Counting matching models…
Description Boilie rollbar for making 16mm boilies used for carp fishing. You can see how it works here . You can also print 20mm version from this link . Specs: Dimensions of this tool are 12x15 cm (height of the tool is 32mm). You can…
rollbar and flatbed for the ascent use the shocktower mounts to secure the bed, rollbar screws in the bed with 3 2.5x10 (reused screws from the ascent) supports screw in the rollbar with 2 2.5x10 (also reused screws)
The shown rollbar frame was sliced using the standard 0.15mm settings from Prusa Slicer and printed using Prusament PETG. The left and right side were printed separately without any support. If you are advanturous, you could try the…
Fun drawing of a Roll-bar for RC cars. Scale and print ore make from tubing with printed parts.
Made for 1.5" or 38mm diameter rollcage or rollbar. Bolt through holes are meant for M6 bolts. Print as shown, at least 60% Infill for strength
So this is my first part for the FCX18 K10. In this case there will follow some more.
Retro Rollbar for RC truck, print at 100% infill, size to your needs
I was sick of tossing my coat and dry cleaning on the back seat so I designed this hook to wrap around the roll bar padding which is just about 3" diameter. It hinges open to slide around the padded roll bar, then when something's hanging…
A GoPro mount for 45mm (1.75-1.77in) rollbars! Made for Blackbird Fabworx GT3 and Hard Dog “Hard Core” MX-5 Miata rollbars. The model has clearance for felt strips (or other non-marring material) around the clamps to help dampen…
This case is intended to print without any support. It's a total of four parts - Top, Bottom, 2280m.2 brace and (optional) screen mount. It's accommodates 2280 length m.2 drives. It has mounting place for a 4010 fan above the Pi's SOC.…
The parts are for the ABS HardBody, which is sold by Team Raffee, Injora, and various other Chinese labels (the PickUp version of the body). If you want to rebuild it and put it on a TRX6: I also have various TRX6 chassis parts here on…
Rollcage mount for Baofeng handheld Radio. For mounting a handheld radio behind a driver's seat in a racing car, use a helmet speaker and receiver + PTT Mount with m3 nuts and bolts Vertical mount added due to popular request “clamp”…
The wind stop gaskets on some Ferrari 360 and 430 Spiders are subject to deterioration and cracking. The replacements are expensive (about $1k for all three) and only available as OEM. The current aftermarket wind stops are horrible and…
Rollbar Collar for the new B7, the prices Team Associated charge for these little bits of blue is quite staggering so if you lose one or just dont wanna buy, then download these. Theres a big and small for bigger and smaller rear…
Updated file provided by the guys on the 1st GEN 4RUNNER MAFIA Facebook group! Matchbox 4Runner Roll Bar 003C.stl ←download this one, it's a lot cleaner Made 100% by eye, most definitely will not be dimensionally accurate also I'm not…
RollBar Guage Pod Mount for 1.75" bar - 2 pods I used double-sided tape and Zipties to hold it on
Print two of these two secure an E50 Element Fire Extinguisher to your rollbar. https://elementfire.com/products/element-e50 The clip has an internal zip-tie channel to secure to your rollbar.
Set of part to make the Newray YXZ 1000R look more like your beloved Z :) The cage comes in 2 flavors, with or without the top panel. There is a set of mirrors that press fit on the bar, but I used some double side tape to keep everything…
Just remixed SRC3D-1s Raspberry Pi 7" touchscreen rollbar frame because I wasn't able to rotate the display in the latest OctoPI + Octodash version.
This part snap-fits onto 1.75" rollbars. It has a thru-hole for ¼"-20 screws (buttonhead) to attach cameras or other accessories. If you need it to be more secure, simply run zip-ties through the internal channels.
My NB8B came from factory with speakers in the windblocker. When I installed a rollbar the windblocker had to go unfortunately. This speaker pod is designed to mount to a Mirack 'Herrero' Rollbar, or any rollbar with 45mm OD tubing. The…
A fun little afternoon design, this is a rollbar mount for 45mm roll bars (And adjustable +5mm) for a beats pill speaker, so that you can still jam out in your racecar.
Having installed a real (non-decorative) roll bar in our 1991 Mazda Miata, I wanted something to give it a more finished look and conceal the butchery that had occurred cutting the parcel shelf and its carpet to fit it. There are…
Miata / MX-5 Rollbar Cupholders Cupholders designed to bolt directly onto a Miata / MX-5 rollbar. Rollbar tube diameter: 45 mm ~(1.75") Hardware: 4× M5 bolts + 4× M5 nuts Material: PETG recommended; ASA is ideal for higher heat and UV…
JAC considers these caps parts that come with an accessory (rollbar), so they don't sell replacements. The cap bases on my truck got deformed and broken by the dealer, when they removed the rollbar to install a cover on the truck bed. I…
Boilie rollbar for making 20mm boilies used for carp fishing. You can see how it works here . You can also print 16mm version from this link . Specs: Dimensions of this tool are 15x17 cm (height of the tool is 49mm). You can stretch…
I've had several Hi-Lift jack mounts for my Jeep TJ over the years but recently started using this mount from Amazon: https://www.amazon.com/dp/B0C3VJ5LYN?ref=fed_asin_title This model is two pads to fit between the jack and the mount on…
Rollbar Steering Wheek Hook Built to suit a rollbar/rollcage with diameter of around 43mm. I added some pvc tape to give the hook a sturdy mounting surface. See it in action: https://www.youtube.com/watch?v=GAKbDN4hifI
U-bolt Saddle for 1.7" roll bar Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm (cura) Infill: 20 Filament: any PLA any Category: Parts
This is just a simple little stand case thing to protect your Orange Pi 5 Plus. It works with the Orange Pi Official Aluminum Heatsink ( Amazon # B0CJ9HTKMQ ). I have more versions of this that work with different cooling solutions, I'll…
This is a simple little protect case/stand thing for an Orange Pi 5 Plus and the Official Orange Pi Aluminum Heatsink. This version of this case has a place to mount a 40mm x 10mm fan (not Noctua). The heatsink this case works with has an…
