Wall mount remote holder for Roku etc
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw the holder to your wall with drywall screws and keep your remote in there.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 193
- Makes
- 1
- Views
- 557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
There is a sacrificial strip included to help your print not pop off the build plate as shrinkage happens, especially if you use ABS. You'll cut that off. I suggest a brim with a small gap too.
Make sure the bridging angle is good for your printer or you may have to put a small support in the middle to assist that.
Added the freecad file so folks can play with it as needed.
Also added a slightly larger and more rounded version. This will work with more remotes and ensure your screw doesn't scratch the back. Scale it down slightly (5%) for standard roku remote.