Counting matching models…
A cute little astronaut with it's backpack. Printed it with supports, wouldn't recommend to scale it down to 80% and less. It's only working with 85% and up. I scaled it to 85%. Have fun <3
I'm the kind of guy that likes a lime wedge in my Corona (or Sunbrew), but my wife insists I remove the lime from the bottle when I'm done. After struggling to remove a few too many lime wedges I learned that this tool exists, and I…
Rafts: Doesn't Matter Supports: Yes Resolution: - Infill: 15
AI-generated astronaut. Supports required. Now with flatter soles on the feet to stand without modification or supports.
I really like the original model but I wanted to print it in two different colored parts. This is a bigger remix without the ring on the top and with the visor cut out to print it in a different color. No support needed.
Subscribe Now! Time-lapse print video : https://youtu.be/6LVUM_R6hHY Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D Printing? Watch these time-lapse!…
ZeroG Astronaut, printed for fun or serial videos for the Mercury One! Recommended settings: 10% infill 4 Perimeters 4 top/bottom layers
* NOTICE: I reuploaded the correct file - uploaded wrong file earlier that could cause slicing problems * Because it had to be done. The CoronaBeholder is a particularly nasty floating bag of eyeballs. Now, it can't transmit any diseases…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. If you find these for sale on Amazon , Etsy or anywhere else, they are…
🚀 A minimalist astronaut optimized for easy 3D printing without supports! 👨🚀✨
A SpaceX “Starman” Astronaut Helmet for Lucky13 , Dummy13 or Easy13 Print with white PLA or PETG and use a black permanent marker to color the visor. You need a little bit support on the bottom (see Prusaslicer project file) Two sizes…
use the supports only for the upper slot for the LED and the helmet.
Astronaut sitting on the moon from thingiverse
This mask can be used with a piece of textile or cotton pads as filters. You can also use it as a respirator if you have respirator filters. It's better to print with PETG or ABS so you can wash it in a dishwasher. Please print at 100%…
Llaverito de astronauta abrazando a la luna. Tamaño: 23.34 mm x 26.68 mm x 27.6 mm
Baby Astronaut, Can be printed on A1 Mini. You can print in PLA, PETG, ABS. Support are little hard but you can remove them very easily. Enjoy
🇲🇾 Selamat datang ke Malaysia! Welcome to Kuala Lumpur! This model was created by MiniWorld3D member Trevor DePodesta (@ coold3d4me ) www.cool3d4me.com The Petronas Towers , also known as the Petronas Twin Towers (Malay: Menara Petronas,…
Celebrate one of football’s greatest icons with this smooth, stylized bust of Cristiano Ronaldo. Designed with clean contours and simplified detail for optimal 3D printing, this piece captures Ronaldo’s signature look — sharp jawline,…
Astronaut test print , i addes a ring on top for use like keychain printer ; longer lk4 pro filament : sunlu pla+ silver
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. These are tools for my “ Dummy 13 goes to the moon ” (remix) of the…
GI Joe Gemini Style Astronaut Helmet For those in the know - Joes can have a variety of head sizes. I designed this one to fit the larger head size I had in my collection. I use raw filament for hinge pins and as a means to attach the…
2 version with and without backpack
This soap tray helps to keep soap dry and not dissolved by water. Bottom of the holder is at an angle and thus water flows out of it. It helps to keep traditional soap for longer use. Soap is your best defence for coronavirus. Use it…
For an extra magical touch, you can place a small LED tealight under the campfire to bring it to life with a cozy effect. You can find variations on my profile !
A slice of lunar surface with craters, ridges and dust ripples across the top, a small astronaut figure standing near the edge, and a recessed well sized for a standard tealight. With a candle in it the crater walls throw long shadows…
Face mask to protect against air born viruses like coronavirus. Mask is not a one-size-fits-all. You may need to print at different scales to see which one works best. Features: -Comfortable fit for extended use -Optimized strap buckle…
All rights go to Nooblessy . I only prepared the model for multi-material printing and brought it to printables. Print instructions Supports are recommended print in PLA 0.2mm layer thickness you are welcome to use the .3mf file, I have…
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
I created this solid model from a Popular Mechanics template from their July 2006 edition. I've made many of these Adirondack chairs at 1/10th scale on a Prusa Mk3s+ 3D printer. I print it out as individual components and assemble using…
I liked idea of simple clip to make a mask. I dont have access to sewing machine, so I wanted to use a 3D printer. And I have ended up with Fusion 360 to model this simple clip. Its easy to print from PETG, and with 0,3 draft its also…
I designed a door opener to fight aganist the spread of the Coronavirus (Covid-19). You can avoid touching the doorknob with this 3D printed door opener! Please share this design so we can stop the coronavirus epidemic! Print instructions…
2D plate / wall display for the astronaut space suit patent by NASA from 1973. Reflects designs from the later Apollo missions (15-17) as well as the Skylab suit. Inspired by Ken Mills' patent art 2D plates (…
I remixed the astronaut in Meshmixer by reposing him to stand more upright. I also rotated and raised his arms you in front of him to make a watch holder. I was concerned tat he would fall over so i tried to com up with a base to widen…
Hook for contactless opening of doors Print instructions Resolution .2 20%
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
" I N F I L T R A T I V -- S C U L P T U R E S " Open Source Art Project / Non Commercial / No Sale Ready to print: APOLLO ASTRONAUT // DETAILED SPACE SUIT Figure Scale ca. 1:10 / 19cm Artist website: http://www.grueter.com Other…
Holds any plate/cup/bowl or other object on the table. Objects <25 mm thick can be stored in the side compartment. I use it for phones, remotes, chargers and snacks. Made two of these for my IKEA LANDSKRONA couch, however it should fit…
"It belongs in a museum!" - Indy I'm happy to share the Cross of Coronado from Indiana Jones and the Last Crusade . This package comes with everything but the Crucifix Jesus Figure; I got mine from 123D, just search for Crucifix christ .…
Pequeña figura de astronauta para adornar tu escritorio o estantería. Tamaño: 70,03mm x 80,04mm x 82,8mm.
Just a monkey remix of this print. Category: Animals
un corno napoletano pensato per portare fortuna in casa, infatti questo corno puoi tranquillamente poggiarlo nella sua corona e tenerlo su un qualsiasi mobile in casa così da tenere le malelingue fuori dalla portata della famiglia stampa…
This figurine is designed to be printed without supports. No assembly required.
You can support us by purchasing our paid model to get more free products.
Haunting skull-faced astronaut head—detailed, eerie, and perfect for sci-fi or horror-themed collections. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Replica de KURONAMI VALORANT Esta replica cuenta con 3 versiones: Kuronami de piezas múltiples. Kuronami bipartido. Kuronami monopieza. Tolerancia de modelo: Uniones con 0.05 de distancia entre piezas.
Cute customisable astronauts: Cosmic Cuties No supports needed for the sitting cuties, but supports are required for the standing astronauts. Choosing your Cosmic Cutie: They are made for 16mm marbles (see below for different sizes). The…
Minimal supports, maximum cuteness. ✔ Prints in just 20 minutes (mono-color version) ✔ Ideal for keychains, gifts, or your mini space display ✔ A loyal crew member to any FDM fleet00
Just scale the model to 0.3 Design by MatterHackers https://creativecommons.org/licenses/by-nd/3.0/ Category: Toys & Games
A cute and practical SD card holder Great for FDM printing Needs no supports Suggested print settings: scale: 65% (SD card holder) print quality: 0.15 mm
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Articulated Astronaut Robot 3D Model Blast off into creativity with this print-in-place articulated astronaut robot! Featuring movable arms,…
This item not only adds an artistic touch to your space but also provides a pratical solution to charge your smartphone within reach in an original way. I tried to optimize the design and the slicing to use as minimum filament as i can do…
This is a very detailed bust of football player Cristiano Ronaldo Supports = yes, i used tree supports
Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Cristiano Ronaldo Template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The…
Die Kameraarme dienen der Montage der für Autodarts benötigten Kameras mit einem Lochabstand von 28x28 mm. Einen vorhanden Target Corona Vision kann weiter benutzt werden und dient gleichzeitig als Versteifung. Alle die keinen Corona…
This Astronaut was made by Revopoint POP. If you want to get more models like it, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Category: Sculptures
Cristiano Ronaldo Portugal National Team.
Cristiano Ronaldo Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Motivation Having different tooth brushes (Happy Brush and a standard one) and also different toothpaste tubes (Elmex/Aronal and a different brand in case of my wife) standing on our bathroom shelf demanded for a better organization. I…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Dummy13 may not have the right stuff to go to the moon, but that's OK,…
Astronauta lego diseñado, para poder ser impreso y ensamblado por pieza
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ eSun Black PLA+ Sunlu Blue PLA+ Sunlu Red PLA+ eSun Yellow PLA+ Sunlu White Swap Instructions: Start with Black At layer #7 (0.64mm) swap…
Modeled this up for fun. takes a few pieces of 1/4 in dowel. will probably need gluing and sanding. Category: Props
Another idea - whether it is useful, however, is questionable :-D The virus must, if you want to print it, necessarily printed with supports! In my profile you will find a few other ideas or small gifts that you can easily print. As a…
If you, like me, like both heavy metal music and space stuff then this model is for you! It was designed for use with an 8 cm diameter snow globe. If you don't have one of those I also include a snow globe dummy you can print and put as a…
Easy to make Astronaut keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Coronal brain matrices for 40-75g mouse brains 2024.04.19 - Added a version with increased slot sizes Print instructions PLA, 0.25 mm nozzle, 0.1 mm layer height --- If you'd like to support my work https://www.buymeacoffee.com/bitn
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This chibi astronaut model shows a confident space…
Scale to 10% for very tight fit. 11.5% or 12% for a loose but snug fit. Bic Buddies are great companions for smokers and non smokers of all walks of life. I have a lot more Buddies to post! I haven't printed this one yet; post your makes!
Supports: On Buildplate adhesion: Brim Prints standing up, leave the brim on for an easy stand. The model will stand on it's own without a base but it is unstable.
This is a filament painting of an astronaut floating through space. It was made by using Midjourney. Printed at 240x114 @ 1.92mm I have also added a thicker version for those that want a sturdier print. 240x114 @ 3.12mm Print at 100%…
The armrest in current Seat Arona and Seat Ibiza cars is very low and slanted downwards, making it uncomfortable for some people to rest their arm on. This riser is designed to fit perfectly on the front edge of the compartment under the…
als Star Wars Fan musste ich diese Figur hier allen zugänglich machen
Easy to make a cute Astronau Dog keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
A new 3D figurine generated by AI, a Little Astronaut On The Moon. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…
Wireframe Apollo Astronaut Support Free Remix Subscribe Now! Remix to support free and printed. Wireframe Version: Solid Version here https://www.thingiverse.com/thing:4615496 : Category: Sculptures
Place a paper label in this label holder for Ikea Dröna storage box for the Kallax series
I spent lots a time working on this and would really appreciate a download! Please follow on https://www.tiktok.com/@aedify4 Thanks!!😀
NASA ASTRONAUT WITH MMU (Manned Maneuvering Unit) Artist website: http://www.grueter.com Other 3D Objects: https://www.shapeways.com/shops/grueter Custom Section Category: Art
print 2x the side and 3x the pins to be able to print without needing supports. I just used super glue to combine the parts. I have also included the tool as a single model, as that was how I first made it
Da ich die Beleuchtung schon hatte und keine für mich passenden Aufnahmen gefunden habe, habe ich diese selber erstellt. Ich habe Sie in PETG gedruckt Den Halter am besten so auf dem Druckbett plazieren wie auf dem Foto Die Kamera wird…
Diviértete con este modelo inspirado en el día de muertos, puedes usarlo en tu disfraz de catrina. -No se necesitan soportes
You can print the rocket with or without supports but the figure needs support.
This astronaut model is designed for easy, support‑free printing and simple assembly. The body prints as one solid piece, including the hands and shoes — flip it upside down when slicing if you want those parts in a different filament…
Design Concept The Ronaldo Jersey Keychain is inspired by the iconic football jersey, crafted for fans who wish to carry a piece of their passion wherever they go. Use This keychain serves as a perfect accessory for a football enthusiast,…
Attach the rope and your astronaut is ready to swing ! Print Settings Rafts: Yes Supports: Yes Notes: I premade two versions, for FDM 3Dprinter and resin 3Dprinter (Hollow) printing... Custom Section Category: Art
Design Concept The Cute Astronaut Deejay figurine features a charming design that merges the intriguing universe of space exploration with the contemporary world of music. The stylized astronaut figure is poised over turntables, casting a…
Available for free is the latest 50/50 astronaut & skull twist fidgets with the full skull & full helmet available to all subscribers or on any online store The skull is made using separate subtools making it super easy to paint and…
Key points 1 Uses household tissues as the filter. 2 Large filter area. This reduces the flow rate per area and allows more layers (12 – 16) to be used, thus increasing filtration efficiency. 3 Comfortable because the only thing against…
This is an adapter to use this holder which was modified for the Winmau ring also with a “Target Darts Corona” ring. This requires a different holder but can be combined with these very stable feet. I print it in ASA and PLA is the same…
