Counting matching models…
BOM Besides the printed parts you need of course the: 6x 608 bearings 1x 5mm steel rod with a length of 135mm (+ M5 tap) or directly as threaded rod. 2x M5 nuts 6x Pneumatic connector with M6, M8 thread or Ecas (choose correct PatchWall…
Remix to multicolour support free and printed. Time-lapse print video : Subscribe and stay tuned for latest support free and multicolor stl remix! If you have 5 colour feeder such as prusa mmu, you will need the following.…
Remix from the Customizeable Filament Holder from HugoHuge (thing:3020026 on thingiverse) Low Friction Spool Holder for the Enraged Rabbit Carrot Patch from the Enraged Rabbit Project. This is a drop in replacement for the standard Spool…
This is a way to mount several filament spools and buffers on the back of a Voron 2.4 or Trident. It keeps most of the original ERCP parts and only changes the cross piece and includes a newly designed frame mount, spool rest, spine, and…
Replaces the original foam/plywood motor mount for any electric aeroplane that uses two pieces of 6mm depron foam crossing to form the motor mount bulkhead. Print in PETG for toughness and heat resistance, 0.2mm layers and 50% infill. No…
It improves the filament unwind. With the original U Profile the fila is always crossed. With this profile a kind of automatic alignment is created. Also this wheel extend the free space to the frame.
Feets for the ERCP to use it with the RepRack System. It is Designed as a one to one replacement.
These feet replace the [a]_Feet_x2.stl of the ERCP and allow you to place the ERCP onto a RepRack
Use m3 nuts and bolts to fasten ERCPs to racks Use m5 bolts to fasten racks to printer roof The four ERCP in a row will be very close. The spool holder component must be removed to load filament.
The Enraged Rabbit Carrot Patch Buffer Array had lockers for 4x and 6x, but none for 5x, so I modified the original files and created one. A buffer for 5x filaments is perfect if you're using a Prusa MMU. For the rest of the printfiles of…
Couldn't find any mounts for the Enraged Rabbit Carrot Patches so I designed this mount to be used on RepRacks. Print two of these for each ERCP. Mount has two spots for m3x5x4 Heat sets to be able to screw the spool buffers down to the…
I want use the ERCP with 2 or 4 kg spools. So create a custom version with only two buffer wo spool holder. Category: 3D Printer Accessories
I really like the ERCP, but sometimes/often the Filament didn't go where it should and went out of the buffer. This little thingy here is to help the Filament to go where it has to go: to the Buffer. Just print the parts and attach them…
Olight ArcPro style flashlight charging station. This can be mounted on a wall, screwed to the Grid10 Base plate or there are holes on the back for two 18x3mm magnets. This is a great accessory of you want a secure mount for your Olight.
I've been on a tear lately restoring my retrocomputing stuff to good condition, and relevant to this website, making new enclosures/cases since I've also been either acquiring hardware here and there (since I sold a lot of my stuff a long…
This is a RCPROPLUS SupraX 6808 (6 mm bullet, S6 or D6) Connector Protection Cap. It's designed to be printed out of TPU, and should not need supports to print, as the overhangs are all > 40 degrees.
2 choices for mounting a variable motor on a Durst RCP20 print processor. Installation video: https://youtu.be/FUrH1isRBUM Category: Other
ERCP markers with the numbers on the opposite side.
This is a remix of the original "Low Friction Spool Holder for Enraged Rabbit Carrot Patch (ERCP)" - just 21mm shorter.
This is a RCPROPLUS SupraX 7808 (7 mm bullet, S7) Connector Protection Cap. It's designed to be printed out of TPU, and should not need supports to print, as the overhangs are all > 40 degrees.
To avoid missleading filemant i create a cover to aboid this issue. Please note: This part is designed for PLA or PETG. If you print it in ABS please scale it to your needs This Cover is not compatible with the standard ERCP (conflict…
Motor mount for use all in RC Powers park jets. https://rcpowers.com/community/
Free up space on your crowded workbench and hang up your work of art. Uses two nail to attach the mount to the wall. Has curved mounting finger to match that of the curved prop slot used in V5 RCPowers park jets, however should fit any…
This is a model of the battery cover in the HD-Radio RC-P7 remote control. Best way to print this is on its side. You will need to use supports to support the tabs that stick out. There is room for improvement as the bottom has a slight…
Resized from a D6 upload, fits firmly (printed in resin, unsure about PLA).
My ERCF v2 kit from Siboor came with a pre-soldered neopixel string for the ERCP. The carrier print didn't play well and kept breaking on me, so I designed a more ‘clip’ style to hold them. They fit pretty well and hold well, although…
