832 models
English The 3D4U Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself to the wall. For this purpose, the base plate was optimized for the…
Print approx. €6.09–€7.45 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
The Crimson Firehawk appears prominently in Star Wars: Young Jedi Adventures . This model has versions for its appearances in Season 1 and 2. On the Season 2 version, the engines can rotate, the wings can fold up and down, and the nozzles…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Step back in time with this 3D-printed inspired replica of the Venus of Dolní Věstonice , an iconic prehistoric artifact from the Paleolithic era. Standing at 11.5 cm tall , this detailed sculpture beautifully captures the essence of one…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Skadis Halter für Modelco.fr Schraubendreherset, anpassbar für andere Durchmesser. Als Haken wurden Standarthaken für das Skadispegboard verwendet. Skadis holder for Modelco.fr screwdriver set, adaptable for other diameters. Standard…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Es gibt keine Besonderheiten zu beachten beim Drucken dieses Werkzeuges. Es soll eine Möglichkeit bieten auch Sechskantschrauben mit 13mm Durchmesser zu in engen Stellen zu lösen. Als Bspl. jedes handelsübliche Waschbecken hat genau…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for one variant
There are two sizes determined by the span of the holes in the vertical profile (40mm or wider 49mm). Paper/label can be placed either paralel or perpendicular to the shelf. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D…
Print approx. €4.88–€5.96 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Drehknauf ist passend für die ARENDO Eierkochermodelle. Es scheint ein Problem bei den original Knöpfen zu geben. Sie brechen nach einiger Zeit ab.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Drehknopf für Hercules Pult in weihnachtlichen Stil. Knob for hercules controller (x-mas look)
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
This is a preheat file. It does not contain a model, it does not perform actual printing! It just heats the head to 175 celsius and the bed to 85 celsius. When it is done it beeps and keeps it warm and waits for the next print. The gcode…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for PETGSource material: PET
Distance between the bolts - 20cm. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 4 hours. Slicer settings: 0.25 mm layer height, 4 perimeters, 30-40% infill, no supports Post processing…
Print approx. €7.24–€8.85 excl. taxPreliminary estimate for PETGSource material: PET
Thank you all for the many overwhelming responses! Because I have noticed that many have additional wishes and would like to put their own spin on the design, I have decided to change the license and allow remixes. To help you get…
Say hello to this fierce little friend—T-Rex is here to stomp straight into your collection! With its chunky legs, stubby tail, and massive head full of charm, this dino is a must-have for fans of quick and cute prints. ✔ No supports…
video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…
A nice box in the shape of two cylinders twisted into each other. Ideal for packing small things. Also very suitable as a gift. I printed it with 0.3 layer height. No supports nessecary. This design is highly inspired by Defauld's Screw…
Ich musste meine losen Sechskantschraubenbits organisieren. Deshalb entwickelte ich eine Box zum Sortieren von allen Schrauberbits. Diese Schraubendreher-Bit-Box kann im Deckel 100 kurze Bits aufnehmen. Im hinteren Bereich nochmals 40…
Damit man den Drehknopf farblich hervorheben kann, hab ich einen Ring konstruiert, den man einfach über den bestehenden stülpt. Drücken kann man ihn trotzdem noch ohne Probleme.
RECENT UPDATES January 13, 2024 Licensing has been updated and opened up to BY. Moved old updates to the bottom of the description to keep intended information up top. Added a zip file (Modular Pallet Rack Base Kit Step Files (No Panels))…
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Here you can download the drill hole extractor for an AEG vacuum cleaner. This sucks itself onto the wall so that you have both hands free for drilling. The original handle can be too heavy for this, so I have added a micro handle.
This is a building I designed for a small shop+office building for my train layout. The building and windows should print fine in the orientation shown. You might need supports for the building window openings, depending on your printer.…
Requires supports. I consider this a work-in-progress, I have not printed it myself yet. I may make a 2-part version that is easier to print. #1319971112300 This person is illegally selling this on Etsy even though my design does not…
FR L'utilisation d'un rehausseur sur un laser xTool S1 vous ouvre plein de nouvelles possibilités. Cependant il n'est pas aisé d'utiliser certaines fonctions que vous offre ce laser sans devoir démonter ce rehausseur. Nous voyons ici…
Building I designed for a small non-railroad industry on my train layout. The building and windows should print fine in the orientation shown. You might need supports for the building window openings, depending on your printer. I have…
In the first decades of the 20th century, these bogies were commonly fitted to passenger rolling stock on the European main land. These "swan neck" bogies were based on an American design. It is likely they were used all over the globe,…
Schraubendreher Tischhalterung passend für eine Wera Big Box.
I built the Mini Warehouse for use with the remote controlled Mini-Skidi RC model that I remixed here: https://www.printables.com/model/567657-the-mini-skidi-rubber-remix. It became a play environment for young drivers. The warehouse was…
A custom stackable solution to store many small parts in a Harbor Freight Storehouse 20-Bin Medium Portable Parts Storage Case. There are two trays that stack together. I designed these specifically to fit in the upper left-hand corner of…
Schraubendreher Halter für 4* große Schraubendreher 10mm Schaft und 8* 8mm Schaft. Optimiert für Wera Schraubendreher. Erweiterung zu…
In Teile zerlegt, um den Druck auf fdm-Druckern zu erleichtern (STEP Datei). Die Teile müssen zusammengeklebt werden / Spitted into parts to make it easier to print on fdm printers (STEP File). Parts have to be glued together
Salut, This is a simple but effective photo support. It is compatible with photos or drawings from 10x15 to 20x30. I printed in variable height and with the new parameter in Prusaslicer "irregular surface" (thickness 0,1 - distance 0,3).…
🦖 Abstract Minimal Animals – Prehistoric Collection (Low Poly) This set includes four minimalist low-poly prehistoric creatures designed in a clean, modern geometric style: Tyrannosaurus Rex, Triceratops, Stegosaurus, and Pterodactyl. The…
I really like @WimV's Mini Warehouse design but I needed shelves every three notches and stability normally provided by horizontal crossbeams. But with the original crossbeams, you can only put shelves every four notches (because you need…
Skadis Halterung um das komplette PARKSIDE Schraubendreher-Set VDE ordentlich aufzuhängen. Support: Erforderlich für die Haken Layerhöhe: nach Wunsch Material: Nach Wunsch Infill: 20%
No entiendo como se pueden vender estas cosas, mi padre sufrio un accidente cerebro vascular hace un tiempo y al no poder comprar el modelo me hice uno propio, solo se necesita el modelo y unas cuantas banditas elasticas. el modelo es mio…
Solid shelves for @WimV's Mini Warehouse . They clip directly onto the horizontal beams (or horizontal beam/crossbeams I made). Both sizes are available (105 and 190). They are rounded at front and square at back (in order to make a…
Just a short angled fore grip which fits exactly on the picatinny rail. Have fun :) Lenght: 89,9 mm Angle: 30° Barrel cover: https://www.thingiverse.com/thing:2886730 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't…
Ein kleiner Teller auf 4 Kugellagern zum Drehen. Er kann nur manuell gedreht werden um Produkte aus mehreren Perspektiven zu fotografieren. Es werden 4 x 608ZZ Kugellager benutzt.
A non adhesive method to mount a Firehouse 2 LED strobe light to a DJI Mini 2. This mounts to the rear top by clipping on the rear vent ports in a secure fashion. Modeled against the DJI Mini 2: https://www.dji.com/mini-2 2 LED Firehouse…
I found a number of parts bins for the Harbor Freight Storehouse Parts Storage Case but I didn't like the feet and I wanted them with a label ledge and dividers. So taking inspiration from GridFinity and wanting to learn Fusion360 (trying…
I wanted a way to display my 13*9cm photographs that works well, looks cool and obstructs little of the image, so i made this. Edit: As suggested in a comment, i added a version with open sides so you can slide in bigger pictures. It…
Allgemeines Schraubendreher Griff zur Verwendung mit handelsüblichen 6,35mm 6-Kant Bithaltern Druckeinstellungen Drucker: Prusa MK3s Schichthöhe: 0,20mm Infill: 15-25% Gyroid Vertikale Perimeter: 3-4 Decke- & Boden Schichten: 3-4…
This model more closely resembles the wire decking on the racks in our warehouse. This is made to go with this model: https://www.printables.com/model/561782-mini-warehouse Don't forget to post your makes and get your prusameters! I love…
360° Drehteller, Drehständer, Drehplatform, Fotografie, manuell oder elektrisch mit Hintergrund Habe hier einen drehenden Teller für Fotografie oder 3D Scan gebaut. Der Hintergrund ist perfekt zum Fotografieren für Modelle. Passend dazu:…
D: wasserdichte Blumenvase für Rosen, Tulpen, etc. Höhe gesamt: 370 mm Lochtiefe: 170 mm Durchmesser außen: 108 mm Durchmesser innen: 93 mm !!!Keine Haltbarmacher zum Blumenwasser beimischen!!! E: waterproof flower vase for roses, tulips,…
If you have no place on your desk, place the Mini Warehouse on a shelf with hidden mounting system on a wall. The shelf contains 2 slots so the warehouse is firmly placed on the shelf. For boring holes in a wall, a drilling jig is added.…
Berehynia, a female deity from Slavic mythology, a simplified supportless model based on the monument standing on Independence Square in Kiev, the Ukrainian capital that is under siege at this very moment. This is a supportless print.…
This is my interpretation in Gauge 1 of a Minden Deutz MD41 LEICHT bogie. These bogies were used on several DB carriages like the "Silberlingen" and 4 axle "Umbauwagen". https://de.wikipedia.org/wiki/Drehgestell_Bauart_Minden-Deutz Space…
Edit 01.08.2025: Zurzeit wird ein neues Zahnrad getestet, da anscheinend das aktuelle Zahnrad mit dem Zahnriemen zu stark abnutzt und die Riemenspannung zu hoch ist! Suche hierfür auch ein paar Leute die dies für mich testen! Um eine…
EN: This is a print-in-place swivelling and rotating wall bracket compatible with the Xiaomi Aqara RTCGQ11LM motion sensor. The Xiaomi PIR attaches directly to the rotating base of this wall bracket, replacing the original battery cover.…
Der Platinenhalter / Lötständer bietet eine 360°-Drehung und eignet sich für Platinen unterschiedlicher Dicke. Er besteht aus mehreren Teilen, die zusammengebaut werden müssen. Beim 3D-Drucken muss der Druck bei einer bestimmten Bauhöhe…
In the words of Janine, WE GOT ONNNEEEEE!!!!!! Here is my design for a Ghostbusters Firehouse Birdhouse built to the Royal Society for the Protection of Birds (RSPB) specification…
A simple Screwdriver holder for a Kuepper pegboard or any other pegboard with European standard hole grid. Einfacher Schraubendreher-Halter für die Küpper Lochwand bzw. jede andere Lochwand mit Euro-Lochung.
Schraubendreher Wandhalterung mit 11 Plätzen für Schraubendreher. Es passen auch die Wera Schraubendreher mit Sechskant unterm Griff. Befestigung an der Wand mit 3x20 Schrauben Category: Tool Holders & Boxes
Building I designed for a small non-railroad industry on my train layout. The building and windows should print fine in the orientation shown. You might need supports for the building window openings, depending on your printer. You can…
This project is less refined than some. It is sort of a kit bashing project that comes completely from my brain to fill a space on my layout. It was drawn in Fusion360, but I have not included the file as it is very large and is not laid…
Stylized Deer & Doe (Male & Female) This set includes two stylized 3D models of a male deer and a female doe. The shapes are intentionally simplified and reduced , focusing on clean lines and smooth surfaces to achieve a minimalist and…
This is my interpretation in Gauge 1 of a Minden Deutz MD36 SCHWER bogie. Bogies like these were used on several series of DB carriages. https://de.wikipedia.org/wiki/Drehgestell_Bauart_Minden-Deutz Space is available to fit ball bearings…
Vorrichtung oben und unten aus PLA gedruckt Adapter M12-M6 + Achse/Axis aus 1.4301 Kugellager/Ball-Bearing : https://www.ebay.de/itm/222526238773 Schrittmotor / StepperMotor: https://www.ebay.de/itm/392557822271 Antrieb / Drive:…
Drehsitz Abdeckplatten Um nicht immer in die großen Löcher der Drehsitzplatten auf Batterien und EBL zu schauen, habe ich diese Abdeckplatten erstellt. 1 x ohne "Kühlschlitze" für den Beifahrersitzt (Batterien) und 1 x für den Fahrersitz…
nach dem Druck eine M6 Mutter eindrücken, fertig
Horse Sculpturehousewarming Geometric Wall Art
This square lens hood for the XF 27mm f/2.8 lens is designed for two-part printing. Print the threaded base and the hood separately. Screw the threaded base into the hood to your preferred depth and secure it with glue. Leave about 2mm of…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Drehtellerhalter für Anycubic Wash and Cure Plus
With this rotary stacking container you can store small things - bolts and nuts for example. If you do not need the boxes, you can store them space saving. On both narrow sides of the container you can attach a label. There are some…
Made this for fun. Should got together relatively easily, though you may need to sand or glue parts. Category: Toys & Games
The Aegis Face Shield is the best design for mass production I have found after making a ton including the super nice and study Prusa V2 and V3. Its just that I can't make enough of those. It is a 32 minute print with a 0.8 Nozzle, 0.30…
A screw sizing gauge for all standard imperial size screws (at least all the ones in the McMaster-Carr Catalog) as shown below. The sides are angled and slotted to make it very easy to align and determine the length of screws/bolts with…
This ammo storage bin is designed to fit the Harbor Freight STOREHOUSE 20-Bin Medium Portable Parts Storage Case and hold multiple calibers in one compact unit. Perfect for keeping small arms ammunition organized within your modular…
TECK 85 is a retro-style replacement shell for the TECKNET BM308 Bluetooth mouse. This project started because my own mouse came flying out of my bag, hit the floor, and managed to break the left click and both side buttons. The PCB and…
In die Fassung kommen 2x PLCC kaltweiss LEDS Das Glas drucke ich mit den Einstellungen von hier: https://www.printables.com/de/model/273948-test-model-for-transparent-petg-printing
(Please note, this project utilizes a custom baseplate and bins. "Standard" gridfinity bins will not work.) I started this project because I wanted to create custom bins for my STOREHOUSE 15 Bin Small Portable Parts Storage Case . (This…
This model is compatible with the lego system.
this is a narehate fursuit base! please use to your desire! you can use this for commissions/customs. i only ask 4 credit in some shape or form. i recommened printing this with a width of 13 inches to properly emulate the narehate head…
Drucker: MK3S+ mit MMU2 Griff wurde aus Prusament Orange PETG , stehend gedruckt. Variables Infill, bis Schichthöhe 25mm mit 90% Infill, dann 25% Infill. Schichthöhe 0,15mm. Nozzle 0,4. Keine Stützen. Stab wurde aus Prusa Galaxy Silver…
Based on Yanev's cool design, another tool box. Today for Wera screwdrivers. Velcro wrap was not really practical for me. Inlets I have 3 versions: Neodym version for Ø6x3mm magnets and two snapper versions for retaining the screwdrives,…
One piece Thousand Sunny Ship's Lion head Figurehead The front and back files are best for FDM printers, the other is best or SLA printers. Category: Sculptures
Es handelt sich hier um einen Ersatz-Drehknopf für WECK Einkochautomaten inkl. einem Positionsmarker. Der Drehknopf hat etwas Spiel, das Original wird mit einem Stahlblättchen fixiert, darum hier einfach etwas Heißkleber verwenden.…
This is a 3D model of a sitting whippet or greyhound. You will need support for parts of the belly and head/ears, but should be pretty straightforward. I had some problems with the overhangs of the ears, but I am sure that some…
Ein Riffel Dreh- und Druckknopf für ursprünglich Ender 3V2. Loch mit Durchmesser von 6mm und 10mm tiefe.
Wera 816 RA Ratchet screwdriver (Ratschenschraubendreher) Case, supports Bits from Wera BC7 BiTorsion 1 You need 8 x Neodym magnets ⦰5x4 mm
I built a holder for Wera screwdrivers for the Arebos perforated wall. The holder holds up to 6 screwdrivers and is hung in the keyhole openings in the tool wall.…
The Quadlock adapter from “rudra”, now with four holes in the AMSP pattern. The holes have a diameter of 5mm and are slightly countersunk for countersunk screws. Now you can screw this quadlock receiver to something that has…
You can transport your joints safely with the cover. The joint rolling aid is printed twice and then simply plugged together and can be transported flat and space-saving. Happy printing! If you like the thing leave a like or post a make.…
This model is compatible with the lego system.
These 1:32 scale pallets and bins were designed specifically to go with my 1:32 forklift , pallet rack, and other warehouse-style builds. The pallets are open-bottom designs (no bottom bar), making them easy to pick up, stack, and handle…
Label with Color Swatch Holder, and modified version without color swatch. Two versions, one with magnets and other with double side tape. Useful for displaying printed product label or paper labels in a store or warehouse. You can buy…
Feel free to take the file, make any changes (diameter etc.) appropriate to your tool and add fonts / logos.
A 1:12 scale model of this Masonite door: https://www.homedepot.com/p/Masonite-32-in-x-80-in-Premium-Right-Hand-Outswing-Flush-Primed-Steel-Prehung-Front-Exterior-Door-with-No-Brickmold-84192/204759988 I used 1.5mm x 8mm self-tapping…
Check out the video on the assembly here!
Quite Easy to assembly. I used a 0,4 Nozzle except for Windows where I used a 0,25 Nozzle.
My remix from the amazing Nighthawk FPV Drone.
I printed mine with 0.2mm layer height on a 0.4mm nozzle. Be mindful of the supports it's recommended but not on 100% of the lower side. I make sure there is support about every 2cm on the underside of the larger models. Dimensions are…
