258 models
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Print approx. €25.42–€31.07 excl. taxPreliminary estimate for one variant
"Igor, throw the switch!" "Yes, master." Instructions Check out the 2022 updated version posted here: https://www.printables.com/model/161850-frankenstein-lightswitch-plate-2022-version Update: It's coming up on Halloween so I figured…
Igor, throw the switch! Yes, Master. ---------- I originally designed this seven years ago, and figured it's high time I made some long needed cosmetic updates: The blade portion is now symmetrical in both the ON and OFF positions, the…
This Frankenstein head incorporates fascinating features: 3D printed, the hair part doesn't need supports, and the head was printed upside down with custom supports at key edges. An easy-access cap allows you to customize the internal…
A set of 3 Halloween bookmarks featuring a ghost, Frankenstein, and a pumpkin jack o lantern. They’re quick to print, thin enough to slip into any book, and perfect as little seasonal gifts or party favors. Print them in festive colors…
Frankenstein Bust. The back of the head is Meh. Did not pick up the UV displacement. Really no UV resolution towards the back so it was just flat.
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ Fits 12oz, 330ml or 375ml cans. Comes in multiple versions, with and without a handle and with and without a…
Join here to get access: https://www.patreon.com/kogi3d I went full Halloween mode with my new Articulated Frankenstein Hand! This creepy hand features a chunky Frankenstein-inspired design with stitched details, scars, fingernails, and…
Magnet Ivy – Flexibler Efeu-Kühlschrankmagnet mit beweglichen Ranken (Print-in-Place) Mit Magnet Ivy holst du dir ein stilvolles, natürlich wirkendes Dekoelement an jede magnetische Oberfläche – ob Kühlschrank, Whiteboard oder…
Figurine of a grumpy mini Frankenstein. https://youtu.be/svMf4KwcbEI Printing Can be printed in both FDM and resin Supports are NOT required when printing upside down with good cooling Minimal infill required All Sculptember Models Ghost…
Franken-Stein Can Coozie with flip top. Recommend at least 3 walls to make sure the top pegs can snap into the handle without breaking. If your printer can't do large bridges then a little support on the underside of the top part of the…
Halloween Special Transformable Frankenstein to Coffin This is not my creation, but i found this model from Toymakr3d and it is so cool that i don't want to conceal it. If you like it --> press like it :-) Here the original description:…
Frankenstein - Halloween Mask
I am fairly new to JOTL, but I liked UnclePats player dashboard so much (lightweight, easily fits into the games box (even two of them like in my case), easily to understand but still versatile layout, ...) so much that I tried to improve…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print standing with support Improved my previous oculus quest 2 headstrap adapter: https://www.printables.com/model/578398-frankenquest-htc-vive-das-adapters-for-oculus-ques Some were already prefering it for quest 3, but now you have…
The model combines a functional mechanical design with a fun Frankenstein/Halloween appearance, making it suitable for makers, workshops, garages and Halloween projects. 🖨 Features 🧟 Frankenstein-inspired monster design 🥫 Designed for…
****Find all of my exclusive content on my Thangs.com profile **** This chunky Frankenstein's Monster kit is roughly 6.5 inches (17cm) tall once assembled. Shop the filament we used in this model on our Amazon Storefront As with all of…
Made with files from Printables and Thingiverse. Adjustment made to bolts and headband using TinkerCAD. Locking sleeve made in TinkerCAD.
This is a remix of the one made by Sekazi. Its been modified to fit the quest 3. Ensure you print it standing up (default orientation of the model) with supports otherwise the clips will break. It is a bit of a squeeze to get it in place…
This is a pair of "Neck Bolts" for a Frankenstein('s Monster) costume. Instructions Print in a silver or grey color, or paint the "bolt portion" to look realistic, if desired. I advise against painting the disc portion at all, especially…
Frankenstein's Monster neck bolts for Halloween costume. Bolts and neck band printed separately and connected with M2x8mm screws. Band simply sits around back of neck
The first creature to be featured in The uppalong Halloween Hullabaloo is the The Modern Prometheus aka Frankenstein’s Monster. The Jack Pierce/Karloff version is one of my absolute favorite character designs of all time so this has…
Pretty much summed it all up in the first part. To install, place the underside clip in first with a slight angle or the right side upwards ready to feed that in. I've added screenshots to show the difference.
This undead head has a flat top so it can be used as a table or shelf. He won't complain. Supports Required. Can also be stacked or used as a table. Tree Supports on build plate only Powered by image-to-3D from MakerWorld…
A new 3D figurine generated by AI, a Chibi Frankenstein. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I like the Filamentalist F1 mod but also like the way the Filamentalist Rewinder fitted in the enclosure so I made this I printed in ABS using the Voron Print Specs Amount of filament used approx. black 90g red 70g BOM Qty Part 2 8mm x…
A stylized bust of Frankenstein with exaggerated facial features, intricate details, and crafted precision.
Bust of Frankenstein adopted to hold your headphones. I've found this model and thought that it would be super cool to color it and use as headphone holder. I've coloured it, modified to be bust and stay as is and hold headphones.…
This is an old project of mine - my version of Frankenstein's creation. It's currently a bust but I intend to make it a full body character, so stay tuned ;) I've included just the sliced off face as a test print because it requires no…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Can holder in the shape of the Frankenstein Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, Automatic Tree…
A skull of Frankenstein's monster.
Didn't find any adapters that was perfect for me so created my own. Inspired by: https://www.thingiverse.com/thing:4654892 Like the cable going behind/inside. My design is however only reusing parts from:…
Here's my Diorama for Wekster Mini Frankenstein. Most of the parts will print with no support if oriented correctly. The metal cables from the wall are not 3D printed and not supplied with the files:) Hope you have fun and please post…
Frankenhooker from the movie by the same name
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A couple of the parts require two - check the picture. Modeled to tight tolerances for better action, if your printer is a bit “fuzzy” file or sand the openings - It should not take much. (Prints perfectly on my MK3s.) No supports needed.…
This light switch, designed by LoboCNC, is a flip switch from Frankenstein that captures the look of a mad scientist's workshop. It can be used as a gag gift, a room upgrade, a Halloween decoration, or even as a legitimate switch for…
Made these last minute for a work college how mentioned he was going to a fancy dress party as Frankenstein. I joked about him having neck bolts but said he didn’t have any. So I quickly drew these up and printed them out. The magnets…
The champion took a souvenir from each defeated foe. In the weekends he is Mary Shelley's personal limo.
The light switch in my office is larger and requires a little more force to operate than a standard switch, so I made this larger nubbin to fit.
A fun, Halloween-ready ring based on the iconic Frankenstein’s Monster. This stylized wearable is great for themed costumes, party accessories, or just adding a bit of character to your print collection. 💀 Easily resizable in your slicer…
Remixed to allow for an LED Tea Light which makes the brain glow. Raft: yes Supports: yes (tree) Layer Height: 0.2 Frankenstein's Monster LED Tea Light Holder Remix by: Robert Martin Remix on: 10/20/2022 Original License: License:…
A sculpture dedicated to Marty Feldman, the iconic Igor from the fantastic film Young Frankenstein . Unforgettable.
Hammer Films Scenes - The Revenge of Frankenstein - 1958 3D printable model.
Update 22/5/2026 Added STEP file (im forgot lol) same build as G96 Work with WE TM Airsoft version
Hammer Films Scenes - The Curse of Frankenstein - 1957 3D printable model.
Re -vamped Version of my Candy Holder/Dispenser. All walls have been smoothed out and the internal components have been made thicker to minimize breaking. Confirmed printed and working. Only 2 parts so size is limited.
Say hello to that loveable old green guy, Frankenstein's Monster!
Frankenstein Trophy, made for a school project as prize for the game.
https://github.com/kevinakasam/FrankEnstein-Duct/tree/main/Frank2.0_Beta Use a V6 hotend (non-volcano) with the Frank2.0 ecosystem. Only tested using the linear rail mount. Mounts for the sherpa mini and orbiter 2 are included. Klackender…
Cable Clip for HTC Vive Deluxe Audio Strap designed for the Franken Quest to manage 2 cable sizes. 1 is 3.5mm (common size for USB C charging cables) and the other 6mm (used for aftermarket Oculus Link). I have now added another clip…
UPDATE Feb 6 2023 Tweaked 5015 duct to align better with the nozzle. This is a remix of kevinakasam's FrankEnstein duct originally for the Ender 3. (https://github.com/kevinakasam/FrankEnstein-Duct) I have not printed this exact version…
Fillamentum have a great little guy and they are encuraging everyone to get creative and remix him into something new. so here is my FrankenFELLA I hope you enjoy. Thanks Bugman If you like what I am doing please consider buying me a…
WITH THE NEW v1.3 PCB FOR THE V10, EVERYTHING IS FIX IN TERM OF LATENCY, GET THE KIT FROM INDUSTRY&CNC AND EVERYTHING SHOULD WORK The V10 gearbox is a huge step ahead from the V9.1 in term of smoothness and simplicity of fabrication and…
Young Frankenstein - Puttin' On The Ritz - 1974 3D printable model.
I am a wire management freak so I needed a clean wire clip/solution for my rear mounted battery to the Oculus Quest 2 headset. I run the headset wirelessly, so no need for an additional tether clip. The single clip is for a 3.5mm wire…
Hammer Film Scenes - Frankenstein Must Be Destroyed - 1969 3D printable model.
A little dude that I made on tinkerCAD. I couldn't find any files to “yoink” off of Thingiverse so I made one myself. I printed these in white and paint the other colors, but you can make it multicolor if you know how to do that(I don't).
Cuten up your Halloween table with these cute monster coasters. Not even monsters should be alone, so we've created this cute Bride of Frankenstein coaster to go along with the set. Multi-color Printing Tips (for 0.2 layer heights): I…
Hammer Films Scenes - The Curse of Frankenstein - Monster with Girl - 1957 3D printable model.
Stretcher for the 800 model helicopter EC145
Hammer Films Scenes - The Evil of Frankenstein - 1964 3D printable model.
Frankenstein Wall Art - Designed for print on BambuLab Printer with AMS unit. I use these brackets to hang it on the wall, this makes it very easy. I have include commercial rights to this file - Enjoy!!
Frankenberry Kaws Sculpture! Please like and follow for more!
I found that the repaired DAS mod still had some errors in it. Took another stab at fixing those errors. Additionally, I cut off the bottom ~1mm to make for a larger build plate surface area so hopefully it prints OK without a brim.…
Get ready to family friendly Halloween with one of the great classic movie monsters: the Frankenstein Swing set! Here we have legend himself lending a helping hand (or arms) to some of the local creatures of the night for a midnight swing…
AI-generated Frankenstein's monster. Requires supports.
Inspired by classic monster flicks and forged with jagged styling, this mask features cracked surfaces, stitched seams, and embedded bolts—perfect for cosplayers, collectors, or anyone who enjoys wearing their nightmares. Print Settings:…
A spooky yet cute Frankenstein pen holder. Use it on your desk, in your office, in your kitchen or anywhere you need a little fun.
elsa lanchester
This is mashup of 2 designs. My problem is depth of a printer. If a spool would be in front of a printer, my kid would sooner or later knock it of. So I was in search of other solutions. @ Taer.Holmes was on a right track, but I didn't…
10 cm - 1 Part Des Cadeaux pour Noël 2020 ! https://youtu.be/JpHoKxPGJoo Facebook : https://www.facebook.com/B0DY3D Team BODY3D : https://www.facebook.com/groups/492474174608397/ Instagram : https://www.instagram.com/body.3d/ ArtStation :…
Frankenstein monster funny character figure playing guitar, scanned by a real statue with revopoint pop2 scanner. Good for halloween decor
Münz-Aufbewahrungs und Sortier-Helixe für Euros (verschiedene) und Schweizer Franken (eine Version). If you want other coin formats feel free to contact me ;-) I'll do my best.
Hammer Films Characters - The Curse of Frankenstein - The Creature - 1957 3D printable model.
Followed the guide here to convert my Da Vinci 1.0 Pro to a Bigtreetech controlled version. Some differences, but the Marlin 2.1.2 settings were the most difficult. Use these endstop conversion prints to use these mechanical endstops.…
Here is a nice little mashup of Hello Kitty and Frankenstein, perfect for Halloween Decor! Hope you like! Want a Commercial License to sell my prints? Join my Patreon or Thangs as a paid member 😊…
Frankenstein accessory for neck, it was for my 8-year-old daughter's fancy dress outfit, she was going as Frankenstein's Bride
