Cad. 0.1-0.2mm layer height It will no longer be support-free if you…
AR152 exoskeleton to prevent the PTT from being hit accidentally. MK4 just has more protection around the volume knob.
AR15 Gas Block Tool A tool to help hold your gas block while you are trying to drive the gas tube pin in or out. It is plastic, if you beat on too hard or too many times it will break. Not to fear! it is a cheap and relatively fast print.…
I thought rharding13's hitch cover was a thing of beauty, but then I read the assembly instructions and realized I'd never make it. It needed... shudders multiple parts. I know I'd never work up the energy to find them all. But I…
Angled Vertical Foregrip (M-Lok) This is made in Shapr3D. Low-profile angled platform with ggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future. I'm adding a 3mf and stl file…
I made this spacer for CMMG .22LR conversion kits. It's installed in place of the stock AR15 buffer weight, and uses the stock AR15 buffer spring to apply pressure on the back plate of the CMMG BCG so that it has no movement when the bolt…
Prop model of the famous Vietnam War era 20 round AR15/M16 magazine, this is a prop and it's in no way a functioning piece of firearm. The model is not scaled to size but the proportions are right, you just need to dial in the correct…
Shortly after NATO's acceptance of the 5.56×45mm NATO rifle cartridge, Draft Standardization Agreement ( STANAG ) 4179 was proposed in order to allow NATO members to easily share rifle ammunition and magazines down to the individual…
This is a vise block similar to the Magpul BEV block. It uses your bolt carrier, bolt, and cam pin to allow you to attach to the barrel extension and torque barrel nuts or muzzle devices. Please print with the cylinder facing down and…
A dummy bolt carrier group for Smith & Wesson M&P 15, could be used as a security device or to avoid upper deformation during smithing. Print instructions 0.3 mm 70% to 100% infill Better if you print it from PETG.
d6 Turnkey size, mm 10
I needed a little stand that I could use to hold my M4 AEG magazines for storage and before/during filling them with BB's. There are 2 versions, a straight version and a alternating version. There are 1 through 6 magazine holders…
10.11.22 I added a .3mf file. This files shows how I reinforced the area around the screw to increase its strength and integration to the model's body. This is a remix of air_ 's AR 15 Magazine rack. It uses these magnets to attach the…
Place over loaded magazine with round nub pressing on the tip of the bullets and press in. Unloads under one second.
Needed more grip on my ARs. Fits standard M-LOK and set up for using M4 screws. If you need different hole sizing, contact me. Easy to print and strong. Use by putting index finger on front of grip and the other 3 fingers on the grip…
Every time I build a new AR, I typically paint the receiver set. I have always just used blue painter's tape. But I decided to make it a bit easier. I made some 3D printed masking inserts. I even added holes on the ends to hang them from…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not If this saved you a bunch time, trouble,or a solution to and annoying problem feel…
Magpul style honeycomb grip. Updated to remove bottom base plate
Having bought a airsoft M4 I found that my handguard and outer barrel were quite wobbly, to fix I needed just to tighten down my delta ring. But to do that you would need an armorers wrench which are not that easy to obtain where I live,…
Hey everyone, thanks for checking out my design! I set out to create a robust and rugged designed M4 mag pouch after failing to find one to my liking that was printable. After trying several production pouches, I liked the Gcode mag pouch…
This is a slatwall storage solution for your Magpul PMag magazines for 5.56/.223 AR15 or variant. This design uses metal slatwall hooks found on Amazon for additional security.…
m4x12 (1) m4x40 (1) m4 M-lok nuts (2) 2 10mm washers are highly recommended for distributing pressure more evenly
After creating a replica from scratch for HPA there were some holes and unneeded things. So I fired up my CAD. I was in need of covers for the selector cap, charging handle and buffer tube. In addition the original dust cover is triped…
Airsoft buffertube for AEG's and HPA rifles, length is 179mm so its printable on a Prusa Mini. No supports needed for printing, roughly 5-6 hours of print time, PLA+.
Simple plunger-style speed loader that is a lot more portable than the usual tabletop slider-style loaders. Requires no additional parts. Set the loader on top of the mag, slide 15 round into the loader, and push them into the mag with…
Summary The ST-AR15 Upper & Lowwer for CYMA Gel-Blaster Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
AR15 with optic key chain. You can make it thicker if needed but 3mm thickness seems to work well. I printed it to test with PLA. But if you want it stronger i would use PLA+ or ST-PLA.
There are so many designs out there for mounting and hanging PMags, but nothing really good for USGI magazines. This mount was designed around OKAY Surefeed 30 round magazines, but should work around most USGI aluminum and steel mags, as…
Mil Spec AR15 buffer tube vise block. Printed in PLA at 98% infill for strength so the buffer tube will not twist while tightening the castle nut. The fit is very tight on the buffer tube, but the plastic seems to be plenty strong.…
I have designed my own AR15 Wall Mount. My design incorporates 2 in-line screw holes for a more secure mount into the wall studs. I did have an issue with my first design where the mag well part of the mount broke away from the wall mount…
Update 2024-10-24: Due to many requests there are now upper receivers with a Picatinny rail (STANAG 4694) available. I did not print them myself. Please post a make or at least provide some feedback because you wanted this ;)…
I thought rharding13's hitch cover was a thing of beauty, but then I read the assembly instructions and realized I'd never make it. It needed... shudders multiple parts. I know I'd never work up the energy to find them all. But I…
Very fast and simple unloader for AR15 magazines It works best with the Magpul M3, it doesn't work perfectly with the M2, but it still helps. I printed from PETG at a 0.1 layer full of perimeters.
Basic wrench/tool for loosing and tightening AR10 / AR15 butt stock nuts. Best printed at 50% infill or better for best use.
Just a simple AR15 wall mount; no bells or whistles. I wanted a simple yet sturdy mount that I could mount on a wall. All the ones I found either flapped around or tried to be something fancy. This mount fits and locks in the magwell just…
Chunky square handguards, externally fluted to complete the distinctive Colt™ LMG look. Internally ribbed for extra strength. Each is made of two dovetail-jointed, pinned halves. Models are provided for rifle-length and mid-length gas…
This is a plug to fill the void in the SB Tactical AR15 PDW brace. Use supports/rafts at your own discretion. Works well with PLA or ABS. I havn't tested the print using TPU yet. Category: Replacement Parts
NEW VERSION AVAILABLE that fits both M2 and M3 PMAGs Dust Cover for MagPul AR15 M3 PMAGs. Optimized for printing. I was able to get rid off all but one overhang, but a well calibrated machine can handle the small remaining overhang easily…
Also when I printed this I printed it 100.05% Just a hair bigger and the magazines fit perfectly.
was tested with cmmg bravo not by me of course i dont own guns . guns are very bad and should be banned. I MEAN THIS IS AIRSOFT ONLY! or something? enjoy. feel free to make requests. Assembly insert “buffer screw” by using "screw 2" and…
A very slight modification to GonzoStrange's amazing 22LR magazine for AR15 conversion bolts. I'm not a fan of heat inserts, it's entirely possible I'm just no good at sinking them and seating them, but I much prefer printing-in nuts…
Made mounts in single, double, or triple configuration. Interior dimensions are a little bigger than a PMag.
NOTE: For Primo “C” only (23.5mm OD conduit) . Would probably be easy to adapt to the other variants, but I haven't tried. As part of an overhaul of my MPCNC, I was able to get super cheap HGR15 linear rails from Vevor, and designed…
I created this AR15 wall mount, inspired by the linked mount. It's a bit bigger for those of us who have crap on our rails like bipods and lights.
I've remixed my version of air_ 's magazine rack to make vertically stacking multiple racks a little cleaner and using a little less space. It uses these magnets to secure the rack to your safe or gun cabinet. There are 3 segments. The…
Holds 3 AR15 mags on the multiboard. Printed in Pla+ with 20% infill. I think it would be easier to attach to a flush mounted multiboard because it can be difficult to snap in wil the board off the wall but it works and holds full mags…
I have reinforced the handguard in the bottom section, because otherwise vertical grips could easily break the print. I have also designed a “gas block” which serves as additional fixation point for the handguard, but it only fits the…
Created this vise block to work on my AR15. Locks into the mag well, is reversable.
A holder for AR15 mags. Print instructions Designed to be printed with a .4mm nozzle at at .2mm layer height. But any setting is should work.
I wanted a simple jig for checking headspace but didn't want to mess with supports or printed threads. All you need is a spare piece of brass and to leave the extractor on. V1 has minor overhangs that fully lock the bolt in place. V2 is…
A remix of my previous remixed BCG case - this time for CMMG .22LR conversion kits. This version will not fit a standard AR15 BCG. The cap is designed to ride against the shoulder of the chamber insert as to protect the mouth of the…
Adapter for pistol magazines that allows you to turn an AR15 magazine into a double pistol magazine. Thanks to the elevation of one magazine, removal is hassle-free and quick. Tested in dynamic competitions :) Pouches required for the…
Updated 2025-04-14: Fixed an issue preventing the back-left corner from slicing correctly. Light shade for Radion XR15 LED aquarium light. This is a remix that increases the total height to 80mm, matching the XR30 light shades by percula…
XSR 155 - Yamaha XSR155R motorcycle keychain
Filament PETG-ABS Infill 20% supports are necessary
for those that want a 3d printed alternative to a bought model. it works by pulling the tap down and slide it like normal into a position you like on the buffer tube. - parts needed 1x M3 40mm bolt, ( socket head, but countersunk is the…
I couldn't find a mag clamp that works with plastic PMAG brand mags. I made one to fit PMAG mags, I made the lip a bit longer then other ones, I added room for the cross pattern on the PMAG. It fits 95% like a glove (about the best I can…
Sling mount plate for Airsoft M4/AR15 style rifles. Should be printed solid and with supports.
This is a jig for laser engraving AR-15 dust cover/ejection port covers. Remember to flip your images 180 degrees when using this jig and engraving the inside of the cover! SCALE IT DOWN TO 10% OF THE SIZE BEFORE PRINTING...
A tool to help get the magazine catch pushed out of your M16/AR-15 without scratching or marring the metal. Tool compresses the spring to make removal of the magazine catch easier. Like what you see and find it useful? Buy me a beer More…
