Counting matching models…
Nice and detailed Wall Art model of the Nissan GT-R R35 Liberty Walk. Adjustable size. I accept new model suggestions.
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
15 % infill grid 7 hours on an ender 3 s 1
Print approx. €7.98–€9.76 excl. taxPreliminary estimate for one variant
I designed these for my mom after she lost one of her original ones. I used a ballistic chronograph to compare to the originals and was unable to see any difference in performance. Printing notes: The casing is printed in PETG, and the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Upgrade your BenQ XR3501 setup with this custom-designed monitor mount, for stability and a clean fit. Unlike many mounts found online, this design allows you to keep the monitor’s rear protective cover installed while providing a solid…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
Insert for Mobile Coolers Frigerate or Mobicool FR35. Creates one flat base area and allows condense water to drip below and keep food dry and above the mess. 4 seperate parts that are attached together for a full plate
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
Summary This is a model of a Nissan GT-R (R35 CBA) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated connectors.…
Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/
Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 4th and most sophisticated iteration. The design builds on my previous completely 3d printed frame NLR35. The goal was to make it lighter, more powerful and yet fully…
Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 3rd iteration, you may know the previous versions https://www.thingiverse.com/thing:4743497 and https://www.thingiverse.com/thing:4818009 This time, the design aim was…
Reinforced in blender and then edges hand smoothed/filleted with dynamic topo sculpting
Porta stile e passione automobilistica nella tua casa con questa elegante wall art della NISSAN GTR , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della NISSAN GTR in una…
The Nissan GT-R R35, or simply the Nissan GT-R, is a high-performance sports car that debuted in 2007. It's known for its advanced technology, including a potent twin-turbo V6 engine and all-wheel drive, making it a track and street…
Nissan Gtr R35 Mini Wall Sculpture Layer height: 0.2 - 0.3 mm Enjoy!
Nissan GTR-R35 wall decoration - multi color
You can use the same parts as for the NLR35. You can get the O4 air unit <a href="https://www.banggood.com/custlink/DvGS4l0mPD" target="_blank">here</a>
The Suzuki DR350 dash fixer upperer! I've gotten mine printed in PLA at the moment for prototyping, but the ideal I this case would be a white PETG I think. You will also need 3x M5x30 cap head hex bolt and an accompanying nut. Print out…
About the OsVac System: There are plenty adapters for different hoses and machines, osVAC means Universal Vacuum System. Why osVAC (Blog side in german): https://ossso.de/osvac/
Print in either nylon or ASA. Both will suck, but they'll do the trick. And you need to angle the left side guard to get it to fit the build plate, but she'll go! I've included DXF files for laser cutting!
Make color changes to your preferred colors and have fun printing.
This attachment should be printed with at least 3 wall lines and made of UV-resistant material. PLA is not suitable. I printed it myself from PETG-CF and it has withstood the strain on my DR650 RSE for 1.5 years without any problems. Very…
A base for your GT-R R35 mini model, you have a ton of ways to print it, from the fastest one color way, to the best full color. Every file is linked down there.
Nissan GTR R35 NISMO This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
Watch part tray with a 35mm Center. Based on traditional design. This has handles and indexing for safe stacking.
I printed these from PETG at 100% infill. We'll see how they hold up. They need a lot of supports to print properly unfortunately.
Bump stop replacement for DR350 rear shock with 14mm shaft. Printed in TPU .28 with 30% infill.
Watch part tray with 35mm centre and screw divider
Make with 100% infill and ideally use metric hardware for mounting! Replaces SUZUKI P/N: 51203-13E00
I like motocycles too so i modeled it!
Here is a simple and strong mount for the BenQ Monitors where the adapter mount non longer works. Used was a plate converter Vesa Plate ( https://www.amazon.co.uk/Goobay-63267-VESA-Adapter-Mount/dp/B00GOI0WD2 ) and 6 x M4 45mm bolts.…
Adapter für meinen RYOBI Akku-Bandschleifer (R18BS) Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von Hobbyhimmel: https://www.thingiverse.com/hobbyhimmel/collections/osvac-adapter…
This is a bumper for the Proline 1/10 Chevy Nova No Prep RC body shell, it is contoured to support the front of the body and can be modified on the back end to suit your chassis.
Nissan GT-R R35 Keychain This keychain is inspired by the legendary Nissan GT-R R35 , known for its speed and aggressive design! Print with a 0.2 mm nozzle for finer detail. A must-have accessory for JDM enthusiasts and GT-R fans . Best…
Modelo desenvolvido para minha Meteor 350. Fique a vontade em utilizar e personalizar sua moto também! Me ajude e me siga @OficinaSingular
Nissan GTR R35 Gen 5 This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
About the Intake from Alphalogic: The Cold Air Intake was designed to draw a higher volume of cool air into the stock turbochargers while improving the metering capability of the factory Mass Airflow (MAF) sensors. With this intake…
Holder for vertical use Ruckus AP
Recently i did a mod to my R35 GT-R so that i can have Apple carplay and other stuff. I retro fitted the Nifty City carplay kit but i needed to plugin the audio interface under the armrest. I don't like to see messy cables so i have…
One can change the size but not the height. Follow instructions and ENJOY !!
Plaque de nissans gtr35 en relief de 125 mm x 50 mm x 5 mm
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. You can resize but not the height. Design Concept This model captures the iconic rear view of…
A detailed FDM-ready model of the 2017 Nissan GT-R R35, designed as a clean display model with functional moving wheels. The model uses separate rims, tires and logo caps. Each wheel is mounted with an individual screw threaded into the…
Nissan GT-R R35 — 3D Printable Model V1.0 Bring the legendary Nissan GT-R R35 to your 3D printer! This model is split into two STL files for easier printing: Top piece: approximately 150 mm long, with a flat-cut underside Solid bottom:…
Please follow the txt instructions for pauses and filament changes. You can resize, but do not resize the height.
THE LATCH ON THE VACUUM CLEANER REDMOND RV-UR356, RV-UR357, RV-UR359, RV-UR381
Сделано для увеличения емкости батарей. Вес литиевых меньше веса 18650.
Сделано для увеличения емкости батарей. Вес литиевых меньше веса 18650.
Make with 100% infill and ideally use metric hardware for mounting! Replaces SUZUKI P/N: 51203-13E00
The Suzuki DR350 dash fixer upperer! I've gotten mine printed in PLA at the moment for prototyping, but the ideal I this case would be a white PETG I think. You will also need 3x M5x30 cap head hex bolt and an accompanying nut. Print out…
