Counting matching models…
This is a remix of the excellent Gen #1 (R50, R52 & R53) Mini Cooper phone mount by weber395 (https://www.thingiverse.com/thing:4107581). I wanted a simpler version with a ball mount. fits same as the original, pretty much snaps into…
This cupholder design solves the issues with the horrible cupholders in the first gen Mini Coopers. These have inserts to hold everything from big handled travel mugs all the way down to a skinny red bull can. Having used the original…
Created this to allow for installation of the Power Acoustik CP-71W in my R53 Mini Cooper. The radio is a little taller than usual and the regular dash kit (Metra 99-9302) has two guides that stick out on the top and bottom, not allowing…
This is a phone mount for R50-R53 Mini Cooper. It bolts in place of the normally broken cup holder. You didn't need that cupholder anyways, this is way better. The holder has a boss with a hole that can be tapped or you can press a…
Are your car keys feeling lonely? Or do you want a silhouette of your car? Look no further! Add a nice-looking keychain or a silhouette of the sporty and stylish Mini Cooper or Cooper S. 0,4 nozzle 0.2mm layer, 2 walls No support needed.…
This is a strut cap designed to fit the Mini Cooper R53 with KYB tophats. Neither the OEM or included caps fit well, allowing dust/dirt/debris to enter the bearings below. This design utilizes a 2 degree taper with crush ribs to account…
The original clips on the window regulator cables broke when I was trying to replace the regulator in my Mini Cooper R52. The aftermarket regulator came with clips that clearly did not fit, so I modeled the original clip to print myself.…
A common upgrade for 1st gen MINI Coopers is to swap out the steel trailing arms for the cast aluminum arms on the 2nd gen cars. In order to continue using your first gen speed sensor that inserts into the new trailing arm, you need a…
Battery terminal cover for 2001 - 2006 Mini Cooper S R53 Printed in translucent red PETG 40mm/s Glass Bed 65 deg Extruder 245 deg There is no reason PLA will not work. Hold lid vertical in the open position and push down to clip on to…
Print the main bracket strong. Other than that, have fun and choose a nice color!
turbo manifold concept for a Borg Warner EFR 6258 to be used on an R53 mini cooper. This design prioritizes short runner length and keeping the turbo deep in the engine bay. Sized to retain factory AC lines. Many other modifications will…
This model was too big for my printer (Bambu P1S,) and I didn't need the phone holder. I split it in half, added pegs and holes, and made a tab that fills the phone holder slot and more firmly keeps this thing together. If you really want…
Introduction: The armrest on a R53 is one of the best options for a mini. Sadly the locking mechanism is one of the worst… A few years ago when I installed mine this disappointed me. And I printed a little tab at work to fix this problem.…
This is valve cover logo for Mini cooper R53. I just drop little bit epoxy glue and logo stays in place.
Slightly extended version of NiiWek's nut wrench for a bit of extra torque and reach
This Radio blanking plate is based my other model https://www.printables.com/model/1249402-mini-cooper-r50-r52-r53-flat-radio-dash-kit Print with at least 20% infill. Things left to do - make both sides symmetrical.
The part this replaces is a nightmare to find and criminally expensive. So… I submit to you a cheap and easily produced screw retainer for your Mini R53 Door Panel. Cheers friends! Printing and First Use: Nozzle : 0.4 mm Layer Height :…
You should use heat gun to form it to your car
Tried to Print in PETG and ASA. I could not get ASA to work without warping. My final product was printed in PETG with textured build plate. I'm still learning to print smooth with PETG so you might have success with that. Prusa Mk 4…
I printed this shifter grip for my 2005 MINI Cooper R52, but the hole was too long to lock into the shifter, meaning the handle would spin freely. I designed this extension to go between the shifter and the handle, and keep it from…
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
I've just added a set of four spotlights to the front of my Cooper S R53. This requires two relays, one for each pair and a fuse. This is designed to have two relay sockets push in from underneath and a fuse holder in the front slot. The…
Print setting recommendations: PETG or better .16 layer height 2+ walls 10% Gyroid infill No supports required Most important thing here is the filament type. Don't use PLA. This is going in your car, it's going to get hot in there. 2…
The power steering pump fan on the 2002-2006 Mini Cooper is located right on the bottom of the car and the plastic grille is easily damaged. Replacement grilles are about $30-$40 with long lead times so I modeled a replacement. The…
My recreation of the the cup holder ring for the rear cup holder of the R50 R52 and R53 Mini cooper.
I recreated a bracket for the Mini Cooper since the plastic piece broke.
This is an engine cover name plate for the R53 Print in ASA, PETG CF, ABS, or Nylon 20% infill Your printer can help with color changes
This lifts the left door enough to engage with the shutting mechanism at the top of the door. This fridge is secondhand to me, so I'm not sure how it broke--but I was tired of shutting it manually! Print in TPU at 100% infill. I used…
The original clips on the window regulator cables broke when I was trying to replace the regulator in my Mini Cooper R52. The aftermarket regulator came with clips that clearly did not fit, so I modeled the original clip to print myself.…
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
This is an engine cover name plate for the R53 Print in ASA, PETG CF, ABS, or Nylon 20% infill Your printer can help with color changes
This is a printed replacement gear stick bracket for an R50/R52/R53 Mini Cooper (model year 2001 - 2006 ). This bracket is designed to attach both the gear stick boot (leather fabric) and silver trim piece to the center console. Printing…
This is a printed jig which is used to compress the clutch valve cylinder for bleeding found on an R53 Mini Cooper (model year 2001 - 2006 ). This is designed to be used with a pair of M8 nuts and threaded bolts greater than 90mm in…
added a debossed mini logo and emblem. Can be painted in an AMS for a multi color print
The armrest of the early new minis have a lock that tends to break quickly. The lid of the armrest therefor starts sliding all over the place. This lock mechanism contains of 3 parts. 1: The inlay with 2 magnets (8x2mm) 2: The tabs ont he…
Print in PCTG or ASA Ball is angled towards the driver so the shank can be tougher and wont break as easily.
print in ASA or PCTG Its a genergic surface to mount a bluetooth receiver to useing some double sided tape.
Time and my child had destroyed half of my tabs to hold a cup in. So I made a new one, much stronger and flexes nice with 95A TPU. This is for the right side, but you can mirror the top to make it for the left (for RHD vehicles). Parts…
This is a model I made for myself. Thought I would post it on here in case anyone found it useful.
This is a printed replacement gear stick bracket for an R50/R52/R53 Mini Cooper (model year 2001 - 2006 ). This bracket is designed to attach both the gear stick boot (leather fabric) and silver trim piece to the center console. Printing…
This is a printed jig which is used to compress the clutch valve cylinder for bleeding found on an R53 Mini Cooper (model year 2001 - 2006 ). This is designed to be used with a pair of M8 nuts and threaded bolts greater than 90mm in…
added a debossed mini logo and emblem. Can be painted in an AMS for a multi color print
There aren't a lot of R53 Mini Coopers on the road these days, and even fewer with the DVD navigation system, but if you have one you're probably staring at the semi-obsolete computer screen (my nav's been broken for years) and wishing…
Requires a heat stake insert and a phone holder. Utilises the bolt holes on center console https://www.amazon.co.uk/gp/product/B08GY1VLDK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
