ERCF v2 mounting brackets for Voron Switchwire
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ERCF v2 on top of Switchwire frame. Angled 60° upwards for accessibility.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 107
- Makes
- 0
- Views
- 969
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
A solution to mount an ERCF v2 on top of a Voron Switchwire. The ERCF is angled by 60° upwards for better access.
Parts are pre-orientated(Credits to Nero3D).
EDIT 1: The Parts are a very tight fit and need to be slided onto the extrusion from the side.
Hardware you will need:
Frame mounting→4x M5x16 BHCS, 4x T-Nut M5 (3030)
ERCF to brackets→ 4x M3 heatset insert, 2x M3x8 SHCS (bottom), 2x M3x10 SHCS (top)
Enclosure?
I will enclose my printer soon. At this point I am not able to tell you, what modifications are necessary to the enclosure panels.
EDIT 2: For now it seems, that this mount is not compatible with the stock enclosure. The ERCF should be positioned a few mm more to the front of the printer and may be mounted vertically. You will definitely lose some Z height with an enclosure, because the bowden tube needs to go somewhere. If I have a good solution, I may update this or upload a whole new design.
23.03.25 - Included step files for each part.