Counting matching models…
For better audio quality, I purchased a Rhode VideoMic for my GoPro Hero 10 Media Mod. The audio is definitely better, but the microphone is always in the picture due to the wide angle of the GoPro. I found the design of @flazer where he…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
This a model for the state flag of Rhode Island. No filament switcher is required for this model. Using manual layer change switching start with White, switch to Yellow at layer 16 then Blue at 19 (for 0.2mm layer height). See the…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
At 100% resolution (Layer height 0.2) the color changes are: Layer 0: Blue Layer 5: White Layer 9: Red Layer 12:Black
Some time ago, I noticed that the remains of last year's rhododendron flowers are looking quite strange through a macro lens. That is what this plant is based on. I proudly present to you: The Rhododendron Nostril Plant These are big…
This is a variation of The Rhododendron Nostril Plant which I published before this one. It features some flower-like thingies instead of the thorns. I guess, it really depends on the paint job if this one is dangerous, beautiful - or…
Rhode Island, USA (RI) Topographic Relief Map with Rivers and Coastal Waters Rhode Island, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
Modeled after a 1977 Rhodes Mark 1 Stage 73 Piano hammer. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Infill: 100 Category: Music
There was 7 wonder in the ancient world. One of them is the Colossus of Rhodes. It stood in the city, and build for the sungood, Apollo, after the failed siege of Demetrios Poliekretes. This is a modern reproduction of it, made for…
I designed these Cauls in Fusion 360 when restoring my Rhodes MK1 Piano earlier this year. I took inspiration from here and several other forums & YT-Videos. See the plugs in action on Youtube in this playlist, where i collected some…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
From German Sci-Fi Novel Series Perry Rhodan a Space Jet made two Versions of the Top, one Solid and one for a visible
This is a replica Rhodesian A76 radio. This was created for the purpose of reenacting various conflicts and historic displays at events. The knobs are slightly undersized so they can fit into the "Top" plate and spin or be glued in place.…
check the original model for print directions. I'm gonna be honest, I'm too lazy to copy and paste them. It's also so you can give his model views aswell
Dies ist ein einfacher Standfuß für Raumschiff SOL aus Perry Rhodan. Das Modell ist von Revell und hat die Nummer 04851. Als Schrauben habe ich M3 x 40 mm verwendet. Es ist ein bisschen tricky die Länge der Schrauben richtig einzustellen,…
Rhodéský ridgeback
A very basic model--the bushing that separates the damper rail from the action rail in a Rhodes piano. These should be printed in a high strength material that has self-lubricating properties such as PA or POM. It is possible to use PETG…
These are basic thread boards holders, of various sizes, suitable for Duncan Rhodes Paint Academy paints. These paint bottles are 24mm in diameter, so anything around there would fit. I've also made a similar set for the Citadel range of…
Eine Büste von Perry Rhodan. Eventuell muss sie im Slicer vergrößert und am besten noch mit dem Hals zum Boden gedreht werden
I was fixing up a ‘72 Fender Rhodes that was missing the cheek blocks, so I designed this model from scratch instead of buying reproduction blocks. I secured each block with a wood screw into the existing hole on the frame, and then…
Howdy. Was working on making a dummy/clone Rhodie 6k suppressor and ended up making something a little more. Three versions are baffled. Three versions are solid and can be printed in whatever infill you want. Included thread pitches are…
I found models of a few other Rhodes logos, but not the rear name plate. Mine was broken in half and mostly missing, so modeled up this replica. It's not perfect, the original has more of tapered edge from the text down to the base, while…
Replacement for Rhode Video Microphone Pro flash/tripod mount. Made this as the thin brittle metal mount on the Rhode VideoMic Pro breaks easily. This is probably by design to prevent damage to the mic or camera but annoying nevertheless.…
Printed with a fuzzy external skin (smooth internal walls) out of PETG for that sweet, shiny, imperfect finish. Printed with a 0.6mm nozzle. PETG 235 nozzle, 65 bed. On PrusaSlicer, add a box modifier to cover all but the outermost walls,…
Es gibt ein Modell des Hammerkörpers für Fender Rhodes. Dem fehlt aber das Gegenlager, das Kniegelenk, mit dem der Hammer am Holzrahmen befestigt wird. Aus PLA (Thermoplastisches Druckermaterial) hat das Modell genügend Elastizität, um…
Make sure to use a strength preset for this tool. 0.4 works fine. This tool alone can rotate the pins if they are loose enough, otherwise, use it in combination with the pin wrench.
No supports needed. 2x2 Gridfinity Tiles. Video about cool Gridfinity drawer solution on my channel: https://www.youtube.com/@luisengineering
Make sure to print the pickup up, a bit of support is needed. 0.2 nozzle is recommended but 0.4 works too. I don't recommend PLA as it gets brittle over time.
So while procrastinating with a project on how to better store pencils i came to the realization that a baseplate would be a quick and easy project to do instead. The two sides shouldn't be occupied when closing the pencil case as the…
A simple Rhodia N11 pad holder. This is the updated version to allow less wiggle room for the pads.
This version is of two halves, which can be glued together after fitting. Use a spiral drill to widen the hole if necessary.
Fourth iteration of my attempt to print a replacement rubber part that fits easily into the original metal. 100% better than the 50 year old brittle dried up rubber. :-) “original replacement” was in my opinion a ridiculously expensive…
Hello, this is the first part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size); and you can use…
My beat up old suitcase was missing both of these cups on top of the suitcase, it made aligning the piano on top a bit more difficult and the sustain pedal wasn't always aligned. One of my holes was deeper than the other, but the bumper…
This bushing sits in the hole on the bottom of the suitcase piano, this is different than the one found on the stage piano. I'm honestly not positive it's the perfect design as I never had my original, I worry the sustain block might get…
I wanted to adapt the wind upgrade kit by Elektroarzt to fit my 3x3m Schneider Rhodos Twist umbrella. The pole and arms are much stronger so I ended up designing the parts from scratch. As I copied the idea I still post it as a remix. The…
This bushing sits on the top of the suitcase speaker box around the push rod that connects to the pedal itself. Mine worked fine without it, but is definitely a bit smoother with slightly quieter action with this installed.
The official coaster and logo of RIBTC, Rhode Island Bitcoiners! We are small but mighty
Helios standing over the harbour of Rhodes, printed as one solid piece. The pedestal is laid up in stone courses with mooring blocks at the corners. Bare legs show below a fluted chiton, the torso is modelled, and the bearded head wears a…
check the original model for print directions. I'm gonna be honest, I'm too lazy to copy and paste them. It's also so you can give his model views aswell
Hello, this is the first part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 160*200 mm before slicing (i did it so, to make all print at the same size); and you can use…
This is a variation of The Rhododendron Nostril Plant which I published before this one. It features some flower-like thingies instead of the thorns. I guess, it really depends on the paint job if this one is dangerous, beautiful - or…
3D printable topographic miniature of Rhodes - 🇬🇷 Greece Capture the beauty of Rhodes 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 36.449, 28.226 (LatLng) . It…
3D printable topographic miniature of Rhodes - 🇬🇷 Greece Capture the beauty of Rhodes 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 36.446, 28.226 (LatLng) . It…
