Counting matching models…
Update 2: Added insert caps that fit inside existing sprinkler caps to seal off water flow. I found these work better as you don't need to worry about cleaning up threads. It's also using less material. Update: After being in service for…
These are models for the RainBird 3500 rotor irrigation's nozzles. Unfortunately RainBird does not sell the nozzles for this specific model on a standalone basis. So if its lost then a full new rotor is required. In order to overcome this…
After spending a considerable amount of money on these pop-up sprinklers and needing only the internals, I decided I had had enough. I modeled the internal piece where the spray nozzle connects to your irrigation line. Please note that to…
These tops are always breaking off. I have printed several of these and they have held up for years without issues. Snaps on. You will want to keep the center nut. I printed in PETG and PLA+ white. Included is the model for the center cap
This is a clip to hold the sprinkler rotor shaft when making adjustments.
Sprinkler head grass protector for rainbird 3500 or 32sa, it keeps the grass from getting caught by the sprinkler rotating head. I printed mine with PLA, but I will be reprinting it in PETG because it is going to be outside in the sun.…
The RainBird 1800 HydroCap is a 3D-printable plug designed to securely seal RainBird 1800 series sprinkler heads, preventing leaks and protecting your irrigation system during maintenance, seasonal shutdowns, or water flow redirection.…
I have a key for my RainBird sprinkler controller box and thought it needed a key fob so I don't forget what it's for. I included the original stl file so you can load it up and set your own print parameter or scale it as you see fit.…
https://www.thingiverse.com/thing:3714205 https://www.thingiverse.com/thing:2564456 aus 2 mach 1. Wenn die Last auf dem Halter durch den Wasserdruck auf dem Schlauch dann doch zu groß wird habe ich 2 kleine Löcher in der zweiten Version…
Fit's a regular 3/8's rachet. The extra holes are to give it some extra cranking power if needed. I find loosing up the dirt around very tight ones helps. Recommend 3-4 outer walls and a thick infill 40%+ for max cranking power. This…
This is a replacement for the Rainbird PA-8S adapters for shrub spray nozzles. The top male thread is a proprietary, 5/8 in, 28 TPI (Threads Per Inch) unified fine style thread. The 1/2 in female NPT thread has some steep overhangs so a…
When you need to remove or raise your rainbird sprinkler, remove the top cap and use this tool with either a 52mm socket, or a 1/2" drive and a socket wrench to spin out the body, service it or add a riser then put it back in. It saves a…
Ein simpler Ringschlüssel für das Filtergehäuse (Typ LCRBY100D und ggf. andere mit demselben Deckel) einer Rainbird-Bewässerunganlage, da es ein Krampf ist, den Filter nur mit den Händen zur Reinigung zu entnehmen. Wie üblich bei solchen…
This bracket mounts a RainBird automatic sprinkler control to a wall. This is a common watering control, as available from Amazon, big box stores, etc. The bracket has a lot of meat and engages the control positively. All buttons are…
When you need to remove or raise your rainbird sprinkler, remove the top cap and use this tool with either a 52mm socket, or a 1/2" drive and a socket wrench to spin out the body, service it or add a riser then put it back in. It saves a…
Ein simpler Ringschlüssel für das Filtergehäuse (Typ LCRBY100D und ggf. andere mit demselben Deckel) einer Rainbird-Bewässerunganlage, da es ein Krampf ist, den Filter nur mit den Händen zur Reinigung zu entnehmen. Wie üblich bei solchen…
Quick and dirty Rainbird 700 main nozzle template, modeled after the blue nozzle. Tested and confirmed works, but unverified if it matches the oem nozzle for gpm and coverage
Tool to remove the top of a Rainbird 5000 sprinkler Print Settings: Material: PETG Infill: 15% Perimeters: 4
Rainbird no longer provides replacement parts for the antenna shroud for the rain bird remotes. I designed a replacement part for my irrigation guy. This part was printed in tpu with PLA as a support.
Multiple models available here: Connector 1-to-1: An exact model of the connector manufactured by Rainbird. Not really printable. Connector Printable: 1/2 of the connector, modified slightly to enhance printability (overhangs tapered). To…
Edit: 3/5/25 Added new images (green models in images) to show the latest version of the parts and new STL and STEP files for the 2 new pieces. The horn to valve knob adapter is unchanged. This version has a few mm of slide to accommodate…
