Counting matching models…
This is the second 3D-printed enclsoure, featuring a wide base and a gently slanted backrest for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It combines a…
Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…
This is the first 3D-printed enclsoure featuring a triangular prism-like shape rear support for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It combines a…
This is the upgraded 3D-printed enclsoure featuring a triangular prism-like shape rear support with margin for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It…
This wall mount is designed specifically for the TRMNL 7.5” (OG) DIY Kit. It allows you to securely mount your TRMNL device to a wall for a cleaner and more permanent installation. The mount consists of two printed parts, which are…
This is the my 3D-printed enclosure for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL. It requires no adhesive or screws as it is designed to be press-fit together. All buttons are usable with the case and…
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…
TRMNL OG Kit Base (Seeed Studio) This is a custom base designed for the TRMNL OG 7.5" DIY Kit from Seeed Studio . The base is made of two simple, easy-to-print parts and requires no supports . The design focuses on clean assembly and…
I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…
Easily attached to the wall with 3M Command Strips. Try painting on organic supports for the “hook”. It is designed with enough tolerance to make it easy to take off and on but provides more support than just a single hook.
Design Goals Flexible Use the TRMNL button while mounted! Supports both magnets and command strips Free parameterized Fusion360 model Sturdy and Stable Solid contact with both TRMNL and mounting surface Locks into TRMNL hanging hole…
TRMNL Desktop Stand – Waveshare 7.5" E-Paper Display This TRMNL desktop stand is a sleek, low-profile enclosure designed to display a Waveshare 7.5" e-paper screen at a comfortable viewing angle. It securely houses the Waveshare e-paper…
Remix of the enclosure for the 7.5 inch TRMNL epaper kit.
All of the purely 3D printed options for frames for the Seeed Studio TRMNL kit were, in my opinion, ugly and/or hard to print. After trying a couple of those, being dissatisfied with them, and with aesthetics in mind, which is really half…
What you need The TRMNL device , obviously 4 times 10 x 2 mm neodymium magnets (e.g. these ) Optionally, ≤ 60 mm of thin steel wire Printing & assembly Print the plate . A .15 mm layer height is recommended, so that you get 2 layers below…
A rather sturdy and secure magnet fridge mount for the original TRMNL eInk Display. I was looking for something a little beefier than the original TRMNL fridge mount (found in their GitHub) which I found to be a little too flexy for my…
A cover to change the color of your TRMNL without having to remove it from the case. You can add custom text in your slicer. I used OrcaSlicer Text Tool, font Helvetica Neue, 70% height
This is a custom-designed enclosure for the TRMNL 7.5" (OG) ePaper Display DIY Kit by Seeed Studio . I created this model because I couldn’t find an existing case that met my expectations in terms of design, proportions, and simplicity.…
Enhance your TRMNL experience with these custom-designed mounts/stands, perfect for showcasing the sleek and minimalist E-Ink dashboard. These stands are tailored to accommodate two configurations: one for the Raspberry Pi Zero W and…
Stillness insert A remix of the Waveshare 7.5 e-ink display insert for Ikea Rodalm Frame that can hold the TRMNL 7.5" (OG) DIY Kit , using a slightly modified base plate from the Triangular Prism 3D Enclosure . Made for my project…
This is a faux nail head that supports 3m command strip for hanging a TRMNL device on the wall (see https://usetrmnl.com). The triangle nail head matches the triangular hole in the back of the TRMNL for easier alignment. The tolerances…
Lis na krmné koule, press for feeding Press for fish feeding, rybářská pomůcka pro lisování koulí krmiva na zakrmování při rybaření fishing tool for pressing balls of feed for feeding when fishing
All other models I found made the TRMNL stick out too much or used magnets that I didn't have on hand. This one uses 6x2mm magnets (stacked twice) and has a thickness of a just a few layers. The model attaches to the TRMNL with double…
This is an E-Ink display running on ESPHome firmware, designed to display information from your Inker server and managed by Home Assistant . The project was not created by the ESPHome or TRMNL team and is not affiliated with them.…
plant cup to be able to germinat veg seeds be for the growing season also can be use with flower seeds as well
This modified backplate is designed to improve usability and everyday handling of the TRMNL / XIAO 7.5” ePaper picture frame DIY kit. The modification allows full access to the control buttons and the Inkpad charging port without the need…
Filament: PLA Infill: 50% Schichthöhe: 0,2mm Düsendurchmesser: 0,4mm ----------------------------------------------- Filament: PLA Infill: 50% Layer height: 0,2mm Nozzle diameter: 0,4mm
Made this cases to replace the damaged NST case, and since its going to be used as a TRMNL screen with no user interaction removed all its buttons. There is a small hole in the back to reset the unit. It uses 2mm flat head screws, the…
11.10.2025 update - added alternative V2 model with a less steep leaning angle.
It kinda fits: waveshare 7.5" e-ink screen with Raspberry Pi HAT (Waveshare 13504) https://www.waveshare.com/7.5inch-e-pap Seeed Xiao ESP32-C3 - WiFi/Bluetooth - Seeedstudio 113991054…
While there are plenty of TRMNL stands and cases, i wanted something that i can hook into the slots of an IKEA SKADIS panel, and also attach any other kind of mount i come up with. The USB-C port, power switch and all buttons are…
The wall-mounted enclosure was originally designed for the TRMNL 7.5" (OG) DIY kit. However, as I’m working with OpenDisplay, the ESP32-S3 (XIAO EE04 board) is only partially suitable for battery operation. Fortunately, the XIAO EN04…
Model wydrukowany na Prusa Mini. Do sklejenia po wydrukowaniu. Dodatkowo należy dorobić stojak (w moim wypadku ze znalezionych w domu fragmentów drewna). W karmniku dodatkowo zaprojektowano dozownik na ziarno, które automatycznie dosypuje…
Updated 4/23/26 - Includes version that lets you keep the metal stand attached.
This is a minimalist desktop enclosure and Glas thermostat-inspired wall sconce to display your Seeed TRMNL DIY kit with the 24-pin 7.5" B/W TRMNL display or the 50-pin 7.3" E Ink Spectra 6 Colour display. Note: Choose the correct Core…
Jedná se o násypku na krmné směsi pro odpadní trubku 75mm pro snadné doplňování krmiva slepicím. V nastavení tisku jsem zadal 0% výplně , a nula vrstev spodních a nula horních vrstev , pro jistotu jsem dal vnější obrys a 4 perimetry ,…
For my visit to the Formnext convention this year in frankfurt I wanted to have a custom makercoin/keychain to trade or give out. After thinking about it for a while I got the idea for a formnext themed keychain. Since I didnt want to…
The bird feeder is designed for small birds such as tits, sparrows, and bullfinches. Thanks to its extended roofs and deeply positioned seed trays, it is well protected against rain and pigeons. Three mounting methods! Hang it with cords…
Replace an blank wall plate to mount your TRMNL X on your wall without any additional modifications. Sleek and easy.
This clamp is designed for adjusting the firmness of slatted bed bases. It provides a simple and practical solution for customizing sleeping comfort according to individual preferences. The model can be used as a replacement for a damaged…
Petits portes échantillons pour rotor RMN 4mm (diamètre ext 5mm) pour RMN du Solide
This is a minimal DIY TRMNL stand compatible with an 7.5inch epaper display and Seeed Studio EE04 or EN04 driver boards with an 18650 battery.
❤ Support the Bats! / Unterstütze die Fledermäuse! EN: I do not earn any money with my designs. If you like my work, please consider supporting our local rescue team "Fledermaushilfe Kreis Plön" in Germany. Your donation helps cover…
For my visit to the Formnext convention this year in frankfurt I wanted to have a custom makercoin/keychain to trade or give out. After thinking about it for a while I got the idea for a formnext themed keychain. Since I didnt want to…
This wall mount is designed specifically for the TRMNL 7.5” (OG) DIY Kit. It allows you to securely mount your TRMNL device to a wall for a cleaner and more permanent installation. The mount consists of two printed parts, which are…
I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…
Updated 4/23/26 - Includes version that lets you keep the metal stand attached.
A solution for mounting your TRMNL og DIY KIT on a 10" rack with an additional button. You need: a few M3 and M2 brass insert glue M12 push button double sided tape and zipties for the batter This model can be printed on smaller printers…
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…
This is a minimalist desktop enclosure and Glas thermostat-inspired wall sconce to display your Seeed TRMNL DIY kit with the 24-pin 7.5" B/W TRMNL display or the 50-pin 7.3" E Ink Spectra 6 Colour display. Note: Choose the correct Core…
Made this cases to replace the damaged NST case, and since its going to be used as a TRMNL screen with no user interaction removed all its buttons. There is a small hole in the back to reset the unit. It uses 2mm flat head screws, the…
Für alle die auch ein wollten aber mich nicht persönlich getroffen haben.
Minimalist mount to secure TRMNL to a standard 19" rackmount blank plate. Uses 2x M5 Socket Hardware: 2x M5 x 10mm socket head screws; 2x M5 Nuts (standard M5x0.8mm thread). Designed to perfectly fit the hex grid spacing of THIS specific…
Combination Magnetic & Skadis mount for the TRMNL. You could print half for only the magnetic mount, or all for the skadis option. No supports needed! Magnets press fit in so no need for glue either! Locking pin to hold plate onto the…
This is a very simple refrigerator magnet mount for the trmnl e-ink display. It uses 4 small round magnets (8mmx3mm) that are super-glued into the base, as well as an M2x6 bolt that is used to hold on to the trmnl device itself. The mount…
A solution for mounting your TRMNL og DIY KIT on a 10" rack with an additional button. You need: a few M3 and M2 brass insert glue M12 push button double sided tape and zipties for the batter This model can be printed on smaller printers…
Idea After having printed @FliesWithWind's beautiful DIY TRMNL enclosure and with good success on my whiteboard, I wanted another mounting option. The requirements were: Easily removable device for charging or relocating Mountable via…
PL: Praktyczny karmnik dla papug montowany na siatkę klatki. Projekt posiada 3 pojemniki — idealne na karmę, wodę lub przysmaki. Konstrukcja została zaprojektowana tak, aby była łatwa w montażu i wygodna w codziennym użytkowaniu. Model…
Low profile wall mount for the TRMNL X, sticks out just 3.5 mm instead of the 20mm regular mount. Fits 4 10mm x 2mm magnets, to make sure the device can't accidentally fall off. Attach to the wall with screw or doublesided tape.
