ERCF v2 mounting brackets for Voron Switchwire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ERCF v2 on top of Switchwire frame. Angled 60° upwards for accessibility.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 969
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A solution to mount an ERCF v2 on top of a Voron Switchwire. The ERCF is angled by 60° upwards for better access.
Parts are pre-orientated(Credits to Nero3D).
EDIT 1: The Parts are a very tight fit and need to be slided onto the extrusion from the side.
Hardware you will need:
Frame mounting→4x M5x16 BHCS, 4x T-Nut M5 (3030)
ERCF to brackets→ 4x M3 heatset insert, 2x M3x8 SHCS (bottom), 2x M3x10 SHCS (top)
Enclosure?
I will enclose my printer soon. At this point I am not able to tell you, what modifications are necessary to the enclosure panels.
EDIT 2: For now it seems, that this mount is not compatible with the stock enclosure. The ERCF should be positioned a few mm more to the front of the printer and may be mounted vertically. You will definitely lose some Z height with an enclosure, because the bowden tube needs to go somewhere. If I have a good solution, I may update this or upload a whole new design.
23.03.25 - Included step files for each part.