9 models
Update at 2021-07-04: I added the new mounting option "X-Axis_Upper_Mounting.stl" for everything that goes to the X-Axis. For a long time I used this mount next to the Z spindle by snifflezz which was really nice. Today I remixed it…
Print in something that can take heat (i printed in ASA) Bolt should be 16mm wide head hex with m10 thread secured on the backside with a bolt. Update: added a “maintenance friendly” version where the hose more or less lays in, rather…
I bought the reRouter CM4 from Seeed Studio, but the case was out of stock, so I designed my own. This particular board can get pretty hot, so I added a 30mm fan slot to the side of the case and some holes close to where the CM4 should…
WARNING: this mod requires cutting wires and reconnecting them. Do it at your own risk. To be able to quickly and easily change whole hotends (nozzle+block+heater+thermistor), one would need to remove the “loveboard cover”, then fiddle…
A 10-inch Rack Mount for the Seeed Studio reRouter carrier board for the Raspberry Pi Compute Module 4 (CM4). You can optionally mount up to two SSDs to it. This particular board can get pretty hot, so I added a heatsink and some holes…
The best cable chain is no cable chain. Join your X motor wiring directly into the main wire loom by rerouting the X motor cable through the Z axis. The Reroute Clip holds the x motor wires safely away from moving parts under the X axis.…
After getting a dual-spool dryer i ran into an issue when trying to route one of the spools from the dryer to Tool 4 of the 5 tool Prusa XL. This attachment allows to install two bowden tubes below the base of the Prusa XL which allows to…
Early-revision MINIs in enclosures ran into heatbed thermistor failures with stock cable routing. Created a short tube with a 90-degree bend, and a ring to keep it closed and the cable contained. Modified the top & bottom heatbed covers…
This mod requires some other way to mount electronics! i recommend the electronics tower, and optional mod i made for it to mount the skr if you dont have a Xbuddy case https://www.printables.com/model/1415732-prusawire-electronics-tower…
