Wall mount remote holder for Roku etc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw the holder to your wall with drywall screws and keep your remote in there.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
There is a sacrificial strip included to help your print not pop off the build plate as shrinkage happens, especially if you use ABS. You'll cut that off. I suggest a brim with a small gap too.
Make sure the bridging angle is good for your printer or you may have to put a small support in the middle to assist that.
Added the freecad file so folks can play with it as needed.
Also added a slightly larger and more rounded version. This will work with more remotes and ensure your screw doesn't scratch the back. Scale it down slightly (5%) for standard roku remote.