P
PrintablesMazzPrint
Relay Base Holder for 70A 12V Power Relays
Relay holder for 4 or 5 pin power relays. Stackable with each other. 6.3 and 8.4 mm female faston terminals required.
- Downloads
- 205
- Likes
- 22
- Rating
- 4
Search results: relays
Counting matching models…
P
Printablesjohan v
Relay Holder for 6 12v relays
A holder for 6 relays locking in the connector in to the holder just make a bracket
- Downloads
- 152
- Likes
- 28
- Rating
- 0
P
PrintablesReeverson
DIN Rail Mount Heatserts (Buck Converters & Relays)
Remix of qwertmodo. Use heat inserts to mount differnt electronics to it.
- Downloads
- 113
- Likes
- 25
- Rating
- 0
P
PrintablesBrandon Brown
Modular Relay Mounting System For Bosch Type Relays
This is a complete relay mounting solution for the typical 5 and 4 pin Bosch type relays and sockets used in automotive, equipment, power sports and other applications and allow for a simple modular setup for as many relays as you need. I…
- Downloads
- 100
- Likes
- 15
- Rating
- 0
P
PrintablesDIY.Mushroom.Tek
3.3.1 Controller with Relays, Sensor and HMI for indoors grow tent (martha) for mushrooms (plants also possible)
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- 2024-07-18: Created an extra controller for plants/cannabis that…
- Downloads
- 90
- Likes
- 33
- Rating
- 0
P
Printableskigison
SPDT Relay Case / Enclosure for 5V/12V Relays
This is a 3D-printable enclosure designed for SPDT 5V or 12V relays. The design includes two parts: a base and a cover.
- Downloads
- 85
- Likes
- 5
- Rating
- 0
P
PrintablesEd
UK Switch Box Extender for Smart Relays
This is a simple tapered spacer that sits between the switch and the wall to give you extra space in your back box. When installing some smart relays I found that my back box was too shallow. Taking out the back box and fitting a new one…
- Downloads
- 64
- Likes
- 7
- Rating
- 0
P
PrintablesRobin
Box for AZ-Delivery 2Relays-Module
This is a box to fit the 2Relays-Module from AZ-Delivery (I use this to switch lights and cooling fan of my LACK enclosure V2 via OctoPrint enclosure plugin). No screws needed, just press the module down firmly onto the cone shaped pins.…
- Downloads
- 52
- Likes
- 4
- Rating
- 0
P
Printablesdocmech
Relay-phant, mounting rail housings for various relays
I bought some of the relays below and created some housings to get them on a 35mm rail. I drilled out the holes for LEDs to 2 mm and glued in a clear piece of PETG as lightpipe. The timer relay can be set as single timer. In this case…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
Printables3D_Project3R
Open Sprinkler/Raspberry Pi 4B 7 Inch Touch Screen Enclosure/16 Relays
This enclosure was designed as an Opensprinkler control box running on a Raspberry Pi4 with a 16 channel relay board and 7 inch touchscreen but can also be used as a general purpose Pi4 enclosure. The enclosure lid is hinged and has snap…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
PrintablesMF Meccatronica
Step Relays
Simple step relays made with limit switches and common DC motors. One version for limit switches with typical contacts up to 10A and a smaller version with typical contacts up to 3A. Both designs are available in versions with one or two…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesSBP
2 relays casing
Printed in PLA, you'll need one screw for each relay and 1x 30 mm wood screw to assemble the 2 parts and to fix the box on the surface.
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesVáclav Šubert
Adapter for E12 Fuse box to fit late E24/E28 Relays
Adapter for E12 Fuse box to fit late E24/E28 Relays. Not sure if there are some other versions, but this fits the Motronic 1.3 Relays and 1979 E24 Fuse Box.
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
A holder to hold tubes of relays
easy for producing where you need to place a ton of relays, these auto restock
P
Printables
Raspberry Pi 3B Case + Relays, Step Down and Buttons
4CH Relay Module: https://www.aliexpress.com/item/32649659086.html Step Down: https://s.click.aliexpress.com/e/\_9j4BaH Print Settings Printer: - Rafts: No Supports: No Resolution: 200 Infill: - Filament: - - - Category: 3D Printing
P
Printables
Advanced PSU Control Box for Prusa LACK Enclosure (Relays + LED + 5V Power)
This is a custom-designed PSU and Control housing for the Prusa LACK Enclosure. I designed this to centralize all power management, handling the printer shutdown logic and lighting while providing clean 5V power to an external Raspberry…
P
Printables
A holder to hold tubes of relays
easy for producing where you need to place a ton of relays, these auto restock
P
Printables
2 relays box
This is a relay box for a two relays board commonly found on Amazon / eBay. Connect to your OctoPi to turn on and off your printer. You can see on the photo how I connected it in parallel of the original switch of my Flashforge Creator…
P
Printables
Box for three relays Fotek SSR-25 DA
Box for three relays SSR-25 DA. Screwhole is M2 and M3 with 90-degree flathead. Print instructions Category: Electronics Summary Box for three relays SSR-25 DA. Screwhole is M2 and M3 with 90-degree flathead. Print Settings Printer Brand:…