Counting matching models…
a variation of the stock Creality spool that has no lip and is 31 mm in diameter. it comes with a lock, however the stock one will match as the locking track is identical to the normal Creality one
This is a derivative of Mike Kelly's enclosure over at http://forums.robo3dprinter.com/index.php?threads/mike-kellys-robo3d-enclosure.2712/ I cleaned it up and changed the design so that you can use either .236" or .25" thick material and…
I thinned the mount to fit under my Robo3D R1+ bed, and widened the bed mounts a bit to make it more centered on my bed (I found in some positions it could slide to it would cause the Y-axis switch not to activate). The plain template…
UPDATE version 2.5 I changed the front plate to include mounting holes for the RepRap FGD and made a nice cut away to make feeing filament easier. The controller case I'm using is the http://www.thingiverse.com/thing:505355 but it would…
Adapter plate for Mike Kelley's modular carriage v2 that allows the stock extruder to be mounted. I have not fully tested the mounting. Category: 3D Printer Parts
Stolen from https://www.thingiverse.com/thing:3541074 ALL CREDIT goes to Mr. Lance Weston I am just trying to keep this alive The purpose of these plastics is to improve the print output. To reduce ghosting the top plastic is beefed up to…
I really liked the Servo cover from https://www.thingiverse.com/thing:1154650 but I already had the chain from https://www.thingiverse.com/thing:696183 so I just changed the link on the servo cover. Excellent work from all around. It…
Improves airflow across the Robo's extruder nozzle to improve bridging and overhang performance. Designed to fit directly on to the current generation R1 with hexagon extruder. Should be printed with ABS or other materials with a high GT…
I elongated the spindle on the original design to ~140mm so that it can accommodate large spools. I recommend printing for strength for the heavier spools. I printed in ColorFabb PLA/PHA (a little stronger and more flexible than normal…
This is an adapter mount to be able to install an SKR board (such as SKR 1.3, SKR 1.4) onto the Robo3D R1. It utilizes the existing holes on the R1. You will want to get a USB cable extension that can be mounted on the side of the…
Customized version of http://www.thingiverse.com/thing:538624 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=538624 Instructions Using the following options: _line_height = 0.1 _spiral_gap = 20 _bed_type…
I had to print at PLA, 25% infill. Carbon tube 8mm lightly sanding with sandpaper The bearings I sized them too. http:
A very simple cable holder for the RoBo3D. Use a M3 screw and bolt to hold it in place behind the X axis motor. You might have to drill open the hole behind the motor. V2.1: I had some problems with homing the Z axis as the whole Z…
For those who are still rocking the ROBO3D R1+, I have an overhead spool holder for you! If you're having trouble with cardboard roller 608Bearing Roller Flat.stl can help. Few changes I made from PhilG's Design; Fits 608ZZ Stake Board…
I have been running my Robo3D R1+ somewhat reliably through Octo4A, an Android Port of Octoprint. I use an older secondhand LG-G6 Phone as the server device, and wanted a more permanent way to mount the device to the printer, while…
