Counting matching models…
A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP. It has access to all the ports on the side and bottom of the device. It can be printed with…
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I…
A simple stand for the Anbernic SP
There are two files, a version that is .8mm thick and a version that is .6mm thick. The .8mm version is almost silent, but the buttons are a little stiff. The .6mm version has a soft audible click, but the buttons feel a bit better to…
DISCLAIMER: Modding your electronic devices can be dangerous, and you may end up damaging them. Use at your own risk. The author of this publication is not responsible for any damage caused as a result of using these models. Protection…
Charging dock for the RG35XXSP. Made a bunch of these for the kids in my life this year. Print the front and back in PLA or PETG, and the feet in TPU. Assembles with QTY m4 screws for the feet and snap-together front and back halves that…
Rework off Tomunderwood's Gameboy Advance SP Rugged Case to suit the Anbernic RG35XXSP
I found that both the 0.8mm and 0.6mm variants of @8BitDrip_2287972 's RG35XXSP Membrane Inserts were too thick, so I used Blender to make an even thinner 0.4mm variant. I find this thinner variant works very well in my RG35XXSP and feels…
-------------------10/07/24------------- IT HAS BEEN DONE! I figured out the sticking and I think I make it a little better than the first round with the L2/R2 buttons. Check out the V2 of those and let me know if you see anything that…
A little desk holder for an Anbernic rg35xxsp. Print in place.
Designed after the work of IamDroBro (and mb also Emotional-Priority49) on Reddit for the RG35xxsp. This dock suits the RG35xxsp - check your model no. Hardware required: 4x M3x8-12mm countersunk bolts 4x 4.5mm(w) x 5mm(d) M3 threaded…
Nothing special but displays the SP in your collection.
The model was based on https://www.printables.com/model/1152772-honeycomb-storage-wall-anbernic-rg35xxsp-mount. Thanks to the author @SamuraiLink3. Print settings Support: Yes Filaments: PLA, PETG Fill: 15-20%. Perimeters: 3
I modeled out a 3D-Printable insert for the Anbernic RG35XXSP based on the dimensions circulated online. A combination of Multi-Material Printing and patterned build plate allowed me to produce a pretty nice design to put in my handheld.…
Printer : Modified Ender 3 V2 with Direct Drive Material : ESun PETG Black Nozzle : 0.4mm Layer Height : 0.2 Wall Count : 2 Infill Pattern : Gyroid Infill : 40% I wanted to get a compact case that protect much of the body from scratches,…
This is a custom-designed mount for the Anbernic RG35XXSP handheld console, specifically made to fit the IKEA Skadis pegboard system. It’s the perfect way to display your device and keep it safe when you aren't playing. Features: Perfect…
A magnetically-locking hip-mounted belt holder for the Anbernic RG35XXSP retro handheld. It uses a single paper clip for the top cover hinge and magnets on the side to keep the lid in place. There are two options for the type of magnets…
This is a Honeycomb Storage Wall mount for the Anbernic RG35XXSP. There's not much to say about this one, its a simple box that can attach to HSW inserts and holds your handheld securely. Print Settings Support: None Filament: (almost)…
SD card holder for the Anbernic RG35XXSP. Replaces the existing battery cover. VERSION 2.0
RG35XX SP Battery Cover replacement using original dimensions and fits snugly.
I made a comfort grip for the Anbernic RG35XXSP, as it needs a bit more size for bigger hands. Printed in PETG at 0.2 mm, with support's
Some minimalist grips for the Anbernic SP (RG35XXSP). Gives your ring finger and pinky something to hold on to, without adding much size to the profile of the console. Still very pocketable. Should be just a friction-fit with the screw…
See new model below that solves the issue of the slot wearing out over time allowing SD Cards to fall out. Improved updated version: https://www.printables.com/model/1194804-anbernic-rg35xxsp-sd-card-holder-rev20
This is a very simple shell made to hold ryandam's Teensy 4.1 Sleeve Case on the back of the RG35XXSP lid and allow rotation of the Teensy while opening/closing.This is significant when using a short 6" cable like I am. Video…
Generated a 3x1 solid bin using https://gridfinity.perplexinglabs.com/ then made it fit the RG35XXSP. Cut the left side so it's only using as much as needed. Added logos and names but blank provided as well.
A replacement Battery Cover / Door for your Anbernic RG35XX SP that adds a Mechanism Mounting Point. Simply unscrew your old battery cover, and screw this one in. Yes, it's a bit silly, but it may come in handy ;)
A replacement Battery Cover / Door for your Anbernic RG35XX SP that safely holds an extra Micro SD Card out of the way of your fingers.
Remix of the original charging dock by m00nd0gg. Removed original logo and added the Anbernic logo compatible with MMU.
A remix of an existing IKEA Skadis holder for the RG35XX SP that allows you to easily pull it out.
A replacement Battery Cover / Door for your Anbernic RG35XX SP that adds a Mechanism Mounting Point. Simply unscrew your old battery cover, and screw this one in. Yes, it's a bit silly, but it may come in handy ;)
This is a set of comfort grips for the Anbernic RG35XXSP. Fit to slide and lock onto the SP. Still allows for the lid to close, and access to all buttons and ports This purchase includes both a SOLID and AERATED version. The solid is a…
