Counting matching models…
This is a custom grip for the R36S to make long play sessions more comfortable. I made it because I saw this video by HyperPlay RPG where they showcase a custom grip: After asking if I could print it myself, I didn't get a reply so I did…
Some simple shoulder buttons I found online.
A remix from @BlackDragonBE_168941 removed 2mm from the whole frontside So the outer key are easier to reach and press removed sharp edges see Photo adjusted tolerances for a thighter fit Since the original model included the Fusion360…
A hard case for the R36S retro gaming device. The case was designed to allow the buttons, joysticks and screen ample room inside the case. There is room to glue in a thin piece of felt above the screen for added protection. There are two…
This is a reference CAD model for the R36S. Use it to help make a case, or any other accessories for the R36S! Modifications: 2/20/2023 - Updated button positions and SD card slots
Please note that I am still waiting for my R36S to arrive. This should fit the console because I didn't change any of the internal dimensions from the original model. Print the grip upside down with support and bed adhesion. I printed…
This is a case for the R36S retro game console. I added a compartment in the bottom part for accessories like USB cabel and MicroSD cards. There are also two slots for an USB WIFI adapter and USB-C to USB-A OTG adaptor. You can choose if…
ABXY FN Start/ Select Buttons for R36S game console designed for FDM Printer Printed in PLA with .10 Layer Heught
Keeps the R36S protected pretty well! Print with the screen side up, paint supports near the triggers and around the smaller button holes. Have some precision scissors ready to get rid of stringing! I printed this with Overture high speed…
Rugged case for your r36s console with inserts to store the MicroSD cards, cable and WIFI dongle. No screws needed, the hinges assembled with pieces of filament Add color change to have the console image on the lid The accessories inserts…
Print with supports for the charging slot near the clip. Uses a piece of filament as the hinge, use a bit of superglue on both ends. Fix a felt strip to where the screen sits so the device will fit properly while in grip mode.
Print with the top of the device side on the print bed with a brim and skirt for extra plate adhesion. I printed this using PLA+, and lined the inside of the screen area with a felt lining to prevent any scratches to the screen.
A protective cover for the R36S handheld gaming device. It's designed to be printed in TPU. Maybe it would kinda work in PLA, but haven't tested it.
Print in TPU with the smallest layer lines you can! More details TBA
Simple remixed grip for the r36s. Must use adhesive backed felt for a snug fit.
Designed for FDM Printed printed in PLA .010 Layer height
Better Buttons for the R36s Handheld with tabs, so they don't rotate anymore in the case. Made in 4 Styles: blank Nintendo stlye ABXY Playstation Playstation bold I printed them in smokey black ABS-Like 3.0 Resin by Elegoo on a Anycubic…
Display stand to keep the R36s from potentially having something fall on its screen if its just sitting on the desk. Also makes it look nice on display and keeps it off its buttons. Make sure to check out my profile on makerworld for…
Simple grips for the R36S handheld. Can print upright with no supports, I printed it at .2mm layer height. Leaves a slot for the headphone jack, and usb ports, and doesn't reach far enough up to cover the SD slots. Does cover the battery…
Small jig / tool for aligning a screen protector when puttin it on the R36S. Designed for the screen protector shipped with the R36S (76mm x 59mm). May not fit other screen protectors. May fit other consoles, e.g. R35S, but don't have one…
A TPU case for the Datafrog R36S Retro Handheld. There are two designs attached, one that uses the included foam padding found in the box that shipped with the device, and another that is fully TPU with allowances for the screen, buttons…
Be prepared for the future and protect your R36S from the apocalypse with this original Vault-Tec safebox. Now with added pockets for iodine pills (or charging cables). Original case model from here:…
Upgrade your R36S controller with this 3D-printed thumbstick extender, designed to enhance precision and control in your favorite games. Whether you're aiming for headshots in FPS titles or fine-tuning movements in retro classics, this…
I now have 2 remixes. Version 1 is tilted back 10 degrees and has FUZZY SKIN. Version 2 is more like the original but with FUZZY SKIN but I added a modifier to remove the FUZZY SKIN where the game slides into the grip. Version 2 prints…
The stl files contain only the shell and circuit inlay, if you also want the inside coloring and text, use the .3mf (text can also easily be changed there, or more colors added). There's a line on the back inside where the base color will…
This is a simple heat vent for if you feel the need to put heatsinks on your R36S console and feel you need more airflow. Includes a simple jig for marking a hole for the air. Or you could just drill a whole bunch of holes, up yo you.…
I editet the original D-Pad to give it a more nintendo style and smotthed the edges a little bit. Also made two versions inspired by PlayStation D-Pads. I printed it in smokey black ABS-Like 3.0 Resin by Elegoo on a Anycubic Photon S at…
Recently printed a Skadis board to hold my handhelds rather than them dotted around the place. Noticed quite a few didnt have any designed (or had poor reviews) so I've designed my own. Fits well enough for me so hopefully helps others…
A Handgrip for the R36S, Fits perfect for mine. Controller Grip Handheld
The shape of it very closely mimics an Xbox controller, with optional fuzzy skin on the back for extra grip, and a cut-out on the bottom for the two usb ports and headphone jack. The fit is tight enough to hold the console in place for…
– German Ich hab mir ersatz Buttons gedruckt und diese haben zuviel spiel gehabt und somit massiv genervt. So hab ich alle Maße neu aufgenommen und die nochmal selbst gemacht und nun sind sie mit dem Gehäuse abschließend und können nicht…
The R36S console is amazing! If only it was just a little bit more comfortable to use… Born out of modelling clay, this slip-on handle for the R36S is meant to complete the experience of using the console and eliminate the cramps that…
Beta version 01-feb-25: Not tested yet :c
i designed this backplate to give my R36S retro console a Nintendo'ish look on the back. printed on bambulab a1 mini with 0.08 height, 10% infill and ironing on the top layer to give it a smoother look for the logo. i just glued it over…
R36S Ergonomic/dampened shoulder buttons This model was based on the buttons by R_mix a printables.com user and is licensed under Creative - Commons - Attribution - non commercial - Share Alike PRINTING TIPS: Printer: FDM Rafts: Optional…
Display your R36S retro handheld on your honeycomb storage wall for easy access. Printed in PETG
This is a 3D printable grip for the R36S handheld. I tried printing it at these settings and it came out well: Layer hieght : 0.2 mm Infill Density : 10% Brim: Yes Support : Yes (normal)
This is a very light and thin case for the R36S handheld. You will need 4 round magnets (height and diameter 5 mm). They are press fit. Please note that the images are licensed under a proprietary license; you are not allowed to…
My custom made D-Pad for the R36S console. The stock D-Pad was rattling and had sharp edges. my version eliminates both of those things. Printed face-down at 0.08 layer height, 30% infill, no supports.
I created this variant of the buttons, inspired by the design of @DigitalJedi8_1743801 (I didn't use the 3D model itself, but it seemed better than the initial layout I took inspiration from) I made it thinking about my glow-in-the-dark…
Very simple and fast to print stand for R36S with the flex cover by diluno
I printed everything with PETG of different colors using MK3S with MMU3
I performed this remix of the model in order to put a magnetic charging cable on it. Unfortunately the magnet is a bit strong and the stand light, so it only comes off if you tilt it a bit or if you weigh down the stand, however it works
I create my own R36S skadis Holder, There are plenty availble online, but i wanted to design my own, to evolve my 3D modeling skills. The bottom tabs of the Skadis hooks are very weak when installing wrong! Make sure to insert the hook…
Case with 10mm magnets for the R36s retro console.
Compact and simple protective case for the R36S handheld. Designed for easy use and everyday protection Improved access to volume and power buttons Raised front edges provide extra screen protection Console is inserted from the back and…
This project is a 3D-printed mini steering wheel adapter designed to easily mount onto the existing joystick of the R36S portable gaming console. This modification transforms the standard control for improved handling in racing and…
Remix of great project for 6mm magnets. Magnets holes designed as tight hex openings for easier pushing and glue space.
Probably more correctly, a cover for the clone of a clone of the R36S, as there seems to be plenty of choices out there. Basically, this is the same as the original I remixed, with some relief for the power button; so it should fit the…
Remix with 2 colors for R36S gaming consol.
My diealed-in version of Fn buttons for the R36S console. BEst printed at the lowest layer height and no supports.
R36S TPU Sleeve with battery covet
R36S console stand with a fold-out kickstand. Can be placed on a desk or mounted on a wall. Prints as a single piece.
An anti-slip pad for the minimalistic R36S stand (with cover).
This is a 1x4 holder for the R36S emulator.
R36S Neutral Density Screen Filter A simple neutral density (ND) filter holder for the R36S, designed to address PWM flicker by allowing the console to be used at 100% screen brightness while reducing the actual brightness with ND film.…
This is a case for the R36S retro game console. I added a compartment in the bottom part for accessories like USB cabel and MicroSD cards. There are also two slots for an USB WIFI adapter and USB-C to USB-A OTG adaptor. You can choose if…
Do you want to play your retro games with a more ergonomic and comfortable game controller like the Xbox controller and others. This stand will ensure your device stand comfortably on flat surfaces. Find attached a special for our paying…
Print with the top of the device side on the print bed with a brim and skirt for extra plate adhesion. I printed this using PLA+, and lined the inside of the screen area with a felt lining to prevent any scratches to the screen.
Display your R36S retro handheld on your honeycomb storage wall for easy access. Printed in PETG
Do you want to play your retro games with a more ergonomic and comfortable game controller like the Xbox controller and others. This stand will ensure your device stand comfortably on flat surfaces. Find attached a special for our paying…
