Counting matching models…
:IMPORTANT THREAD / BOLT INFO: I had to scale the clamp bolts up in size about 1-2% and the bolts for the base about 3-5%. That's what worked for me and FOR MY LIKING - everybody's setup is different, your mileage will vary, everything…
EccentricToast's model is amazing, but it didn't have enough sections, so I simply added a divider down the middle. I also included the original .3mf's for convenience, and both a .3mf and a .stl for the bottom. Blank top with no logo…
Monsters Inc Scream Canister with text. Top, middle, bottom - 0.3 Black ring, spigot - 0.2 Text, accents and gauge items- 0.16 Remixed model to include a magnetic removeable lid, gauge surround and text, make sure you download the correct…
Sunlu Filadryer Filament Guide to aid smooth movement of filament when the dryer is placed above the printer i.e. on top of an enclosure. Youtube Video Here https://youtu.be/jmD6SlTSWTo Print the threaded part with the thread face on the…
cheap lens: https://www.zennioptical.com/p/stainless-steel-round-eyeglass-frames-/5500?skuId=550021 Mark the top of the lens before removing it from the frame (CYL). If necessary, secure with instant adhesive against rotation. The glasses…
There's a few included files to let you print how you want to. The fenders should just snap on, although you can glue them to make them permanent. I used an M2 screw as the axle for the wheels, it needs to be at least 10mm long if memory…
Reupload from makerworld
Refer to original model for printing recommendations, installation procedure, and version selection. I used Avery Mini Business Cards - 1 "x 3" 5329 (https://a.co/d/acuTRJT)
Looking online I found lots of Gloomhaven walls with removeable doors, but none for Frosthaven that model the “snow door” concept. I print this in white PLA with a 0.12mm layer height, 10% infill. Support should not be necessary. Both…
Remix of: https://www.thingiverse.com/thing:2808264
Introducing the Ash Catcher, the ultimate solution for easy ash disposal after smoking. This ash catcher features a convenient unscrewable compartment, making cleaning quick and effortless. Its minimalist design makes it a stylish…
SOVOL ZERO MOD 270° Hinge, easily removeable, no additional screws or supports required. Feedback would be appreciated. WHAT IS IT? I think ALL printers should have 270 degree hinges. Especially those with glass doors. If it isn't against…
this is Mk2 of my ash catcher design, now there's a 90degree & 45Degree models with 3 Different sizes for the ash compartment.
This is a modified design from original Flashforge Waste-Container for the insite back-position. Flashforge move the purge-waste to the inner backward position, here the modified Waste-Container, but with removeable Cover/Door. With it…
Box exterior itself is approx 60mm x 60mm x 50mm without lid (approx 70 with lid) The bow and decoration are separate files just in case you only want the box. I deliberately made the lid not flush fitting to make it easier to open. All…
top mounted filament holder for flash forge AD5m PRO mounts to front right corner with lid down. Lay on side with flat bottom of roller use supports and paint in to the hexagons as well to the flat spot on the roller
I've having a hard time breaking free the removable command strip mounts from @Marcus_543412 (Can't break free at all even after completely destroying it). But I really need this design as it become impossible to remove the command strip…
I really liked this spoon holder but found it a bit slippery on the worktop. I wanted to put self adhesive feet on it but realised that would cause an issue with washing it, so I made a tray to fit in the bed which could be removed for…
I have made yet another remix for the command strip + locking snap mount. This time for large 3M command strip. I have re-made this model from scratch using the original locking snap in the open-grid models. The large command strip is…
Printing : Print 1x main body and left/right side. Print 2x side clip for each additional layer. Print 4x strap per layer (works for me) No supports. .2mm layer height Quality defaults How to use Determine how many levels you will need by…
Customize it with openSCAD. Experimented with the awesome openSCAD lib Round-Anything from Kurt Hutten. Print it face down with manual color change.
removable e track end cap, locks in place with tab that can be pushed down to remove print in petg for flexibility
A Keychain with a Rick Roll spotify code, and a shopping cart token, which you can remove out of the cart. Print in 0.2mm height, and keep in mind, that you have to change the color mid print, so your code will be scannable. With 0.2mm…
This fusion file lets you design your gate just how you want it for the Removable-Gate-GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models,…
JUST A THOUGHT I HAD ABOUT HAVING TO HAVE A POUND COIN OR A CHARITY TOKEN EVERY TIME I WENT TO THE SUPERMARKET. NOW I DON'T, I HAVE THIS ON MY KEY RING & WHEN I'VE GOT THE TROLLEY I JUST TURN IT SLIGHTLY LEFT OR RIGHT & OUT IT COMES, THEN…
Simple spool holder. Works great.
Intro: This is a large capacity bird feeder. It is modeled after a popular wooden one that has an interior chamber for seeds and baskets for suet. Magnets are currently required if using the suet baskets. Magnets are optional for the…
Thanks to the Fairphone 3 Dummy of @Tig3rch3n I've made a bike mount. The upper part is removeable so maybe someone could adjust the clamp for other bikes or create a car mount or a desk stand. The lower part is fixable with cable ties,…
Simple print to replace outdoor faucet tap handle. Fits square male end 8 x 8mm with 0.6mm tolerance added. Scale x/y to make the square smaller or bigger for your tap. Print Settings Setting Walls 4 Layer Height 0.2mm Nozzle 0.4mm…
Because of the strong winds during winter here, the cold air gets pushed to the inside of the QIDI Q1 Pro enclosure if I have the exhaust system (by Igor R.) attached. Since his duct adapter is removeable, I added this back cover port…
I made this for my CR6-SE so I could put all the skirts, purge lines and filament scraps in - so I don't have to go to a bin every time. The base slides into the 2 slots in the 40mm x 40mm extrusion on the base of the printer. 10 holes (5…
Removed the logo from the v2 bottom bracket.
This is an easily removeable purge box with a side mounted handle. Designed for use in tight spaces, and to avoid the issue with purge chute clogs. Standoffs on the box keep it clear of fans and airflow in the back, while the large handle…
Abracadabra! Alacazam! You'll print this model! Bam!
This is a simple circle planter that has a built-in water tray in case of overwatering. Customizing Instructions: I designed this planter to be customized, using Tinkercad. Below is a detailed guide to adding text if you don't know how…
Something my wife asked me to make 8)
Some removeable Containers for the Hsw. More are following.
The Yellow Jaw in the pictures is the Stock Jaw… The Green Jaw is the Printed replacement.
This is an excuse for me to mess around. This is my 4th design… ever. I know I have a lot to learn. Got a printer in December '23 and have been mostly printing STL's. Upgraded printers and started designing during April '24. Parts…
I hate having doors open and in the way, this mod adds lower hinges that unlatch allowing doors to be removed. when installed simply lift the pin to remove the door!!! Print 1 hinge, 1 mirror of the hinge, and 2 pins. You will need 4 3mm…
Made this out of TPU so I didn't have to order a new mouthpiece. Fits perfectly and snug without any magnets. Printed with about 65% infill and 4-5 wall loops for rigidity.
prints under 4 min. you can use PLA, PETG, ASA
Printsettings: Nozzle 0,4 No raft no support 100% infill 0,2mm First layer height 0,1mm layer height ironing - off Change Color: First change color: 1.90 cm (Layer 18) Second change color: 2.30 cm (Layer 22)
made originally for my boat but with works almost everywhere!
It's an Adaptor for this A-Pillar-Mount: https://www.twizy-forum.de/3d-druck/82990-3d-druck-universal-halter-fuer-die-a-saeule?start=150#168884 I use it, to mount the display of the dashcam in my Twizy. TinkerCAD-Link:…
This is a toothbrush holder that mounts to a wall or other surface.. It is removeable from its base so it can be cleaned.
Thermostat compartment which can be easiyl attached to a holder bracket. The foot can be moneted upside and downside The socket is designed for 2 screws 3x25mm Thermostat/ Hygro:…
During my V-Core builds I managed a couple of times to insert magnets in wrong orientation so magnets from panel and frame don't match. I designed a small pocket so you can pull it out with small screwdriver and insert back in correct…
Printquality dosn't really matter, stronger with thiner layer height.
If you need to vary the size of the removable cups, you can print them out yourself. In the files you will find 3 different sizes. For each size there are variants of the division (horizontally or lengthwise, as well as halved or…
I made these for my magnets. Problems, yes, try to remove one tray and adjacent magnets want to come with it. The opening on the bottom helps to push the tray up by finger. This helps to better control the magnets with the other hand.…
Printsettings: Nozzle 0,4 No raft no support 100% infill 0,2mm First layer height 0,1mm layer height ironing - off Change color 2.00 cm (Layer 19)
Discover my innovative shopping trolley chip! This smart chip unlocks your trolley effortlessly and can be removed immediately after use. Practical and reusable, it significantly improves your shopping experience. Get this chip now and…
I re-designed this table in FreeCAD to have removable legs. This way you can print them separately with orientation and material optimized for strength. You can also replace one if it breaks. I also tapered the groves in the table top to…
This is a removeable wall shelf with no visible screws, You can Slide the entire shelf and remove it if not needed. only the attachments will be stuck on the wall which don't look so bad. (Working something else to attach to those) Use 4x…
Designed for the PVC base on the Uncommon Telescoping Flagpole: https://www.uncommonflagpoles.com/flagpoles/the-original-telescoping-flagpole/ Designed to be printed upside-down without needing supports. I recommend printing in PTEG or…
With this Container you can remove the silica gel very easy to dry it. You just need 2xM3 bolts that screw directly into the plastic. The length should be anywhere between 5 and 30mm i recommend 8mm.
Initially, I just wanted to upgrade my 40mm Fan + Fang Combo but it grew into a whole new X Carriage system for the FLSUN I3 Original. Hope you find it useful. You'll need to use supports and I recommend printing with PETG. Requirements…
The official assembly instructions make you solder the battery directly to the PCB. This wasn't ideal in my opinion so I designed a little thingamajig that lets you connect the battery via the original terminals. It also has the upside…
I printed it in PETG-Lite and mounted it with Tesa Powerstripts. Provided models are for Elmex toothpaste (29mm for kids and adults toothpaste) and 60 and 70 mm diameter cups. Customizeable due to openscad. This one is "quick&dirty" so…
I wanted to have more dice types to fit in the trays, so I made it with hexagons
Uploading this at night but will have more pictures for it in the morning
This is a simple bracket designed to be removeable that has a working load of 20+lbs. I made this to use with another project i am working on and in testing it i found it to be quite strong so i figured i would upload it in hopes someone…
This sleeve was designed to fit 2- 80mm x 40mm x 15mm mini HEPA filters . The circular output is currently designed to go around a 120mm input. If needed a can adjust the output to fit any size. Model must use supports in the position…
Great for salt and pepper shakers that leak their contents! Traps salt inside so you can easily get rid of! Thanks >;)
It's an Adaptor for this A-Pillar-Mount: https://www.twizy-forum.de/3d-druck/82990-3d-druck-universal-halter-fuer-die-a-saeule?start=150#168884 I use it, to mount the display of the dashcam in my Twizy. TinkerCAD-Link:…
With this Container you can remove the silica gel very easy to dry it. You just need 2xM3 bolts that screw directly into the plastic. The length should be anywhere between 5 and 30mm i recommend 8mm.
So that I can replace the plain bearings of the hot bed more quickly, I only remove the front roller deflection. This means I can quickly remove the heated bed with the rods and get to the underside of the heated bed. Maintenance is…
