Counting matching models…
Moroccan Style Modular Bathroom Accessory Set: 1. Square soap dispenser or toothbrush organizer 2. Hexagon cotton pads/swabs holder or toothbrush organizer 3. Rectangle toothbrush organizer with toothpaste holder Note: - The soap…
My recreation of a Moroccan craft featuring hand-cut ceramic tiles glazed in different colors that interlock to create typical Arabesque & Islamic art geometrical patterns. This form of traditional art is seen in centuries-old palaces and…
It fits by pushing it just on the keyboard. For this purpose the center hole is 0.2 mm smaler than it should be. My printer makes holes this size 0.3mm smaler so the fit is nice and firm. remember to check your own clearance! Custom…
You're enjoying your Roccat Keyboard but still have no place for your phone or tablet? But you have a 3D printer and come to the right place ;) These two models are variations from the models you can find at https://en.roccat.org/Labs/3D…
These replacement parts replace the weak headband mounts of the Roccat ELO headset. If printed with the settings described below, it is more sturdy and durable than the original. Printing For the best result, I recommend to print the…
Accueille une douille type E27 Prévue pour être montée sur une boite d'encastrement de 67mm Réglable en hauteur sans outils. Instructions : Attention toujours vérifier que le courant est coupé ! Passer le cable dans le trou du support…
This smartphone stand can be put onto the back of the keyboard. There are no screws needed, simply slide it onto the back of the keyboard. The model is designed to print fully without supports.
This is my first design, I hope you enjoy it, after what happened in Morocco, I have decided to make this design as a representation of the damage caused by an earthquake. About the design: - It is not only aesthetic, in the correct size…
remixed this to no longer need supports,
Replacement foot for Roccat Ryos MK FX
I broke the clips for the metal support bar during dismantling and decided to design some replacement ones. May require a bit of heat to get the metal bar seated properly and moving fairly freely. Model might need a bit of tweaking for…
moroccan zellige pattern
UPDATE: I recommend using this remix if you have the hardware https://www.printables.com/model/656946-roccat-elo-headphone-fix Print with PLA 3 perimeters, 3 top and bottom layers, 15% infill and supports turned on. (tested on an ender 3…
3D scanned my Roccat Kone AIMO Mouse to make desk stands. Scanned with Creality Lizard.
I broke the clips for the metal support bar during dismantling and decided to design some replacement ones. May require a bit of heat to get the metal bar seated properly and moving fairly freely. Model might need a bit of tweaking for…
2 stencils included. The outline of the window and the window pane outlines. Size is 175 x 175 x 1 mm
Keyboard Clip für Roccat ISKU Tastatur, als Ersatzteil. Das Teil ersetzt den Aufstellclip an der Unterseite der Tastatur, falls dieser defekt, oder verloren gegangen ist. no support, high infill
This is made for a Roccat Vulcan 2 but it may work on other keyboard. It's not a perfect fit on the keyboard side because I've added double tape to make it not go away when I click on it. To place the Stream deck, place the bottom first…
Introducing the Mystic Moroccan Lantern, an intricately designed tealight holder that brings the magic of Moroccan architecture right to your home. Whether you're adding a touch of exotic charm to your living room or keeping your…
Handyhalterung für die Roccat Horde AIMO Tastatur
⚔ Stat Block: Aziel Roccar – Blade of the Veil Medium humanoid (half-elf), lawful neutral Armor Class 16 (Chain Shirt + Shield) Hit Points 84 (13d8 + 26) Speed 30 ft. STR 17 (+3) DEX 18 (+4) CON 14 (+2) INT 11 (+0) WIS 14 (+2) CHA 13 (+1)…
I did not take into account the extrusion width when designing so printing it with 0.4mm nozzle doesn't produce very good quality. It seems to work regardless. Material used: PLA It's best to glue a piece of rubber under the feet before…
Print Advice: Use Paint Support on the side knob. You can remove the rubber parts of the original part and glue them into the notch
SparkFun USB-C Breakout Board adapter for ROCCAT Vulcan keyboards. Pictures should explain most, if not there is a Reddit thread showing the build with more pictures. Reddit Thread for build.…
Schichthoehe 0.2mm, 3 aussenkonturen, 50% fuellung
A stand replacement, matching various Roccat Isku keyboards. Printed with PETG, but PLA should also work. 0.4 and 0.25mm nozzles work. Layer heights between 0.12mm and 0.2mm worked for me. Happy typing!
Travel cover for Mühle Rocca safety razor. Vented for better drying.
Architectural vase inspired by Moroccan lattice and mashrabiya patterns, featuring geometric reliefs and layered ornament. This sculptural vase works beautifully as a decorative object, plant holder, or interior accent. A calm yet…
Simpler Wandhalter für einen Mühle Rocca Simple Wallmount for the Mühle Rocca Fühlt euch frei mir verbessungsvorschläge zu schreiben Feel free to tell me about improvements Settings Filament: PETG Infill : >30% No supports needed
Keyboard leg for roccat vulcan. You will also find this on makerworld. That is also my model.
Castello Medievale diroccato
Clips into a screwhole, and snaps in. I printed it in petg, pla might be ab bit to brittle. Decide on walls and infill yourself you know how a 3D printer works. its not stiff, but if your keyboard wobbles so much that it fails, maybe…
Simple Plug replacing the original cable. The original cable can just be unplugged and easily clips out. USB-C Connector is just a generic one from Aliexpress. Mine is a tighter fit, you need to really clip it in, but that will depend on…
Moroccan flag with spots for four Prusa standard 20x6mm bar magnets. Designed for INDX, XL, or MMU. Check out the whole MagFlag Collection Here Enjoying my models? Keep me caffeinated and help support more development by buying me a KoFi!…
It gets easilly broke, so I created this replacement part. Printed from PetG or try ASA
Somewhere to keep your Berocca tubes, sized to the tubes rather than to a guess. Two rows of four, and any other layout you like. Files STL : berocca_2x4.stl. Two rows of four, any slicer. SCAD : Berocca-Holder.scad. The parametric…
Overview A lightweight, openwork Moroccan quatrefoil frame designed by hakkaisha for decorative displays. Use it as a stand‑alone hanging ornament or as a skeleton to wrap with fairy lights, flowers, foliage, or seasonal decor. Sized to…
An ornate Moroccan lantern-inspired garden stand and rain shelter for the Amazon Echo Dot 3. The modular pedestal raises the lantern 36 in (914.4 mm); the complete sculptural assembly is approximately 56.6 in (1,438 mm) tall. FEATURES •…
An ornate Moroccan lantern-inspired indoor stand adapted for Amazon Echo Pop, with pierced panels, an onion-dome roof and separate finial. The modular pedestal raises the lantern support surface 914.4 mm (36 in). ECHO POP REVISION…
I found this i found this model but i could not use it because the model on cults but it did not work for me because the headstrap always slipped out of the connector, so i just added a hole for a m3 screw. I printed it with PC Filament…
Halter für den USB Extender der Roccat Kain 200 AIMO. Kabel lässt sich zum laden der Maus entfehrnen und entfehrnen ohne den Extender aus dem Halter zu lösen.
BOM: Printed with ROSA3D High Speed PLA Army Green This model features a stylish, cylindrical design with a classic Moroccan Trellis (or Ogee) pattern. Unlike the sharp geometric shadows of my previous models, this one casts soft, curved,…
Moroccan Night Light Printing instructions: Printed on Bambu PS1 printer. No supports. 0.4 nozzle 0.20mm Standard Layer height 0.12mm PLA Material Printing Time: 2H 34 minutes. Light Base: This light was designed to work with this…
Holds a 6mm x 3mm magnet. I have uploaded 2 versions. The first needs to be paused midprint to insert the maget it. With 0.2 layer-height, the pause needs to be done at layer 20 (in pusaslicer, just click the + on the preview slider) In…
Unfortunately my keyboard fell down while cleaning and the base broke. I wanted to glue them first, but luckily there is 3D printing. So quickly measure the still intact one, construct it, print it, and it's like new.
This planter holds water as a tray and provides a decorative outer container for a 4" nursery pot -- it is large enough to fit some of the taller ones, but not too big for shorter square planters. I also have round pots that fit well in…
Coin for Shopping Carts, created from the Roccat logo. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Sunlu PLA PLA Gold Category: Coins & Badges
