327 models
Don't forget to like this model. Pre-sliced gcode by ryanL You can check his made in the comment session. Multicolour pose. Category: Sculptures
Print approx. €40.81–€49.88 excl. taxPreliminary estimate for one variant
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
Don't forget to like this model and sub my YouTube channel. Category: Sculptures
Print approx. €46.27–€56.55 excl. taxPreliminary estimate for one variant
Filametrix Mod This is a mod of the Voron Stealthburner which adds a filament cutting possibility! Main Body Main Body with Filamentsensor Option has been added. - SB_CW2_Main_Body_Cutting_with_2xD2F_ECAS -…
This is a remix of the encoder cart in the Enraged Rabbit Carrot Feeder to act as a standalone filament motion sensor for your 3D printer. Unlike other filament motion sensors, it adds very little resistance and I have no issues with…
Galileo2 (G2E) with filament runout sensor. - ECAS-Fitting compatible. - Step file included. - No change in overall G2E dimensions BOM: 1x Omron D2F microswitch 1x 5mm steel ball bearing (optional) 2x M2x8 self tapping screws (You might…
This is a modified Orbiter 2 filament sensor body that is designed to be used with the ERCF system as an extruder sensor. It could also be used as an ordinary filament sensor, but the sensor the Orbiter creator built is great so I'd…
This model was designed to mount the ERCF on top of a Voron 2.4 or Trident printer. It consists of three identical arms, and a bottom plate that moves the mounting hole locations, and provides a place to attach an EasyBrd. The top arms…
…Please be sure to hit like & post a make, I'd love to see your prints! Print standard VORON settings, no supports required!…
Update: I made the ECAS hole tighter with the anchor groove from 8.5mm to 8.3mm and added STEP file Switches are Omron D2F or compatible. Ball is 5.5mm Selftaping screws 2x10 or M2x8 Tested with TPE88 filament. If you want use both…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
I wanted a dead simple top mount for my Sturdy Bunny v2 ERCF without using any 2020 extrusion. Taking inspiration from jeoje's Sturdy Handles I made two platforms that mount to the frame using a single M5 roll-in nut and M5x10 bolt.…
Entire build of the 8 channel Ercf v.2. Id suggest downloading the part tracker to be able to keep track of what you've already printed and what you still need. All parts are already oriented correctly ands set for an 8 channel with BTT…
This one is for the crazy people out there!^^ The thread allows you to screw in an PC4-M6 bowden coupling which holds the PTFE tube securely. This is mandatory for using the Enraged Rabbit Carrot Feeder (ERCF) with your V0 or another…
Remix to 5 colours support free and printed. Time-lapse print video : https://youtu.be/0M-ffuzG0dc Subscribe and stay tuned for latest support free and multicolor stl remix! Category: Sculptures
CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…
A Mount for a 6N,9N&12N ERCF on the Back of a 250x250, 300x300 & 350x350 Build Volume V2.4 or Trident Addet 200er version (only n6 +n9) (not testet) You need also : 4x M5x25mm +…
This is an altered version of my Afterburner Galileo extruder for the new Voron Stealth Burner toolhead. This accommodates a 7mm ball bearing and microswitch to detect filament after the extruder gears as required by the Enraged Rabbit…
ERCF EasyBrd/CAN Brd mount for TR. Add notch for CAN board XT30 connector. It is designed to be mounted under the LANE side
The existing ECAS mods for CW2 didn't work great for me, so I quickly made this to allow me to run a Bowden tube from my CW2 to the ERCF unit I'm playing with at the moment :) ( If you have fitment issues with the ECAS, give me a shout on…
Bonjour, Edit : ajout porte lame V2 (Meilleur mouvement, ajout d'une courbe sur le levier coulissant permettant de réduire le mouvement lors de la coupe) Fichier Zip Réalisation de la V2 du filament Cutter pour Sherpa Mini (Compatible…
Operation Filament Stress Sensor detects filament Tension (Stretch) and/or Compression (Pressure) and signals Happy Hare software and ERCF v2 accordingly. Two discrete signals are output, one for Compression and another for Tension. These…
2024-05-25 Repositioned Blade on Cutter Gear (V2) to afford additional clearance mounting screw head to Encoder housing. Replaced Fusion 360 file and added [a] Cutter Gear v2.stl. The original design was well thought through but lacked a…
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
Simple remix of the existing ERCF Easy Brd mount to work with both the Easy Brd and Fysetc Rabbit Burrow Board
UPDATE for the 2023-07-10 version : The upstream model by @nhchiu was updated with some fixes. I uploaded an updated main body STL for LGX gears and with the ECAS coupling because that's what I personally use in my extruder. The other…
Print as you would the standard Voron parts, this version should be compatible with the Rapido V2 based on moggieuk's ERF Filament Cutter release (2024.01 version).
1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler. This uses the latest model from the…
Edit : ajout de la version Xol (Non testé pour le moment) Edit 2 : ajout du fichier Step, je suis en train de tenter une version avec levier mais pour le moment je suis limité dans mes compétences en modélisation Filament Cutter pour…
NOT TESTED, WAITING FOR PARTS !! ONLY FOR TESTING !! now I'm editing for Filametrix mod… Sensor before extruder - only click Sensor after extruder - screwed For assembly: 2x sensor D2F-5 2x ball 5,5mm 2x tapping screw M2x10
A mod for Voron Stealthburner LGX lite ERCF EBB cover. For those user that using BTT EBB36 v1.1 or v1.0 CanBUS board. Hardware BOM: Qty: 2, M3x30
These brackets allow you to mount the ERCF on top of your Voron 2.4. They have the perfect angle to mount the ERCF with ERCT buffer, allowing enough space for quite comfortably routing bowden tubes into the Cotton Tail buffer. Three…
A tinkercad mockup between. https://github.com/elcrni/Voron-Mods/tree/main/Orbiter_2.0_SB_CW2_Enclosed and https://www.teamfdm.com/files/file/485-orbiter-2-clockwork-beta/page/3/?tab=comments#commen to make the Orbiter 2.0 ready for ERCF…
A standalone filament pre-gate sensor that uses lever switches instead of the more typical ball bearings and switch approach. This sensor can be used both for the ERCF/Tradrack MMUs using Happy Hare, as well as a standalone filament…
I was maxing out my stepper's rpm when trying to feed the ERCF faster than 125mm/s, to fix this i needed to change the gear ratio. When swapping to this gearing you'll need to change the gear ratio in the stepper config to 2:1 and re-do…
Remix to multicolour support free and printed. Time-lapse print video : Subscribe and stay tuned for latest support free and multicolor stl remix! If you have 5 colour feeder such as prusa mmu, you will need the following.…
Improved filametrix cutter.
I couldn't find any 2040 extrusion brackets for the top of my Voron 2.4 350mm. The ERCF v2 has a 20mm offset of it's legs on the right side of the unit. Also have a 2020 extrusion version to match. Voron logo on the sides. These brackets…
See also https://www.printables.com/model/792166-winchrack_type2-v2-for-ercf-or-tradrack-buffer (for some reason printables wouldn't allow me to make this the original) I was impressed by this elegant and simple rewinder design, and…
This version of the Afterburner Galileo extruder accommodates a 7mm ball bearing and microswitch to detect filament after the extruder gears as required by the Enraged Rabbit Carrot Feeder as a filament sensor. Can be printed in ABS+ or…
The function is same with the normal CW2 main body use on ercf, but is lighter. Print Settings Printer Brand: VoronDesign Printer: Voron2 250 Rafts: No Supports: Yes Resolution: 0.15 Infill: 20 Filament: Other ABS Black Category: 3D…
This is a simple no hardware required, easy to print spool, Simply cut away the cardboard spool and fit some cable wraps/ties around the filament, slide it off the cardboard, onto the plastic then screw the 2 halves together and snip the…
I found it quite difficult to mount the ERCF on the top or back of voron 2.4 printer, the back panel makes things difficult… Also all the existing mount options floating a round I can find, I don't like. some even require expensive and…
This is the Support Arm Endcap for the Enraged Rabbit Cottontail Buffer for the ERCF v2 remixed to accept a BTT MMB CAN v2.0. The only change from the original v2 assembly instructions is the addition of two more m3 heat set inserts.
TowerPro MG90S offers a maximum of ~1.84 kg/cm torque at 5V; the alternative option Savox SH-0255MG offers ~3.4 kg/cm torque at 5V. However, Savox is significantly more expensive. TowerPro MG92B has nearly identical dimensions as…
Preliminary design to mount MMB between the rails. Standard M3 Voron heat inserts for use with M3 hardware.
** I make no claim this works, I printed mine, and they work well, but I am not great at 3d models I'm sharing this because the original model is great and way sexier, but I had already cut my extrusions short. While I extended the upper…
stealth burner Rapido v2 UHF ERCF Filament cutter with longer ducts
He modificat les peces originals de VoronDesign per tal de poder-hi encabre-hi un sensor de filament identic al que han dissenyat per a la pota trasera de la V0.2r1. La part midBlock és la que he hagut de modificar més i no ha quedat tant…
This allows the fitting of a Servo to the stealthburner with filamatrix filament cutter to automate the cutting, it's designed to mount to the original cable bridge holes and the cable bridge included is that of the EBB Stealthburner…
This is a "simple" mount for an ERCF to be attached to the top back corners of Creality K1 series printers (Max, K1c). At the moment, the project includes several variations for you to choose from. If you prefer to mount your ERCF on the…
10/13 Added NEMA14 support. FYI NOT BEEN TESTED. 10/20 UPDATED CALIBRATION INFO 10/21 UPLOADED 5MM TO 5MM COUPLER ERCF2 Direct Drive NEMA17 Mod – Ingeniously Simple, Remarkably Effective Upgrade your ERCF V2 with this direct-drive NEMA17…
This model will allow you to mount your EasyBrd underneath the body of your ERCF. This retains the original mounting hole pattern. When the ERCF isn't mounted, the heat sinks will stick up past the feet. Be careful not to knock these off.…
BOM: 2x D2F-L switches 4x M2x10 screws (I use self-tapping to thread easily into the plastic) 1x PC4-M4 fitting 1x PC4 fitting (I think any size thread will work because the thread isn't used, but I'm using an M10 one) PC4 clip Whatever…
Easily identify which PTFE tube is coupled to which input of your MMU2S or ERCF. The included STLs have the base component and 2 number parts included. Important: Use the Split → To Parts function (once the part STL has been imported and…
The top lid will also fit the original designed base, so could just be added. Note that two versions of the lid exist - one with additional holes to fit the Easy Brd heatsinks.
For ERCF v2: Clockwork2 body (new Version) modified incl BigTreetech EBB v1.2, Toolheadsenor, Entrysensor, ECAS and Filamentrix Cutter for ERCF v2 included: BTT EBB v1.2 STLs Latch (new version) slicing with prusa/orca slicer works well.…
ERCF v2 2020 Mounts These mounts are made for the ERCF v2 and they are able to mount it to the top of a single 2020 extrusion (bedslinger printers usually have this on the top of the printer). BOM 6 x M3x8 SHCS 4 x M3 heat set inserts…
Stout handles with accessory mounting holes and ERCF mount Use standard VORON apart printing guidelines. The ERCF mount was designed to use 400mm extrusions on a 350^3 Voron 2.4 Handles mount to 2020 with a t-nut and M5x12 SHCS Category:…
If you like this model and use it please upload a like, it really helps others find it! I wanted to use less plastic, verify it was v2.0 of ERB compatible and convert the ERCT to use the new fysetc ERB v2.0 which lets me expand to 12…
This conversion makes filament selection much more reliable and precise with very few additional parts. This also solves all the issues with belt tension or belt grip. All parts can be found on amazon. You will need a generic 8mm lead…
This is motor buffer in Samla box from the store https://www.printables.com/model/1185160-motor-buffer-for-mmu-in-samla-box (sorry it's not free) This is newer version of buffer in Samla box 2024 ( use this instead)…
The ercf’s tool head sensor with ECAS 9/19 Update step file Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Other ABS Black Category: 3D Printer Extruders
Grinches Coffee Designed for Colour change at layer heights. Step File included has all colours at the same layer height to print face down for a nicer finish than the different layer heights version
mmu 7 ercf buffer with 7 slots instead of 5 print in abs+ layerhight 0.2mm without support
It was easier/cheaper for me to find 400mm aluminum extrusions pre-cut online compared to the 410mm this original design was built to work with, so I extended each bracket by 5mm. I imagine 450mm and 500mm pre-cut lengths will be…
This is a remix of a remix of the encoder cart in the Enraged Rabbit Carrot Feeder to act as a standalone filament motion sensor for your 3D printer. Unlike other filament motion sensors, it adds very little resistance. Also unlike a…
A small easy to print comb that holds the PTFE tubes at the correct height to prevent the tubes applying pressure to the gates. Printed mine in PLA and it works fine, recommend ABS if its within a warm area.
Use V623 bearings and add a bracket on the top for installation. For other installation instructions, please see the link below.
here is my Jail Bird modular filament buffer system it is modular so it is infinate expandable, designed to be used with all ercf, mmu & tradrack systems as well as stock printers, this is my v1 and will be work in progress but works very…
Mounts your MMB to your ERCF with a topper to keep your wiring away from your encoder cart. The alternate topper covers all the endstop ports - they're still usable, but it's a tight fit and I don't use it. Be aware that the BTT MMB…
this mount works with any 2020 extrusion. mine is on a voron 300mm printer using a 400mm extrusion. all that is needed is 16 m3x8 screws and t nuts or inserts for extrusion 8 m3x8 screws and t nuts for mounting to the top of the printer…
This mod is to be use with 500mm extrusions that are easier to buy without custom orders. I also gave it more depth inside to grab more of the extrusion and be more steady. This is for the Voron 2.4 350mm version. The extrusion that I…
see https://github.com/Annex-Engineering/Belay/tree/main Enables option to define and use both: sync_feedback_tension_pin: sync_feedback_compression_pin: Has longer travel distance, which eliminates under/over extrusion printing at higher…
This mod lets you use the enraged rabbit burrow board with the new ercf v2 with or without the cottontail. I also included a cutout for a step down converter, which i use to power the rgb lights and a filament cutter servo.
## New changes in Version2 (this version) VS version1 (Version 1 https://www.printables.com/model/971423-ercf-v2-selector-mod-for-larger-28mm-17g-servo * In version1 servo arm cannot touch the filament block top hat to release brake. The…
After I finished my Ercf v2 build I was immediately annoyed by the Cottentail buffer system, way too difficult to load and way too much drag. I modified the coupler blocks so they run in a straight line and kept other original features…
Here Are you seeing , an Gantry Servo Depressor for the Filametrix or the FilamAtrix. This Servo Depressor works with the normal Filametrix or FilamAtrix (CW2 and G2E) Material are needed: 1 x M3 Heatnut 1 x M3 4x3x5 Heatinsert (short…
version2 is now released https://www.printables.com/model/1006480-ercf-v2-selector-mod-for-larger-28mm-17g-servo-ver # ERCF V2 selector mod for larger 28mm (17g) servo ## What: for ERCF V2 enraged rabbit multimaterial system.…
This toolhead sensor uses a micro switch and a 7mm ball bearing to detect filament after the extruder for use with the ERCF. and is compatible with the big tree tech EBB 2209/2240. It also uses an ECAS bowden clip.
A slight modification to a very nice designed drag chain at https://github.com/Tigra-Astronomy/ERCF-drag-chain that simply has a slit in one side just wide enough to pass a single wire through to allow threading whilst retaining any…
Stepper motor is mounted from top to bottom. 4x M3x20 screw
ERCF EREC Encoder Mounted Filament Cutter Reinforced with 2 extra screws on the middle/bottom side
the support can be easily removed M6, M10 and ECAS Coupler
For those that use the canopy in my other files or some other variant with similar middle (will work 250, 300, or 350), this mount will allow you to attach your ERCF v2 on top. There is a new End Bypass with channels to run wiring under…
I have re-modeled all the pieces to accommodate a Stealthburner with the following modifications: Chaoticlab TAP CNC (I am pretty sure everything works just as well even if you do not have a TAP, however it is untested) Bigtreetech EBB42…
There are two changes compared to https://www.printables.com/model/426754-stealthburner-clockwork2-main-body-with-ecas-and-r : ECAS hole has small o-ring of 0.1mm to make ECAS stay in place, as depending on how it is printed it is not…
A Mount for a 9N ERCF on the Back of a 300x300 Build Volume V2.4 You need also : 4x M5x23mm + https://github.com/Tircown/ERCF-easy-brd/blob/main/mods/Bottom%20bracket/ercf_easy_brd%20bracket%20bottom.stl and…
Removed the holes for the microfit connectors and added the EasyBRD text as for the original version which had both.
A link for the coupler blocks and mmu board mount. https://github.com/Tyler8299/CottonTail-Lite
Gear Box Back to use common type 80T CNC pulley Let ERCF V2 use common type CNC metal 80T pulley There is nothing wrong with 3D printed plastic 80T pulley, instead, I think it's one of the most useful invention of the year, because 80T…
This is a remixed version of the popular Enraged Rabbit Carrot Feeder smart filament motion sensor, designed for Creality K1 printers and available here on Printables. I have been using it on my K1 and K1M for about six months with no…
To color the logo you'll need to split-to-parts the stl once opened. Two sizes, one (20mm) spans over the 2020 extrusions, so the length needed is the same as the front brace 2020 on the printer (depends on printer size of course). The…
# ERCF filament Cutter beta7 mod ## What: for ERCF V2 / ERCF Filament Cutter Beta7 https://github.com/kevinakasam/ERCF_Filament_Cutter * it fixed or improved a few problem in the beta7 design * it works with my ERCF V2 28mm servo mod,…
WinchRack_Type2 V1 for ERCF buffer youtube WinchRack_Type2 V1 Testing video : https://www.youtube.com/watch?v=6KahxyvfvtI ERCF(당근)과 연동하여 테스팅한 유투브 영상입니다. youtube WinchRack_Type2 V1 Applying ERCF video :…
Some PTFE tube combs for better tube management. Various shapes and holes. Created for setting up my new build of an Ultimulti from scratch. Only need a few but I'm sharing these files. My printing params on my Ender3v2 : Filament : PLA…
A solution to mount an ERCF v2 on top of a Voron Switchwire. The ERCF is angled by 60° upwards for better access. Parts are pre-orientated(Credits to Nero3D). EDIT 1: The Parts are a very tight fit and need to be slided onto the extrusion…
Was looking for a top hat that could accommodate the ERCF V2, and was not able to find any. I have modified this one to suit. EDIT 8/7/2025: Have added holes for heat sets to allow for panel clips.
A simple holder for LED stips supplied in ERCF v2 kits by Fysetc. Works with any vanilla (non-Fysetc) ERCT couplers – both 90° from RC1 and 180° from RC2. If you don't like the couplers provided by Fysetc, or if you already printed all…
![Galileo 2 (G2E) Filament runout sensor (UPDATED) [Filametrix and ERCF compatible]](https://media.printables.com/media/prints/643093/images/5077730_2e554cb6-2575-420e-bb02-eb9297ec54fb_2b773503-77b1-47cf-bd2d-d7ff2e546f65/pxl_20231110_184825771.jpg)
