Counting matching models…
A simple Roku 4 mount which can be drill and mounted to the back of a TV or the wall. OnShape Files: https://cad.onshape.com/documents/22cf5ba2a5bd3e4e742bf625/w/fff3ecb18c7e2174d10fcffd/e/a9512e2c919459721480c00f Filament: PLA Filament:…
My Roku Device came supplied with just double sided tape to hold it on top of the TV The tape failed after a while This bracket does a better job of holding it in place Printed in PETG - no supports needed.
I wanted to be able to keep my TCL Roku TV remote by my backdoor, so I designed a wallplate that could hold the remote. This has mounting holes that fit a standard US electrical wall box. UPDATE - 2026-01-22: I've added yet another…
Made Custom battery holders as the ones that came with the car were just too bulky and for some batteries got in the way of the cables. Both short and long versions. I have the FZD2 AE86 so I put HachiRoku on it. You are welcome to change…
I designed this case as an alternative to the leather half case these cameras came with. It screws into the tripod mount with these screws, or something similar. The screw mount is designed to print without support, so you'll have to cut…
Replacement directional buttons for Roku tv remote after my dog chewed the original ones out of it.
This is to mount the Roku Express under the th when wall mounted using the screws for the feet
A wall mounting holder for your roku remote! Just use a nail or a command strip to put it on the wall where you want put the remote in and your good to go!
Print on the side with a brim. The legs have a tendency to warp unless you're printing in an enclosure. The original model was modified to fit a smaller TV. There is a second file with tapered holes to accept a larger screw head.
This is a small pot for raising plants with hydroponic. The second Inlay(water) is for use with the smallest “Leni Hydrokultur”-Waterlevel gauge. (For this Inlay you need support) Prevent waterlogging with the raisers (3 or 12 mm) use 5…
Print in TPU or Flexible PLA. This adapter is intended for a wide variety of Roku remotes. Designed to slide over the bottom of the remote, this adapter securely holds an Apple AirTag. Never lose your remote again!
use double sided tape to attach this remote holder under a desk or table
A simple remote holder for TCL brand Roku smart TVs. Mounts with either two screws or adhesive similar to a command strip. Category: Organization
Just a simple holder sized for Roku remotes. There is a recess in the back for a removable adhesive strip. I printed a in PLA at 0.25 mm layer height and 20% infill.
Tired of accidentally hitting those channel buttons on the bottom of your Roku remote? Well not anymore! Every other solution I've found, involved taking apart the remote to replace the buttons or disable them. Now you can just clip this…
A mount to place a Pebblebee Tracker tag on a Roku remote. I attach it with thick double-sided tape between the mount and the remote, and thin double-sided tape between the mount and the tag.
It seems as though every Roku remote has different specs. And they are all vulnerable to breakage of the battery cover. So here is a replacement battery cover for the Roku Voice Remote, model RCA1R, ASIN:B0BQS9Y69G. I print it on my Bambu…
A remote holder for the GE Roku remote replacement from Walmart. I mount mine to the side of my coffee table with double sided tape. Could also work if you just want your remote upright on your table. Print face down and it won't need any…
Small parts fo my railway building based on Rokuhan Z shorty system. Base si for simple Rokuhan oval R45 with two 55mm straight parts. More photos: https://www.rajce.idnes.cz/album/Tb2YQSNujqPQIvu7
Um im Bad etwas Ordnung zu schaffen, habe ich einen Mundduschenhalter für die Prokudent Munddusche gestaltet.
This holds an LG and Roku remote, can be taped or glued to the corner of a table or shelf. Printed with prusament PLA, 0.2mm layer height, 0.2mm fuzzy skin. Fit is close with the remote so print settings or scale may need to be altered…
Hole Cutaway on base for cloth tag. Hope this works well for you guys!
I have a SKADIS pegboard by my bed, and wanted a way to store my Roku TV remote without taking up space on my nightstand. Thankfully, someone had created a remote holder and provided the Fusion 360 files on here. I made a couple quick…
The Hisense HS214 soundabar doesn't quite fit between below the Hisense 43" Roku TV (why Hisense, why?) so I needed a part to raise it up. protius2 on thingiverse made this television lifting shoe for the same TV but it was too tall for…
I modified an existing Roku remote holder to hand on my son's headboard. I included 3 files. One for a single color in Orca another of a 3 color model, also done in Orca. But you can use any of them in any slicer.
This will cover the branded buttons on the lower part of the remote plus the guide and quick launch button to avoid accidentally pushing them. There are 2 files. One that covers all 6 buttons and one that leaves the quick launch button…
I used Mathew Lee's blank model to add a simple Roku Remote form. The blank is fully parametric. I'm pretty new at Fusion 360 but I'm pretty sure the form is constrained as well. The user parameters to adjust the form are BL and BW.…
It holds your remote just put sticky strips on the back and put it on the wall.
A simple Roku 4 mount which can be drill and mounted to the back of a TV or the wall. OnShape Files: https://cad.onshape.com/documents/22cf5ba2a5bd3e4e742bf625/w/fff3ecb18c7e2174d10fcffd/e/a9512e2c919459721480c00f Filament: PLA Filament:…
Context: My mother in law needed some way to hold and keep track of the Roku remote while spending time with my children. I designed this up to attach to the playpen. Design: The holder is sized for a standard Roku remote. The hook is…
Filter holder 8.9x8.9 cm for use in the Krokus 4sl (round) photo enlarger. The filters I designed the holder for are Foma Varian Filters (8.9x8.9), but should work with others. It consists of 2 parts - the holder itself and the pressure…
Bronzový pomník selského povstání roku 1775 se nalézá u silnice I.třídy spojující Hradec Králové a Chlumec nad Cidlinou v okrese Hradec Králové . Bronzový pomník z roku 1937 je dílem akademického sochaře Jakuba Obrovského a je chráněn…
I am tired of my little Roku remote disappearing in my workspace. I designed this in Plasticity. I usually use AutoCAD or SolidWorks but wanted to try something different. Plasticity has a little learning curve, but not that bad. I think…
Designed to fit a Roku Express device, including the remote, USB charger, cables and (spare) AAA batteries. My specific Roku Express is the FHD model. I am not sure if the 4K model is the same size. Based on SnapLock Storage Boxes…
This is my mount to put my Pan Cam v3 on top of my TV, the two tabs lock it in place on top of the tv, simply put the two tabs facing down on top of the TV and the Wyze Pan Cam v3 sits right on top. There is a cut out to accommodate the…
Pierścień pozwala na zamontowanie szpuli paterson w zbiorniku Krokus 2000, wystający trzpień blokuje pozycję szpuli co pozwala na obracanie całym zestawem.
Needed a means to store three specific remotes (Philips all-in-one, Roku, and generic wireless AC plug) in horizontal fashion. This does the trick and is offset so all three remotes push out of the holder/caddy by about the same length.…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
Basic remote holder to be attached to a bedside table/ nightstand, or the back of the tv itself. No screw holes currently, but feel free to leave a comment and I can always add them should you need it.
COMBO LG, FIRESTICK, ROKU, ONN REMOTE HOLDER Category: 3D Printing
Model in photos is printed with Polymaker PolyMax PLA. Recommend 3 wall loops, 20% gyroid infill, manual tree supports (see photos for Orca Slicer screenshots).
A simple Roku TV Remote holder that takes 1 screw. You can still turn up and down the volume.
A pedestal for the Roku Ultra to raise the height of the Roku's infrared receiver when placed behind an object. The current pedestal heights are 10mm, 25mm, and 50mm. If you need a pedestal with a different height, send me a message and I…
Fold-able legs/stand for TCL TV so that you can fold them in and hang the TV on a wall (I have a wall mount I will share seperately) Category: Replacement Parts
This model was designed to solve a problem. Mainly I kept losing my Roku TV remote. So I designed a holder for it. It is mounted using double sided mounting tape.
I got tired of the useless preset app buttons on my Roku remote, so I designed a clean replacement panel. No more accidentally launching Netflix when I meant to pause. Now there is just smooth, satisfying blankness instead of four ads…
Remove those pesky advertisements from your roku remote. Remixed version for the rechargeable remote to add the 1 and 2 buttons to the delete. I dont own this remote so I have not tested this version.
Este encapsulador de control para tv Roku es perfecto y único que combina bien su autenticidad y ergonomía con su control
Printed upright with no supports. Printed originally with PLA. Part to fit bed frame is 31mm. To fit to your bed frame use cross multiply. ['your measurement' * 100% / 31mm]. This will give you your percent scale factor. REMEBER if you…
Replacement battery cover for the TCL Roku RC-AL5 remote control. This model appears to be dimensionally accurate but is a very difficult print. It requires supports at any orientation. If you have a successful print and fit, please let…
Man I hate these buttons. I get that Roku uses their placement for revenue but doesn't mean we can't over engineer a solution to an inconvenience. This is a super fast print and under 2g. I used PLA that was loaded in my CC from a…
remoix of TV/Roku remote holder for added airflow, and wall mounting
My Roku Device came supplied with just double sided tape to hold it on top of the TV The tape failed after a while This bracket does a better job of holding it in place Printed in PETG - no supports needed.
I wanted to be able to keep my TCL Roku TV remote by my backdoor, so I designed a wallplate that could hold the remote. This has mounting holes that fit a standard US electrical wall box. UPDATE - 2026-01-22: I've added yet another…
This is a replacement TV leg designed for TCL Roku televisions when the original stand is lost or broken. It closely matches the factory geometry and mounting style, providing a stable, clean-looking solution without needing wall…
Drobné hračky - Novoroční Dráček (jako z Kinder vajíčka), rychlý 3D tisk hračky (max. 45 min). Má verze z PETG...ale PLA bude lepší :)
This Holder fits a Roku TV Phillips remote. Will most likely fit most small remotes. Make sure the orientation of the print is as shown in the photo! Holder pocket size: 43 × 23 × 50 (L × W × H). If you need any assistance or require a…
These are designed to click onto the factory SideClick mounting tabs, and fit snugly onto the Roku Voice remotes. They are designed to print with no supports, with the flat on the bottom of the remote flat to the bed. Simple, strong,…
This fits the 3 different Roku remote models we have here. Sorry, don't know their official names. It just snaps on over top of the buttons. I recommend printing it on its side (the default orientation of the model) with a brim. I printed…
This is a case I made for a 4" crt off amazon. I have space for a battery, speakers, and whatever else you might need. Here are the things I used in mine:…
Printed using my Qidi Plus 4 with 0.6mm nozzle. Printed solid. I used M6x12mm bolts in the back of the streambar to attach to the keyhole slots in the mount. The mount spaces the streambar just far enough away from the wall for a standard…
Wall mount holder to house Roku and Peloton Guide remote. Remix of JLG510's model.
This is the updated version of my Roku Remote Wall Plate Holder! It accommodates 3 different kinds of Roku remotes, has 3 different sized wall plates, and now comes in 1-gang or 2-gang plates with a light switch cutout ! Please refer to…
Made Custom battery holders as the ones that came with the car were just too bulky and for some batteries got in the way of the cables. Both short and long versions. I have the FZD2 AE86 so I put HachiRoku on it. You are welcome to change…
I designed this case as an alternative to the leather half case these cameras came with. It screws into the tripod mount with these screws, or something similar. The screw mount is designed to print without support, so you'll have to cut…
I modified the Wyze Camera Holder from Crimson Caboose to work with the Roku Indoor Camera. Easily mounts to the Flashforge A5M or AD5X.
Replacement directional buttons for Roku tv remote after my dog chewed the original ones out of it.
This is to mount the Roku Express under the th when wall mounted using the screws for the feet
used to hold your Roku remote so you do not loose it
A wall mounting holder for your roku remote! Just use a nail or a command strip to put it on the wall where you want put the remote in and your good to go!
Created this case as my Roku Premiere was constantly displaying an overheating message . Simply pop the cover off your Roku and slide it into this case. The top has a cutout for a 20x20mm heatsink secured with some thermal tape. The Front…
I bought Kamui Roku 6 chalk, but I couldn't find a case for it, so I designed a case that fits exactly, you can use it for carom billiards, pool, snooker and more.
I made this model because i often have the problem of loseing my tv remote so i decided to make this extreemly simple model! this model was made on tinkercad since i have not yet gotten a proper 3d modeling software.
Contains two models. The remote full assembeled scan and just the battery cover. Did spend some time cleaning up the tabs in Blender, so if you found this usefull please give it a like.
Just a simple insert for those who don't like games in baggies. Everything fits in its own box, fits sleeved cards, with no lid lift. It quietens the OCD monster, for a little while…
