24 models
CoreXY Conversion for RigidBot 3D Printer If you still have a RigidBot 3D Printer (first of all… WHY??) here is a great way to modernize it a bit by converting it to CoreXY. Many of Luke's parts have been converted to use M3 heat inserts…
This is a remix of the Rigidbot enclosure by xzivr, its recommended you go over the instructions there as well. The main difference is that I used 3mm laser cut perspex.| Also using this thing removes the need for a rod:…
https://github.com/92sho16/RigidCORE This is a minor remix of Jordan's work (https://www.printables.com/model/983693-corexy-conversion-for-rigidbot-3d-printer-core-xy). I wanted to use a more commonly used x carriage so I remixed the y…
A clip that fits on the RigidBot frame and holds one wire with some wiggle room. Edit: Fixed the scaling. Should be good now. Instructions Sliced with Cura .2mm layer height 80mm/s with 10% infill with PLA, although anything should work.…
RigidBot Extruder to Orbiter V2.0 or GALILEO 2 adapter Allows mounting a RigidBot Neema 17 extruder to Orbiter V2 or Galileo 2 mounting holes. This may be something that only I have use for, but just in case someone else has one of these…
Update: Moved to a silicon heated bed, the cable is thinker, so I made a new version. Link to the g+ scilicon heated bed thread: https://plus.google.com/u/0/106396952736686264416/posts/gvsPgvvky5B?cfem=1 google plus died, updated link to…
RigidBot Filament Sensor Mount This model mounts a cheap Aliexpress filament sensor like this on the RigidBot frame. This is a part of my RigidBot CoreXY conversion as well, but I thought it could be useful by itself in case you want to…
I wanted a mount for my E3D on my RigidBot that works with Laser Weld Design's fully constrained block. I liked Walter's idea (and used it as major inspiration) but I wanted a few features his didn't have. I didn't want to give up any…
There are a few other ones on here for the rigidbot but I wanted to tweak them a little. I liked the one that went into the corner peices. The mod I did was to create a lip on the bottom to help keep the pads centered. Additionally…
I really loved the design of the Time-lapse Harness for the Ultimaker, so I decided to go and model my own mount in OpenSCAD. Should be quite stable, though it is too big to fit in between the two knuckles in the bottom corners, and it's…
A mount for a RaspberryPi Cam NoIR with IR-LEDs from Ebay , designed to fit a Rigidbot, that will follow the X-carriage up and down while printing. The arm is hollow to allow for the video-cable and LED power-cable to go through it and…
Use this with sactocal's lossless e3d setups -- it replaces the forward left stand, and provides enough clearance that the cooling fan won't drag on the bed (unless your printer is globbing badly). Print Settings Printer: Rigidbot Rafts:…
Work in progress Category: 3D Printer Extruders
Easily change spools by just lifting one end of the bar. This works with either an 8mm rod (like the one that comes with the stock spool holder) or a length of 1/2 inch pvc pipe as the spindle. Fits on top of the .75" square tube uprights…
https://github.com/92sho16/RigidCORE This is a minor remix of Jordan's work (https://www.printables.com/model/983693-corexy-conversion-for-rigidbot-3d-printer-core-xy). I wanted to use a more commonly used x carriage so I remixed the y…
CoreXY Conversion for RigidBot 3D Printer If you still have a RigidBot 3D Printer (first of all… WHY??) here is a great way to modernize it a bit by converting it to CoreXY. Many of Luke's parts have been converted to use M3 heat inserts…
This corner glues to a sheet of Borosilicate glass (from McMaster in my case) and makes the bed removable but still held down to the bed. To print you'll need 4 of them - Mirror two of them and test fit. They're not symmetrical. CA glue…
A part fan mount for a RigidBot single extruder (might work on a double). I like it because it keeps the fan out of the way. The bracket leaves just enough room to hit the tension lever with a screwdriver and it screws down using the two…
This is a merge of Bowden extruder mount for RigidBot and Rigidbot spool holderm adapted for mounting on back ( http://www.thingiverse.com/thing:1306535 ). Since I have an enclosure for the rigidbot I have no space on the frame to…
Created a basic rigidbot motherboard case. I used spacers to elevate the board and drilled some holes for airflow. Plenty of room to add fan. Also the extension under the cables allows to attach cable supports since the cables…
The original STL was too thick and didn't allow the H2 to reach the bed. Iterating on a few designs here.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jh8Xc4ZOjja Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/3hakIBc3CoG Category: 3D Printing
A small part used together with a nut and bolt to get an adjustable spring tension on the stock Rigidbot extruder. Details Take apart the extruder and start by drilling a small (ca 1 mm) guide hole in the center of the cross holding the…
