Counting matching models…
I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…
Print approx. €6.55–€8.01 excl. taxPreliminary estimate for one variant
Rotary tool organisation for the tools and all the accessories. An easy way to organise all of your rotary tools items. Easy to print, easy to use. Printet in PLA with 20% infill. 0.4 nozzle. 0.2 layer height. and 3 line vertical shell.…
Print approx. €10.05–€12.29 excl. taxPreliminary estimate for one variant
Motivation The xTool RA2 rotary is a great accessory, but it can be challenging to square the workpiece up to the RA2 rotation axis. Solution Design and print a fence to achieve the following objectives: Allow workpiece to be held square…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Knob for rotary encoder or potentiometer with 6mm shaft.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Enclosure3D es un controlador de ambiente para impresoras 3D. El dispositivo regula tanto la temperatura como la humedad del espacio en donde se encuentra la impresora. Se controla mediante un rotary encoder y este es la perilla que…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Maybe the local pizza place forgot to cut your pie before delivery. Maybe you are just ready to roll out and cut some perfectly rectangular beignets. Here is the tool for the job. My work is all free forever. If you want to support my…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Knob for EC11 rotary encoder. Designed for a standard 6mm shaft, with a 20mm height. (The 20mm dimension is the most common). This is a variant of the Drippy shifter knob, which is a variant of the drippy bucket. I removed some of the…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Egg dispenser. Add model for bed 256x256x256 type bambu. 3110_Bambu dispenser eggs.3mf New model with solution break eggs https://www.printables.com/model/1223603-2025_dispenser-rotary-egg New model 2025…
The Wankel rotary engine is marvel of modern engineering, and now you can experience the wondrous complexity of it's mechanical operation in the palm of your hand! The assembly consists of three pieces, all lightweight and easy to print.…
New helical model without supports. Helicoidal eggs dispenser approx 15 units of XL size, maybe 16/18 of other sizes. Optimized model to do it without supports and redesigned (recommended) A model with supports is also left, but it is…
2023 Stackable rotary drink dispenser, improved from model 2022. which takes the same geometry, but improving aspects, gained 6 mm in height to fit better in your fridge, increased 2 mm in width to reinforce the height floors.…
Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…
This is a different interpretation of the rotating ring toy by Marvin. There is 3 models, each with different tolerence. (0.2, 0.15, 0.1) Comes with a base to display the toy.
New model redesigned on the original one with a robust upper part, new blade to avoid breakage in the curve acting as a brake (previous slow-down eliminated) and redesigned anti-fall piece. Split models with improved connection between…
2024 - New geometry of the beverage dispenser, modified shape of the upper can inlet, beams and more stylized shape. Compatible with previous model 2023. https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser…
Lots of files! You'll most likely want to print something similar to this: 1× Slim_Packout_Long_Cutout_Bin_for_Milwaukee_bit_holders (This goes on top) 1× Intermediate-Bin (This goes on the bottom) Various bit holders: 4×…
NOTE: Please honor and adhere to the license of these models. Commercial use is prohibited and not allowed. Three router attachments for Dremel rotary tool, with different stabilizer bases. These models were inspired by the design on…
D-Shaft Knob for Potentiometer/Rotary Encoder. Please remember to press Like if you download.
This is an adaptation to work with my specific rotary encoders. Inner diameter is 6mm and 11mm. The encoders I used are 5.95mm in diameter so dial in your horizontal expansion settings. Encoders:…
Motivation The xTool RA2 rotary is a great accessory, but the included chuck jaws have a few shortcomings: Workpieces with shallow stepped inside geometry (lip) are difficult to get a good and even grip especially when tapered Outside…
Egg fridge rack, 3 shelves. I adapted the dimensions to my fridge and the height of my shelves: the total height of the model is 180 mm, length 278 mm, width 72 mm. The rack is very stable and strong. The shelves are designed with a slope…
Update 8/9/22: Added STEP files for anyone who would like to more easily modify the design. I liked the original but I found that it would bind up occasionally. I thought a bearing would help keep it smooth. I have a ton of 608 bearings…
Ender-3 V2 & Voxelab Aquila - Winged Rotary Knob Ender-3 V2 Voxelab Aquila Also fits these printers: Artillery Hornet Creality CR-10 Inner Diameter ( 5.880 mm ) Enjoy! Follow Me: Website: https://www.e-studios.eu/ Instagram:…
This model can show both a radial engine (rotating crankshaft with a stationary body) and a rotary engine (stationary crankshaft with a rotating body).
Screw this puppy onto your dremel, adjust your bit depth, and route away to your heart's content. I liked the attachments that Cooch made in http://www.thingiverse.com/thing:5819 but wanted something that would screw firmly to the dremel.…
Flip-it! is a 3d printed flipbook that continually flips through pages by turning a lever. This kind of device also goes by the names Retroscope, Giphoscope, Flipbookit, and Mutoscope. The animation comes from the game "Cuphead". You will…
Rotary Photo Album The Rotary Photo Album is designed to store Instax Mini Photos. Turning the device simultaneously lowers pictures while raising new ones. Prints I printed this on my Bambu P1S. I tested that the top and bottom could be…
Totally customized organizer with slots for disc sizes 38, 33, 26, 23, 21, 17mm. For use with Milwaukee 48-22-8436 PACKOUT Low-Profile Compact Organizer. The discs are set at a height such that they will not fall out of the holder during…
Rotary encoder knob, diameter 20 mm, optimized for KY-040
I designed this simple storage unit for my rotary tool bits based on the Gridfinity system by Zack Freedman.
A tumbler machine to smoothen 3D prints. Works best with prints which are coated with filler or are printed with metal filament (Color Fabb copperFill). As abrasive medium brass bolts are used. M5 bolts and nuts secure housing and…
I've been a big rotary fan for a while, so I loved this model immediately. I did agree with a few people that had made it however that it would be better if the finger hole were larger, and if it didn't fall apart, so I spent a few…
2023 NEW.: Added threaded hole at the tips to mount m4 setscrews, to hold rings etc for fiber engravers. Do you own a 80mm chuck-style rotary for your laser-engraver machine? Then you need these special designed jaws for grapping big…
!!!Tell me what styles you like the most!!!
Grass Protection Ring for Rotary Sprinkler Head Prevents Grass from growing over your sprinkler head by doubling the ring around it. Features Promotes smooth operation of your rotary head. Extends down to the earth to prevent lifting…
Print at 0.2 mm layer height.
Print twice off here. One is huge and loose, the other is works okay but a tad too deep for the switch to trigger correctly. So took the chance to design my own while learning how to knurl with Fusion360. I hollowed out the center a bit…
This is a knob for the cheap rotary encoders (eg KY-040) with 6mm diameter, D shaped. Depending on your printer, settings, tolerances etc you can add a drop of hot glue for better fixation. The cross on the bottom is to help with bed…
7 cylinder old plane engine Looks really nice on a wall or within a frame. (mounting hole on the back). Engine is around 15 cm wide. Each propeller blade is 17 cm long. > Assembly details Engine “ blade ” has to be printed 3 times “ Blade…
Edit 30-Aug-2024: Corrected: No 15 Disp and Number were misaligned. Sorry. Edit 30-Jun-2024: improved magnet size gauge here : https://www.printables.com/de/model/928666-tolerance-compensating-magnet-gauge-for-neodym-dis Edit 23-Jun-2024:…
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
a quick clean wallmounted 2d model of rx7 for car-guys, if you like this model, id like to see your make, happy printing! (i advise to clean your printbed before so it does not come off, also rise the bed temps up a bit and slow the…
Laser Engraver Rotary Riser/Stabilizer 2 Options Available: (3D Printed or Laser Cut) 3D Printed Version: Printed in PLA+ I used a .6mm Nozzle, however you can use a .4mm as well With a .6mm Nozzle 2 Outer Walls. With a .4mm Nozzle 3…
Lower rotary know for (tr)uSDX. Requires to saw off rotary shaft. 2mm of D-shaped shaft should remain. See this youtube Video, how I did it:
This is a wall mountable rack for the 160W HobbyKing Rotary Tool and the tool set, but may fit other rotary tools also like a classic Dremel. The lower shelf is for the cutting disks and the polishing paste. On the left side there is a…
he design is simple and for this project you need this things : Hardware parts: 1-All .STL file need to be printed 2-Nema motor 17 3-CNC shield v3 Board 4- Arduino Uno 5- One DRV8825 Driver 6- 12V power supply 7- four ball bearing (I…
3D Printed Weber Moonraker WDT Tool Tested model, works good. Printed at 0.2mm Quality on Prusa MK3S with PLA 10% infill adaptive cubic. The STL's include two options for the base, one for porta filter ears, and one that indexes into the…
Summary This fits rotary encoders with knurled-type shafts. My Voron v0.1 screen didn't have the standard notched type of shaft, so I made this knob for it. I think it fits the Voron aesthetic well. It's wide and low profile, so that…
I needed to cut some copper rods for a Yagi antenna I'm building. I found GreaseMonkey88's nice design and adapted it for my RYOBI rotary tool and IRWIN clamps. I need to make an arm that fits my RYOBI flexible Rotary Tool head. It's a…
Leg locators for Elegoo phecda laser to give defined location, also height adjustment using 2mm pins, allows you to leave the additional risers fitted if used with honeycomb corner locators. Corner location for honeycomb bed again with…
Universal Rotary Tool Organizer Case – 3D Printable Storage Box for Rotary Tool and Accessories This case is designed for storing your rotary tool and organizing its accessories efficiently. It is a universal model that can fit multiple…
This original rotary engine keychain is a working model of a real mazda rotary.
NOTE: The printable part that are mounted to the sculpfun frame ( 2020 extrusion profile ) here are designed to fit to the “coats” around the original legs of a sculpfun laser. For the coats pls refer to one of my other models ! ( The…
This is a knurled rotary encoder knob with a 38 mm diameter and 13.4 mm height. Interior chamfered edges add strength without too much excess material. I created this for a specific project I'm working on, but it should be useful for…
Simple housing case with Snap-fit for KY-040 or similar Rotary Encoder. It has a hole in a cover for easy mounting under a desk or anywhere else with a screw. Easy access to the 5-pin DuPont connector. KY-040 Rotary Encoder Module Spacing…
Been working on pint beer glasses lately and needed something to level the work area. Just a simple wedge. Printed in tpu to try to keep it from sliding around.
4 way intersection for Brio and Ikea LILLABO wooden train. Print-in-Place to make the intersection rotatable. Print settings: 0.2mm layer height slow down bridges and turn on fan (100%) PLA/PETG All credits go to LocoRico for that great…
This is a basic fidget clicker designed to be print-in-place. Print the model using 0.2mm layers with 0%-15% infill. No supports or bed adhesion required. Simply wiggle the wheel free after printing and spin the wheel with your thumb. The…
One of the biggest headaches in laser engraving tumblers using a chuck rotary is getting the cup on the chuck precisely lined up. “Frustrating” is just the beginning. Expensive if you mess up either by being off center or you clamp too…
This is my rotary tool (dremel) 50mm sanding pad. I have used M4 screw+hex nut. Print Settings Printer: Creality CR-10 Rafts: No Supports: Yes Resolution: 0.1 Infill: 20-40% Category: Parts
I remixed the original “ Airbrush rotary disk - Prusament spool reuse”. Changes I made: better tollerances, so it fit all over easier together. a small lipp to stop the bearing to slide all the way through I removed the top lipp, so it…
For use with CTS 288 Rotary knobs with and without button press. The Rotary knobs with button press are MUCH more durable than those without. The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm…
Have you ever stared at your clumsy meat mittens and thought, "you know, what I need here is a thicc rotary encoder knob". Yeah, probably not, but I did and made a couple that came pretty close to what I was looking for. These will clear…
Version 1: Erhöhung um 26,4 mm, z.B. für einen xTool M1 Ultra Version 2: Erhöhung um 46,4 mm, z.B. für “meinen” xTool S1, allerdings habe ich keine Standarderhöhung ACHTUNG !!! Ich empfehle unbedingt vor dem Ausdruck die individuellen…
Initially designed for counting number of cups of water consumed, it can be adapted to count various things for games or in general. It features 11 positions which 'click' in place with a simple compliance mechanism. This is a two body…
A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…
This is a fully functional low profile wheel-style rotary axis for Laser Engravers/Cutters. There are a few purchased parts, but most of the interesting stuff is 3D printed. The motor is a standard NEMA17, I plug-replace my Y-Axis motor…
Ich habe hier mal ein Drehknopf für das Fanatec McLaren GT3 Lenkrad konstruiert um die Knöpfe farblich verändern zu können ————————————————————----------------------------------------------------------- I designed a rotary knob for the…
This mod replaces the default rotary knob with a winged one so it is possible to rotate with only one finger which is faster. Made a version with shorter wings so it hides the screen a bit less. Remix from Chrizz on Thingiverse :…
just something different for the ram 1500 rotary knob using a revolver cylinder not for use with pla due to heat in vehicle
Added a tab to to the Rotary.stl to mount the filament sensor to the guide.
This is an Encoder knob for an EC11 rotary encoder with a shaft length of 10mm. Parametric Fusion360 Files are available
Usage instructions: Github repository : https://github.com/gcr/balatro-slide-rule Plotting code : On Marimo I designed and 3D-printed slide rule calculator for Balatro! It can quickly multiply and divide numbers to help you calculate your…
Compatible with M3*8 screws with a spring washer and washer. Uses M3 screws for every hole I printed mine without supports or rafts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter…
A motorized turntable for various applications, like 360° videos,… super easy to assemble (only 3 parts) and perfect for a first small electronics project. . After uploading a small washing machine, I realized that I didn't have any good…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed “Bambu Lab A1 Mini - Rotary Spool Holder Adpater” for the original product Bambu Lab Rotary…
Replica of the HW-040 Rotary Encoder. The model is based exclusively on measurements taken from the one I have in possesion. For compatibiliy please check the module dimensions. File format: STEP Buy it here! : https://amzn.to/4nO8hpF
I wanted something with grip and that would allow fine control of an encoder as well as being easy to push. I made this specifically for this rotary encoder and some other similar ones ( PEC12R-4225F-S0024). However, it seems to fit a lot…
Installation steps (see images): Remove the rail end (two screews, pink wrench). Move the rail with module two slots back on the platform (green wrench). Slide in the extension piece. Secure it in place with M4x14 screews (same as the…
Ich habe verschiedene Arten an Spannbacken für das Rotary RA2 von XTool. Durch die unterschiedlichen Spannbacken kann ich unterschiedliche Teile besser Spannen. Nr. Höhe Spannteil Gesamtlänge 1 7 mm 39 mm 2 8 mm 29 mm 3 20 mm 29 mm 4 7 mm…
I needed a replacement but all versions I found wasn't the real form factor I needed and that's why I created my own. There are 2 versions: knob_full.stl full knob for printing in one color knob_mc_base.stl knob_mc_indicator.stl…
~43mm clamp adapter for rotary tools with a Dremel style thread. A new design based on the Drill Press - Rotary Tool Adapter from @AddictiveManu_272921 . I printed with ABS, 4 perimeters and 15% infill with the flange side down.
Mount and shaft extender for rotary switch, now with PCB for LEDs. Base printed in Black PLA. Light Pipe Upper and Shaft Extender in transparent PETG. All printed with 100% infill for strength. Base and Upper are glued together and then…
Simple adapter to attach the parkside rotary tool to the parkside drill support. Because of the threads of the adapter, a layer height smaller than or equal to 0.15 mm is recomended. Also added a washer spacer to attach to the lever,…
Rotary Drawing Stencil - Twist Art The rotary drawing stencil is a fun toy that allows you to create line drawings step by step. Can you guess what picture it is hiding? Puzzel it together by following these steps: Place the stencil on a…
This is a remix from https://www.thingiverse.com/thing:4700294 Improvements: Wider width to clamp to a table. Additional shim to allow different table thicknesses. Add more shims as needed Use actual metal 5/16 bolts for stronger clamp…
M3 Hex Nuts 1x M3 T-Nuts x6 M3 Screw 8mm x8 M3 Screw 40mm x2 M5 Screw 20mm x1 M5 Bolt x1 M8 steel rod 220mm x2 2GT 20 Teeth 5mm Bore Aluminum Timing Pulley x1 2GT 20 Teeth 8mm Bore Aluminum Timing Pulley x2 100mm Length 6mm Width 2GT Belt…
Gridfinity storage solutions for all the stuff that comes w/ the XTool RA2. There are two models here to hold the rollers, one with the baseplate/drive unit and one without. If you don't need storage for the baseplate, you can save…
Parts needed to raise your Creality Rotary Kit Pro 15mm to allow tumblers and cups with handles to move freely around laser. Parts required: 4 Each of M4 25mm long flathead screws. (I started with 40mm and cut them down to 35mm but have…
This is a fan that friction fits onto the collet nut of a Dremel/Craftsmen 395 rotary tool. It blows air over the bit to clear the dust from the cutting area so you can see better. I remixed the original design as I didn't like the…
Big shout out to hotbrass for the original design! Remixed this with a center hole to use with the 45 degree adapter for my Kayak. ( https://www.thingiverse.com/thing:4780591 ) Printed in PETG. I did not have flexible filament so I…
UPDATE: 3/1/2024 - ver. 1.1 I added additional pictures and explanation, below, to try and clarify the assembly process. UPDATE: 5/12/2023 - ver. 1.1 I have added a worm and worm gear set for finer rotation control. The FINE version of…
A carousel to organize all the Vertuo pods for Nespresso. Uses threaded shafts allowing shafts and discs to be joined to create multiple levels. To create a four-level carousel, as shown in the picture, print the following components -…
Sturdy wall mount for the Dewalt DCH273B SDS Rotary Hammer Drill. Built in spacer. Use the spacer to level and install 2 screws. Easy to print. Also is said to work with Makita Hammer Drill DHR171
Jednoduchá rotační základna pro barvící stanice. Easy to print base for paint station. Print instructions Jako první vezměte přírubu ze špulky od Průšamentu a odstraňte z ní kruh držící papírovou špulku. Do modelu paint-station-1 vložte…
Looking for a bit holder, I liked many of them but did not find one that had exactly what I needed or that was easy to modify. So here is the one I made with FreeCAD. I was planning for a really nice modular and parametric model in…
Inspired by my Yakattack rotogrip paddle holder, I designed up my own printable version. This in no way replaces the absolutely bulletproof gear from Yakattack, but it was a way for me to store my paddles on my kayak storage rack. I…
Tired of finding the correct angle for your rotary tool? This small part will help to raise the rotary tool plate to the desired angle. It fits into the center hole/gap of the base. Printed with PLA with 0,2 layer height without having…
