1 / 16
Nissan GT-R R35 2017 – Moving Wheels – 1:18, 1:24 & 1:64 — image 1
1 / 16

Nissan GT-R R35 2017 – Moving Wheels – 1:18, 1:24 & 1:64

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

FDM-ready Nissan GT-R R35 with moving wheels, separate tires and three included scales.

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
47
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Standard Digital File License

A detailed FDM-ready model of the 2017 Nissan GT-R R35, designed as a clean display model with functional moving wheels.

The model uses separate rims, tires and logo caps. Each wheel is mounted with an individual screw threaded into the reinforced transverse axle tube inside the Body.

The 1:24 version shown in the photos was physically printed and tested. The 1:18 and 1:64 versions are included in the download and shown in the slicer preview for scale comparison.

Perfect for

  • Nissan GT-R and JDM enthusiasts

  • Scale car collections

  • Automotive displays and dioramas

  • Functional desk models

  • Multi-color FDM printing

Model features

  • 2017 Nissan GT-R R35 body style

  • Functional moving wheels

  • Reinforced transverse axle tubes

  • Solid tapered axle supports inside the wheel arches

  • Separate front and rear wheel widths

  • Separate rims and tires for easy multi-color printing

  • Printable circumferential tire tread

  • Separate press-fit caps with a simplified Nissan-style emblem

  • Deep screw-head recesses hidden beneath the caps

  • Simplified and enclosed underside suitable for FDM printing

  • No interior or opening body panels

Available scales

  • 1:18 — approximately 261.7 mm long

  • 1:24 — approximately 196.3 mm long

  • 1:64 — approximately 73.6 mm long

The mounting system is adapted separately for each scale rather than being mechanically scaled.

What’s included in each scale

  • 1× Body STL

  • 1× Rims STL containing four rims

  • 1× Tires STL containing four tires

  • 1× Caps STL containing four logo caps

Important – tap the Body before installing the wheels

The holes in the Body must be tapped before the wheels are installed. Do not force an untapped screw directly into the printed axle tube.

Recommended hardware:

  • 1:18 — M3×0.5 screws; Body pilot hole Ø2.50 mm; rim hole Ø3.50 mm

  • 1:24 — M2×0.4 screws; Body pilot hole Ø1.60 mm; rim hole Ø2.60 mm

  • 1:64 — M1.6×0.35 screws; Body pilot hole Ø1.25 mm; rim hole Ø1.90 mm

Use one screw from each side of the car. Tighten each screw only enough to secure the wheel while leaving a small amount of axial clearance, so the wheel can rotate freely.

Test the rotation of every wheel and the fit of the caps before applying glue. The caps should be installed only after the final wheel adjustment.

Printing recommendation

  • FDM printer with a 0.4 mm nozzle

  • 0.15–0.20 mm layer height

  • PLA or PETG

  • Print the Body in its supplied horizontal orientation

  • Organic or tree supports recommended for the mirrors, spoiler and lower body overhangs

  • Rims, tires and caps are arranged for printing without supports

  • Print the caps with their flat inner surface on the build plate

For the smallest 1:64 version, use a well-calibrated first layer and reduced external-perimeter speed to preserve the wheel and cap details.

Share your print

If you print the Nissan GT-R R35, please upload a Make and share your photos. Your feedback helps improve future models, especially the wheel fit, screw mounting and cap tolerances across different printers and materials.

Tags