Counting matching models…
This 3D-printed case is specifically designed for the MRA193A PD Board, a USB Type-C voltage and current tester supporting 5-20V adjustable charging. Pinterest The case provides robust protection while allowing easy access to all…
23.08.2023 Added restyling of the previous design (marked "NEW"). 03.08.2023 Added files (.f3d) for creating threads of different hose sizes and a blank of the main part, in which you can place your own thread. Plate size 80 x 100 x 5…
This is a plate for table mounting a Bosch 1617/1618 with the table mount base (RA1165). It is designed to flush mount in ¾" plywood (actual height .72" / 23/32"). I had a ¾ MDF below that to support the plate, but this could be anything…
Sigma Aura 100 gopro Halterung /Sigma Aura 100 Gorpo mount
This variation provides a pretty good fit to the “window” on the RA1161 base. I moved the plastic piece that Bosch provides to cover that window to the other side of the base. Slipping the cover behind the height adjustment shaft is a bit…
Zum Finden der richtigen Position meiner Ra12-Zeichen hilft diese Bohrschablone. Sie funktioniert mit “normalen” Spur N Modellbahngleisen (z.B. Minitrix) und durch die drehbaren Flügel ist sie unabhängig vom Weichenwinkel oder dem…
Portable AC exhaust to 6 inch dryer duct connector adaptor FRA113PT1 Connect Frigidaire FRA113PT1 portable air conditioner with 6inch flexible dryer duct. I bought this portable AC used, it didn't come with the duct or duct connector so I…
The Bosch RA1181 router table does not come with a miter gauge so this solves that problem. This design includes 2 sliders: one with a detent for 15 degree increments, and one with out a detent to allow for any angle to be set. The main…
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.15 Infill: Any Filament: Any Any Any…
This is a model of the Saunders Roe SRA1 from the late 40's I made for a flight simulator. It's a jet fighter that can land and operate on water. Very interesting aircraft and it had impressive performance. Never operational, but several…
UPDATE: I've used 4inch duct for few days, but I felt like its restricting flow so I switched to 6 inch duct. You can use this design if you absolutely need to use 4 inch duct but I recommend 6 inch duct. I designed an adapter for 6 inch…
I mounted the Bosch RA1181 router table on my table saw and mounted a Triton router to it. I wanted a simple place to put the accessories (extra router plate inserts, spanner, lift arm, extra collet) and cord management so that they're…
This is a custom designed clamp-on handle for Dewalt right angle adapter DWARA120 and DWARA60. This right angle adapter can be difficult to hold and maintain the drill or driver alignment due to the torque applied by the drill or impact…
With this product you can quickly convert any yard or meter stick into an easy to use set of Vernier Calipers. While not in use, this product is small and easy to store or transport. VarA1 has been scaled up for added potential use. The…
On my Bosch RA1181 router table, the inset rings (red hole caps) are not flush with the table top. They are low by about 0.4mm. So a created a ring shim that installs nicely on the back of the insert rings. I made it 0.4mm thick but you…
Summary Welcome! This was was my first design. It's a wall bracket for mounting for Roth bookshelf speakers (OLi 1 and OLi RA1, possibly others) I screwed them up directly into wood, but it could be used with wall-plugs into masonry Print…
The Guide Block that comes with RA1171 is not suitable for the Featherboard I built myself.
I didn't like how the DWARA120 sat in the standard Wall Control holder (see photo), so designed a replacement. This utilizes the DDD Wall Control System . I would have preferred to use a 1x2 locking plate, but that is 23mm wide and the…
This little customizable angled case perfectly fits the Eachine TX03 AIO camera. You may have to slightly change some parameters in the OpenSCAD file to match your printer tolerances. The cut on the back-right-side is for the video-in and…
Checkra1n logo Checkra1n is made by Kim Jong Cracks Made in Tinkercad official Website: Checkra.in
This spacer keeps your Mojave Grom battery from sliding around. A piece from Arrma part number ARA-1418. Fits Mojave Grom 3S. Print with flex filament for max shock absorption. To reduce weight and improve shock absorption, print with 2…
for STOOTS CALDERA 1 lamps, the one with the 2 flat telephone-style batteries. 3 types of boxes: -box with cable outlet at the bottom -box with cable outlet under the cover on the RIGHT, this requires removing the cable passage on the…
Bought a couple of these DMX Lightbars, really usefull and work properly. But this „spaltmaß“ bugged me a lot, so I created this bugfix.
This mount will hold the attachment horizontally with the heavy head resting in a cradle that should prevent it from falling out. As you know these things re very heavy on one end.
Some additional feet for LED Bars, if you're planing to use those devices on the gound.
Housing for an E-Switch RA1 panel mount toggle. Pictured with the RA17131123 but should work with any of them. It should be easy to adjust the mount hole dimensions for other switches in the source files. Provides strain relief, access to…
This Sigma Aura 100 Mount has been created from scratch. But as inspiration the Model from @TEDesign was used. My model also uses the same mounting arms as the Model below. So please download those from the Model below to credit the…
for STOOTS CALDERA 1 lamps, the one with the 2 flat telephone-style batteries. 3 types of boxes: -box with cable outlet at the bottom -box with cable outlet under the cover on the RIGHT, this requires removing the cable passage on the…
Postranní kartáčky odešly... takže jsem vytvořil tyto lepení je nutné viz fotodokumentace, zametací součásti je potřeba vytisknout z materiálu FLEX... rotor doporučuji PLA nebo PCTG. Testováno pouze na pevné podlaze, nikoliv na koberci...…
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.15 Infill: Any Filament: Any Any Any…
Print with the front facing to the build plate. Use no supports. Print in your favourite material. Can be glued to a panel. Or remix the FreeCAD file to add a screw thread if you so desire. The entire board should be flush with the front.
20.08.2023 Improved ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: No Resolution: 0.2 Infill: 50% Filament brand: Esun Filament color: red Filament material: PLA+ Slicer: Ultimaker Cura 5.2.1 Wall thickness 4 mm…
