Ibanez SR600
i have replaced my original battery holder on my Ibanez SR600 for a new one from amazone.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 18
- Likes
- 0
- Rating
- 0
26 models
i have replaced my original battery holder on my Ibanez SR600 for a new one from amazone.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
Wall mount for TP link Archer MR600 ASA 0,2
Nach dem meine defekt waren habe ich diese Räder entworfen. Das Design ist nicht ganz frei erfunden, sondern habe mich da an welchen aus dem Internet orientiert. Das ganze ist mein erstes Modell, bei Änderungsvorschlägen oder sonstigem…
This attachment should be printed with at least 3 wall lines and made of UV-resistant material. PLA is not suitable. I printed it myself from PETG-CF and it has withstood the strain on my DR650 RSE for 1.5 years without any problems. Very…
Dashcam holder for Citroen Berlingo III family (2019+ - also Toyota Proace City, Peugeot Partner, Opel Combo) behind the infotaiment panel. Top part has slot for Navitel R600 dashcam but you can change it for whatever camera you're using.…
Utilizes OE hardware to preserve thread holes and cover area.
Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: WYZ Works PLA Black Category: Automotive
Tool for manipulating mechanicals when you replace the strings
A rear brake guide that fits the mounting bushes on HEL Performance, It will probably fit the old brake lines as well. Easy to print without supports in PETG, print with the fonda text parallel to the print bed. Colour matching optional…
Couldn't buy Honda CBR600F4 replacement, rear brake hose guides as they where sold out everywhere or £30 delivery… seems to do the job, hopefully wont melt, keep zip ties on the hose until you feel it will stand up to the test.
The original rubber brake line setup has a hose line splitter mounted on the right mudguard, new braided steel brake lines often come as a “race” setup, two separate lines meaning the splitter isn't required nor useable as a mount. This…
I made this to mount my router by hanging it from an existing picture hook. I printed it upright with a brim and supports in PLA. If you're going to print this, make sure you have tuned your printer very well for dimensional accuracy, as…
This part lets you mount a Shimano Di2 SW-R600 remote shifter to a bicycle handlebar with 22.2mm (7/8") diameter. That shifter is usually mounted with two zip ties and some tape, but on my bike that was very flimsy and the shifter…
A remix of Sascha4532's excellent r600 wheel, split into two parts to allow for re-printing of the tyre as and when it wears out. The main wheel body can be printed in PETG or PLA, and the tyre was printed in TPU. You can use m5 bolts to…
tool to hold the clutch in order to remove it. made for 1987 XR600 R. Print 2 or 3 times in PLA fit isn't perfect but it does work.
stuntrider DuIvan (https://www.youtube.com/@duivan)
This is a custom-designed spacer for the turn signal lights on a 2003 Suzuki GSXR600 (K3 series). The spacer offsets the turn signal slightly away from the fairing, making the lights more visible from different angles. Useful for…
Deckboxes for the Lair600+ from GameGenic. Fits three boxes per row (see pictures) I tested the box with dual sleeved commanderdecks and diverse sleeves: inner sleeves are always KMC perfect fit(100 pack) Gamegenic-Sleeves - great fit…
This adapter fits inside the throttle switch box housing on the right side clip-on. If the model doesn't fit well, you can make a copy with OnShape, and adapt it there . Warning Use this 3D model at your own risk. The author is not…
Need to disassemble the station, remove the old sockets and replace with printed ones Printing with supports In my case, the fill rate is 100% link to disassembly and replacement video: https://youtu.be/s3aDQyGAlJo Category: Electronics
Eryone PETG-CF
You will need 8 magnets that are 8 mm in diameter and about 2 mm high [optional] You'll also need the small foam piece and the LED sticker, this will allow you to see the indicators through the plastic (see photo).
Replacement for CBR600F4 Fuel tank mount rubber bushings. Filament: TPU 93A, but softer and with more infill is preferred There are to version : 2materialSupport for PLA support in the middle easyPrint for print with out support (angled…
Need to disassemble the station, remove the old sockets and replace with printed ones Printing with supports In my case, the fill rate is 100% link to disassembly and replacement video: https://youtu.be/s3aDQyGAlJo Category: Electronics
With the Smart Relay Holder , you can install smart relays such as the Salsus SR600 , DI600 , or Shelly modules neatly and securely inside a Hager meter cabinet . The holder ensures an organized and stable placement of the relays and…
With the Smart Relay Holder , you can install smart relays such as the Salsus SR600 , DI600 , or Shelly modules neatly and securely inside a Hager meter cabinet . The holder ensures an organized and stable placement of the relays and…