Counting matching models…
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…
The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer
This was totally based on these nice and well machined rotating dice: To make one, you'll need: 4 small bearings (3x10x4 mm) lke these ones: https://www.amazon.com/Fishing-Shielded-Miniature-Bearings-VXB/dp/B002BBF59C (Not sponsorship) 14…
All design credit goes to ZekeAsakura https://www.thingiverse.com/thing:2900552 I remixed it as follows: Reduced the diameter to +/- 40mm Trimmed the height to +/- 10mm Recessed a small hole to make it easier to glue in a 8mmx3mm magnet…
This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !
This model can show both a radial engine (rotating crankshaft with a stationary body) and a rotary engine (stationary crankshaft with a rotating body).
Heavily inspired by all the different rotation indicators flying around. Very thin and lean version. I primarily did this to have something fitting to the magnets that are flying around in the office and to test the variants feature of my…
Make a motorized rotating display stage with your printer + off the shelf hardware. I printed this in ABS and tested it to about 190 lbs! Affiliate Amazon links for the parts I used: - 8 inch ball-bearing lazy Susan:…
With this rotary stacking container you can store small things - bolts and nuts for example. If you do not need the boxes, you can store them space saving. On both narrow sides of the container you can attach a label. There are some…
This is a spare part to safe my father in law's old rotary style telephone. The picture shows a prototype printed in PETG, which was not perfect, but the files uploaded here fit perfectly well and all the numbers are centered. It should…
Knob for rotary encoder or potentiometer with 6mm shaft.
Print as you wish. I didn't make the knob empty inside because I wanted to make it more sturdy for PLA.
The link to the video of the assembled lamp and all the necessary information about the print settings and accessories can be found in the links below. video: Lamp Lithophane (youtube.com) led belt: LED pásky napájené přes USB pro…
The subtle movements of the z-axis can be hard to see, it is usually less than a millimeter during moves. The rotation of the z-axis is usually bigger, but even that is hard to see. This thing adds an indicator making the rotation more…
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
I found the rotating rings fidget very satisfying when I scaled it up to 150%. Then I figured simple scaling could affected the gap making the toy too loose. So I decided to make a FreeCAD version for everyone to find their preferred…
This is a simple tool clamp that allows the rotary tool to be mounted in a vise for hands-free operation. There is also an 25mm square accessory block which can be used on the opposite end of a wood vise to prevent racking if desired (see…
Simple Rotatable towel hooks, could be fixed with simple nails or screws, no supports required
I love how relaxed I feel whenever I spin my fidget. Then it hit me — why not make something dance around while it spins? So here’s what I came up with: a remix model with dancing foxes that twirl as you spin! 🦊💃 The model is separated…
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
This filament guide is a remix to add a threaded end for a bowden connector
Praktický do kanceláře - Practical for the office
With this tool, de-icing windows becomes a real adventure. Thanks to the handle, the "Rotating Scraper" can be held easily and stably, and the blades can be rotated with the other hand. This means de-icing in the early morning is finally…
Desk Fan Rotator These two parts form a rotating platform. I specifically designed it for use with the Gaiatop USB Desk Fan as its built-in swivel capabilities were too limited for my use. Additionally the extra space was useful for…
CZ: (EN version follows) Do školy jsme koupili sadu Vernier - Aparatura pro studium rotačního pohybu (GDX-CFA) . K dokonalosti jí chyběla možnost někam uložit nepoužívaná závaží. Trojúhelníková základna obsahuje předvrtané otvory, které…
This is a pretty nice rotating rings toy which is perfect to use as a fidget toy in almost every situation. :) If you are not able to get the rings rotating freely, you can use the "looser-tolerances" version. If needed I can upload outer…
I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…
Egg dispenser. Add model for bed 256x256x256 type bambu. 3110_Bambu dispenser eggs.3mf New model with solution break eggs https://www.printables.com/model/1223603-2025_dispenser-rotary-egg New model 2025…
The Wankel rotary engine is marvel of modern engineering, and now you can experience the wondrous complexity of it's mechanical operation in the palm of your hand! The assembly consists of three pieces, all lightweight and easy to print.…
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
This 2-digit counter boasts a stylish design! It features a wheel with a satisfying click. Each number comes to a stop with a click. and easy snap on assembly. Assembly: 0. print a total of 5 parts: ‘Case_M’, ‘Case_F’, ‘Spring’,…
Tired of untangling a web of wires every time you need to charge your devices or connect peripherals? Say hello to the solution that will revolutionize your cable management – The Ultimate Portable Rotatable Data Cable Organizer Storage…
Labubu Mini - This model is shrunken down to 2/3rds of the original size. Plus I added the option for a keychain. The body can be printed without any supports. I did add a brim to make sure it doesn't tip while printing. Options include…
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
Found this on Makerworld but it is no longer there so enjoy! Design Concept The Bubu figure is an adorable creature characterized by large enigmatic eyes that rotate, lending an interactive element to the design. The whimsical fur texture…
Battery Missle Launcher for AAA and AA batteries This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking…
Gently snap the caliper onto the disc.
UPDATE: I added a new profile with a top piece with a label on it where you can put your price or name on it. You can edit it in Bambu studio. Just put some text to it. I made this rotating keychain display. It's very sturdy and requiers…
How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…
You can find the openscad code here: https://github.com/diademiemi/openscad_fidget_toys This can be printed in it's default orientation in-place, no supports
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…
Improved version of my brake disc keychain, featuring enhanced fit and refined details for a more realistic look. Use a small amount of force to snap it into place.
Check out other Christmas models:
I designed a 3D-printed version of a spinning skein holder. The spindle is held captive by a small keyed shaft pressed into a 608 bearing. Print Settings: 0.4mm nozzle 0.2mm layer height Supports only on spindle and spindle peg 15-20%…
New helical model without supports. Helicoidal eggs dispenser approx 15 units of XL size, maybe 16/18 of other sizes. Optimized model to do it without supports and redesigned (recommended) A model with supports is also left, but it is…
A simple cover for the SAGROTAN soap dispenser. By the way, you can find a shelf for wall mounting in my 3D models . IMPORTANT: YOU ARE NOT ALLOWED TO USE MY DATA FOR COMMERCIAL PURPOSE (E.G. for your ETSY or EBAY) WITHOUT MY CONCENT.…
This is a new addition to my Paralane design… the Paralane Desk Organizer. This organizer comes in three different sizes to fit most desktop situations. You can store large or small items you need within reach. And it rotates!! Don't have…
T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for M3 nut. There's also a version that fits to #4-40 x 3/16'' nut: https://www.thingiverse.com/thing:3366563 Fits for most of…
The source marked this model as adult content.
A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.
2023 Stackable rotary drink dispenser, improved from model 2022. which takes the same geometry, but improving aspects, gained 6 mm in height to fit better in your fridge, increased 2 mm in width to reinforce the height floors.…
Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…
To rotate the turret, gently twist the turret after printing to break the connection. Two turret designs. It can be printed without support as in normal Benchy. Category: 3D Printer Accessories
This cylindrical tackle box features five individual compartments accessible by rotating the box. Ideal for organizing fishing hooks and other small items. I recommend to print it in PETG. Assembly Take the "Clicky Thing" and insert it…
Intro This is an ergoniomic bit tool with a nice textured handle and rotating end piece ! Try it, you will really enjoy working with it! Why you'll love it? Suitable for all HEX bits Very small but still a super grip for all your work…
Nintendo switch rotating game case made on a 3D printer! This design is flashy and will impress your friends while providing great functionality! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
This is a different interpretation of the rotating ring toy by Marvin. There is 3 models, each with different tolerence. (0.2, 0.15, 0.1) Comes with a base to display the toy.
This rotating colander is a practical tool for rinsing and draining fruits or vegetables, designed for easy 3D printing. The file is ready to download so you can print it yourself and add a useful piece to your kitchen.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
New model redesigned on the original one with a robust upper part, new blade to avoid breakage in the curve acting as a brake (previous slow-down eliminated) and redesigned anti-fall piece. Split models with improved connection between…
2024 - New geometry of the beverage dispenser, modified shape of the upper can inlet, beams and more stylized shape. Compatible with previous model 2023. https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser…
Play with the kids! Rotadraw is a retro drawing toy, where the children as young as 4 years old can participate. Rotadraw reinvented with 3d printing. Attach a disc to a piece of paper using the pushpin. Mark the dot on the paper next to…
Lots of files! You'll most likely want to print something similar to this: 1× Slim_Packout_Long_Cutout_Bin_for_Milwaukee_bit_holders (This goes on top) 1× Intermediate-Bin (This goes on the bottom) Various bit holders: 4×…
After learning about the rotation indicators for the extruder motor, I loved the idea, but I didn't really like any of the designs I was seeing. I wanted a gear/cog but couldn't find any I liked. So I made my own, I just wanted one but…
Declutter your countertop with this Rotating Coffee Pod Holder ! Designed to store multiple coffee capsules in an elegant, space-saving manner, this holder ensures easy access to your favorite brews. The rotating feature makes selecting a…
Warning: this mod is experimental and needs engineering and mechanical background to build. No guarantee and very little support provided by me. This is a modification you can add to your MK3s to be able to print 90° overhangs without…
These are a couple of gyroscope fidget toys I designed and after playing with/testing them I think they are ready to share! Both the disk and cog at 100% are about 80mm in diameter and 24mm tall. 0.4 or 0.6 nozzle, No supports, 3…
Hardware you need: 8 M3 X 25 mm bolts and 6 nuts 3 X skate roller bearing (608 size) Friction is low! limited to gears and bearings, also fluids unless you move to space. Connector dimensions provided so please design more tools! FAN TOOL…
This is my design of rotating display table. It is quite useful if you want to make your recordings of stationary objects more interesting to watch. Overall this design works pretty well and I have already made a lot of nice shots with…
Collapsible / Rotatable Clothes Hanger (Print in Place) This collapsible / rotatable clothes hanger weighs little, is easy to store and is perfect for on the go. The rotation locks into the open and closed positions with a loose fit. If…
The Hadley telescope by Maff is a great design that allows makers for an easy and cheap introduction to astronomy. There are lots of difficulties when using a telescope for the first time, for me one of them was trying to take a picture…
https://www.youtube.com/watch?v=fv14fDUk0uI - tutorial
Peep sight rotation can be very annoying and time consuming to fix. One solution is to twist the bow string to perfectly align peep but it requires to have a bow press. One other, fast and easy solution is to use this little tool, that…
Please leave a like and download this was very very hard to make!! best printed with color changing or silk PLA, i do not know why!?! check out my buddy bobtherunner123 https://www.printables.com/@Bobtherunner_1996757
A design for a lamp i made. Also made some for some friends who liked it very much. Designed and printed by https://www.mtb3d.com/
Please don't forget to like - I want my Prusameters! 😄 ###################################### I love good tools, but got a little bit mad with using my nice caliper for calibrating e-steps / rotation distance, because I got inconsistent…
NOTE: Please honor and adhere to the license of these models. Commercial use is prohibited and not allowed. Three router attachments for Dremel rotary tool, with different stabilizer bases. These models were inspired by the design on…
I remodeled the rotating platform of Rudniol ( https://www.thingiverse.com/thing:3278530 ) for better usability. The platform has a diameter of 15 cm. I eliminated the space between bottom and top part of the platform in order to minimize…
A strong clamping vise that is setup with a rotating and tilting ball joint, allowing you to securely hold objects up to 11 cm wide at the perfect angle. The jaw faces are setup to be interchangeable, and the hollow base has a threaded…
Keychain with Letter where the inner part can freely rotate. Print instructions Make sure to first tune your filament in. I found this to be very effective: https://www.thingiverse.com/thing:1622868 It also helps to find any differences…
A great print for Valentine's Day! The uploaded models of the bracelet have two sizes: 6 links (approximately 190 mm, 7.5") 7 links (approximately 215 mm, 8.5") You can remix the model to add more links or change the heart to a different…
Rotary tool organisation for the tools and all the accessories. An easy way to organise all of your rotary tools items. Easy to print, easy to use. Printet in PLA with 20% infill. 0.4 nozzle. 0.2 layer height. and 3 line vertical shell.…
The existing spool holder of the ender 3 V3 SE added to the shaking of the Z-axis to reduce shaking and enable better filament supply by rotating the direction of the spool holder 90 degrees. material 1. M5 nuts x 2 2. M5 x 15mm = 1, M5 x…
A new version with a different thread and some fixes. If the outer diameter of your outlet is 12.2mm (the part without the thread) this should work. Do not use much pressure on the bag, First gently squeeze the container to get some air…
I loved the idea of the extruder rotation indicator so I decided to design some more! It works exactly the same as the other designs - you'll need to glue a 8 x 3mm neodymium magnet to the 3D printed part so that it attaches to the motor…
I made this storage solution for the “ Ergonomic Workshop Aids " contest and it adds more storage for the smaller things you are working with without taking up too much space. You can pull it towards you when you need it, and when you're…
This fidget toy is fully Print in place and does not need any assembly. Perfect to test your printer or just as a fidget on your desk. If you turn the second square really fast you can even see a gyroscopic effect. The “Low tolerance”…
Preface I bought a Shop-Vac and Cyclone Dust separator a while ago; The Vacuum came with a 40mm hose, which is just not the best choice for a semi-static dust collector installation. I ordered a 60mm hose and had to solve the problem of…
D-Shaft Knob for Potentiometer/Rotary Encoder. Please remember to press Like if you download.
Circular Joint After searching the internet for some time, I could not find a circular joint that was simple and that would work for what I needed. So I decided to make my own using Autodesk inventor. Also, there is a test fit cylinder(In…
🇬🇧 Rotating Keychain Stand – 3D Printable Organizer This rotating stand is a practical and stylish solution for organizing and displaying keychains, tags, or small collectibles. Its compact design fits easily on a desk or shelf while…
Remix of Rotating Rings Toy where I added some hexagonal holes converging towards the center of the model to add some character and give some texture to the rings making them a more tantalizing tactile experience. Created fresh model in…
Note, I accidentally generated these with the hex grid rotated, meaning the flat top was facing up. This might be harder to print as the grid will require bridging, but it does use a little less filament and prints a little faster. Some…
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
Mechanical Movement 123 What is it? -This is a device that is designed to turn rotary motion into linear motion. It does this by having to drive gears engage with the rack at opposite times, in turn pulling the rack back and forth. The…
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Very simple and easy refill-adapter for Sagrotan/Dettol NoTouch soap. no drilling or adding parts to the container needed – the soap container stays unchanged. Simply install the Adapter to the refill bag. It fits the 12,3 mm thread of…
