Counting matching models…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
We are currently building two armies for playing OnePageRules: Age of Fantasy. There are a lot of models available. However, I wasn't able to find fitting proxies for everything. So, this is my take on the 'Ghost Swarms'. Six small ghosts…
PLA Settings that prove to work: *0.2mm layer height *20-25% infill (cubic or gyroid) *3 walls/perimeters for strength and visual appearance (not necessary, just suggested) This is designed to print without supports. Pairs best with the…
An alternative proxy marine design for the community. I wanted to create something a bit more modular, and down the road I'll produce more front armor plates for alternative looks, such as a skull decoration or ammo pouch. Follow for more.
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Case for ESP32 board with external BT/wifi antenna I used as BT proxy from home assistant. Board I used is AZ-Delivery ESP-32 Dev Kit C V4. I re-purposed an ipad usb-c charger and micro usb cable. I'm sure there is a nicer and less…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Here's my proxy model for the Frosthaven summon, the Wraith! This could be used fairly well for the OG Gloomhaven monster, the Living Spirit, or even for any sort of wandering spirit in a DnD game =) The chains needed a ridiculous amount…
This simple stand is designed specifically for the Puffco Proxy vaporizer. It securely holds the Proxy while keeping it steady and upright, when not in use and on display. The stand is compatible with the stock Puffco Proxy glass,…
Here's my proxy model for Alienoid from the King of Tokyo board game! This guy was a real challenge to print because of those segmented tentacle leg things. I typically avoid using top connections when designing my supports, but they're…
Here's my proxy model for the Frosthaven monster, the Algox Icespeaker! This guy needs a fair amount of support, especially under the axes. Make sure that you also get his upper fangs and a bit of his right horn! As always, the .blend…
Here's my proxy model for Gigazaur from the board game, King of Tokyo! I had to separate the head to get it printed because of the teeth, so I included versions with the head attached and without. I put the model on a 50 mm base, which…
Hey everyone - here's my proxy model for Meka Dragon, from King of Tokyo! This guy is the sixth and final core kaiju from the game, so the set is finally complete! As always, the .blend file and any pre-supported .3mf (including the one…
There are a number of Stompa proxies out there but none of them had that 2nd Edition vibe, so I designed my own. It's very similar to the original but not an exact copy. Many thanks to reddit user Marcus_Machiavelli for measurements from…
Here's my proxy model for Space Penguin from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) As always, the .blend file and pre-supported .obj (the one…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Here's my proxy model for the Frosthaven boss, the Fish King! I was so happy with how the net worked out for the Herder that I figured that I should go ahead and include one here, too. Since capes look really cool on miniatures, I figured…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Here's my proxy model for Cyberkitty from King of Tokyo! I got to use a lot of the techno-greeble techniques that I learned for the Alienoid proxy, but really turn them up to 11 here, which was really fun =) Printing this model was a real…
1mm height recommended. I'm the best!
Here's my take on the Frosthaven monster, the Algox Snowspeaker! The artwork for this guy has him looming up like a genie from a swirl of snow, so I decided to really lean into that image with my model. I hope you enjoy it! As always, the…
Hey everyone - here's my model for the Frosthaven Algox boss! I'll avoid saying too much about the model in order to avoid any potential spoilers, but I just want to give some quick printing advice: make sure that there's some support…
Here's my proxy model for the Abael Herder! I included two versions of this model, one with a bone helmet that's a bit closer to the artwork, and one with a bandana. This model pretty much requires SLA or a 0.25mm nozzle (or smaller) for…
Here's my proxy model for The King from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) As always, the .blend file and pre-supported .obj (the one that…
Here's my model for the Frosthaven Boss, the Lord of Chaos! I made it as self-supporting as possible, but there's still several outstretched limbs that're gonna need supports. Fortunately, none of the “interior” of the model has overhangs…
Hey, this is a free Dreadnought Proxy. Supported files are not included.
Make way for the winner! This is a detailed, fan-art figurine of Roxanne Wolf (Roxy), the fierce and competitive wolf animatronic from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
12/20/2025 update: I've added a v2 of the model that should be easier to print. I've also increased the sizes of some of the details on the model to make them easier to paint. Here's my proxy model for the Frosthaven summon, the Skeleton…
Here's my model for the Frosthaven monster, the Lurker Soldier. Just as the artwork for the solider is a fresh iteration on the original Gloomhaven Lurker, I figured that it would be good to make my Solider model a fresh iteration on my…
Here's my proxy model for the Frosthaven Boss, the Prince of Frost! The artwork for this guys makes me think of just the fanciest Snow Imp that ever was, so I used the same basic model proportions for this guy as I did for my Snow Imps.…
This Radar Presence Sensor is easy to build and pretty cheap considering its performance. The firmware uses ESPHome . The sensor uses the universal ball-joint design so it can be oriented for accurate detection. I provide a skadis mount…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Hi everyone - here's my proxy model for the Frosthaven boss, the Seeker of the Abyss! There's a lot of Lurkers in this game, so I wanted to make sure that this guy was distinctive and easy to differentiate from the others. The artwork for…
There are two of these guys, so I figured that it would be fun to put together two different models. The howling one is really easy to print in the upright orientation, only needing a few support points under its body. The stalking pose…
Here's my proxy model for the Frosthaven boss, the Fracture of the Deep! I did my best to make it as self-supporting as possibl, but this guy still needs a fair amount of support. There's a lot of armor plates and spiky protrusions and…
Here's my proxy model for the Elder Ooze from Frosthaven! The artwork for this guy is toweringly high, but since it's still a single-hex monster, I tried to capture that sense of scale by covering it with various skeletal bits. If you…
Here's my proxy model for the Frosthaven boss, Orphan! This guy's a broken down, ancient machine that appears to have stitched itself back together from whatever parts it was able to find laying around, and it was a ton of fun to make! I…
This is the complete set of files for the Worldwide Slot Car Chat Proxy Race. Pods are designed to use 3/16 single flange bushings. I use these. Professor Motor PMTR1073 Low friction style oilite bushing - 3/32" ID x 3/16" OD flanged - 1…
I modeled up some of the warbosses wardrobe from the official mini picture and handed him one of my historic sword replicas. I especially enjoyed doing the frowny face axe. Love it. Many thanks to Carlbark for the original model and…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Here's my proxy model for Render! He's a big angry sasquatch looking critter with brown fur, big claws and terrible teeth… so here you go! As always, the .blend file and pre-supported .3mf (including the one that I used to print this on…
Here's my proxy model for the Frosthaven boss, the Collector! There's not a huge footprint on this guy, so if you're printing it directly on the bed, I'd recommend putting a support point or two on the “leg blast” so that it doesn't get…
Hi everyone - here's my proxy model for the Frosthaven Boss, the Program Director! Not too much to write about this one; it needs a fair amount of support because of all of those mechanical hard edges and protruding shapes, but it's…
Hi everyone - here's my proxy model for the Frosthaven Boss, the Relic! This model was a lot of fun to make; the first face of the cube was mostly re-creating the greebles that exist in the artwork, but after that it was open season on…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Didn't really see any models I liked for the Proxy on here so I decided to make this. I'll likely make more Proxy accessories in the future as I continue to find problems! Printed with Prusament Ultramarine Blue Transparent PETG, - .4mm…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Here's my proxy model for the Vestige of the Imprisoned God. This is one of the rare 3-hex monsters in Frosthaven, which was very helpful for me because the artwork is that giant limb, towering above the trees… which was really hard to…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Modeled figures for the board game Stuffed Fables, Stuffed Fables. Made in blender, taking as a model the images from the internet, so they are not scanned. more than 100 hours of work to give life to the game, or to replace any missing…
Replica con calidad screen acurate del jetpack del personaje de la saga galactica, esta diseñado para ser facil de imprimir y aun mas facil de montar y tansportar.
I wanted to change the color of the Proxy's new Core cup, so this goes over the existing cup and does not replace it like some other models. This was printed in TPU and has a hole in the bottom to make it easy to take on/off and also…
Good looking generic fantasy proxy tokens for many types of miniatures. Stackable, easily storable. Contains: Melee proxy figure, numbered 1-8 Ranged proxy figure, numbered 1-8 Spellcaster proxy figure, numbered 1-8 Mount proxy usable…
Make a tiny and powerful Bluetooth proxy for under 5 EUR! It can even double as a night lamp. This is a simple case for an ESP32-C3 supermini with an external glue-on antenna. Ideal as a Home assistant Bluetooth proxy. There's space for…
A cool idea I had for a Ghost Rider proxy! I remixed it from a pile of parts I found around on Thingiverse. Category: Games
Here's my proxy model for The King from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) obj model and stl, needs supports, I printed using 0.4mm nozzle…
Here's my proxy model for Pandakai from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) obj model and stl, needs supports, I printed using 0.4mm nozzle…
a short and simple anti tip base for the puffco proxy. keeps oem glass upright and prevents catastrophic tippage
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
These are compatible with the pup tags by @3dWorkBench - to make them compatible to my magnet remix of that set, print these at 75%. I have included the magnet remix frame. The shape of the shield and the shape of the bone in…
Took the body from the Ursus Claw by Atomschlumpf and quickly rigged up a bit to make a shock lance proxy. Category: Games
Also available on MakerWorld with a profile for Bambu printers. It is always a worry storing away a 41C: leave the batteries in and risk battery leakage, or, take them out and risk losing the cover. Now you can keep your HP-41C battery…
Description A set of proxy tokens for playing tabletop games, ie DnD, great for keeping on hand when you don't have a specific mini (or enough kobolds for when the party summons the whole dungeon!) Set of 6 numbered proxy tokens. Printed…
Current state The silhouette and tokens work - I just need to expand on the unit profile top tokens. But if you'd like you can easily do it yourself - check the How to modify section for more information. Why and the goal I've started…
I printed it by cuting it in half in the middle and printing the both parts flat, am including a version with and without flames.
Minimalist enclosure for ESP32 (ESP-WROOM) with wall mounting. Print with PETG / PLA 0.2 mm Minimalist enclosure for ESP32 (ESP-WROOM) with wall mounting. Print with PETG / PLA 0.2 mm
We wanted our little girl to be able to open specific doors in our house, by using the same handle system adults are using. This simple proxy handle will pull on the real handle when the kid use it, thanks to a piece of string attaching…
This is a simple pawn miniature proxy that can easily be printed on an FDM printer. It's got a 20mm base but you can easily scale it to different base sizes. The ones in the picture are the 20mm^2 as well as some that are scaled to 25x50…
A heavy grimdark battle tank with riveted armor plates, a long main turret cannon, track guards and side stowage packed with crates and gear. It works as a proxy for 28mm sci-fi wargames or as a weathering project for your shelf. One STL…
100x160mm sign, reading “Ban Hydroxylic Acid”. It's just awful stuff; over 80% of the people autopsied in the last 5 years have had detectable amounts in their bodies. Best with color switch above 1mm, as with included gcode file. Also…
V případě potřeby můžete změnit velikost v kráječi. @Grip se velmi dobře drží. Po roce používání se nic nerozbilo. Vytištěno z PETG na základní nastavení. Nepřidal jsem žádné obvody. Lepené univerzálním silným lepidlem.
Surface model of a stereospecific enzyme: 6-hydroxy-L-nicotine oxidase from Paenarrthrobacter nicotinovorans. The model was sliced in half in order to make the binding sites for FAD and substrates (6 hydroxy L- nicotine and 6 hydroxy D-…
Turn any Puffco Proxy pipe into a flower solar pipe. For the bowl I use Cocktail Smoke Filters. They are stainless steel mesh came in 20 pcs on amazon. 2" ring magnet of some sort if you can find them is what I did. The dome 2" acrylic…
This is Roxy Lalonde , the character from Homestuck in the traditional pose you see in pictures of her. My daughter loves Homestuck and I wasn't able to find any 3D character files, so I have slowly been creating her favourite characters.…
Things Used: (non affiliate!) ESP32_DEVKitc_V4 M2.6 Head Self Tapping Wood Screw Category: Gadgets
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bwSnOWcgFa3 Category: Biology
Bought a set, just getting into the heavy game, ended up with a lot of leftover plastic, figured I could create proxy gear elements with my knowledge of CAD so that I wouldn't have so much leftover plastic blitz. Maybe you have the same…
"Those whose eyes have met, and those whose eyes have not." "72 minutes." "Kill." 'Tis thou. Flee thee not, for the P-Prescript pointeth to thee/
Ersatzteil für COOCKOO Roxy Katzenspielzeug. Der Stick ist etwas länger. Mit PETG, 100% infill, Liegend gedruckt. Nach dem drucken den Stick mit dem Föhn erwärmen und leicht biegen.
This is an open backed case designed to fit over a generic 5W USB UK plug and houses an ESP32-WROOM-32U WROVER. The box is deliberately wide and has a cutout so it can sit over a UK 13A socket switch. I flashed mine with ESPHome bluetooth…
2026-04-19 Updated models to be thinner and designed a cache. Credit to Meaicon, Md Tanvirul Haque, Assetwave, Ilham Fitrotul Hayat, KP Arts, Freepik, and Kiranshastry for the symbols.
I often find myself short on Recruit tokens when playing Viktor, so I made and printed a few extra. :-P This is a simple proxy token card designed to make it easier to keep track of your Recruits during a game. Print settings: - No…
Orc Rocker compatible avec wh40k, idéal pour le wargaming et jeu de roles.
This is my take on a customizable geocaching Travel Bug trackable proxy, designed for easy personalization. The token features the Travel Bug logo with blank areas above and below, allowing you to fully customize it by adding text with…
This is a remix of Canvas 23 Studio's design but extends the top section for a longer ESP32 board.
Roxy the mischievous little puppy dog https://youtu.be/ZTk8QWFpSV8 YouTube video of 3d printing
The step flies would not load into Prusa Slicer in a way that allowed for easy printing, with my C1L. I used Orca Slicer, to bring up the tokens, and convert the icons to negative values, then export them as STL files. Prusa Slicer (PS)…
A simple holder for your Puffco Proxy. Works with stock glass and many custom cups, like my Magizle glass. If your glass doesn’t fit, please let me know. I may be able to adjust it or you can use the remix files. I printed this snap to…
8-Hydroxyquinoline (C9H7NO, CAS 148-24-3) — a free educational 3D molecular model for teachers and students, by MolGod.org. No legend required: the element symbol is engraved on each atom. Look at the skeleton first: 8-Hydroxyquinoline…
Methyl 3-hydroxyisoxazole-5-carboxylate (C5H5NO4, CAS 10068-07-2) — a free educational 3D molecular model for teachers and students, by MolGod.org. Every atom carries its engraved element symbol, so no colour key is needed. In Methyl…
1-(2-Hydroxyethyl)piperazine (C6H14N2O, CAS 103-76-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Read the atoms directly: each sphere bears an engraved element symbol. A one-colour print of a…
4-Fluoro-1,3-dihydroxybenzene (C6H5FO2, CAS 103068-41-3) — a free educational 3D molecular model for teachers and students, by MolGod.org. Each atom is labelled with its own engraved element symbol: no colour chart needed. A one-colour…
V případě potřeby můžete změnit velikost v kráječi. @Grip se velmi dobře drží. Po roce používání se nic nerozbilo. Vytištěno z PETG na základní nastavení. Nepřidal jsem žádné obvody. Lepené univerzálním silným lepidlem.
This Radar Presence Sensor is easy to build and pretty cheap considering its performance. The firmware uses ESPHome . The sensor uses the universal ball-joint design so it can be oriented for accurate detection. I provide a skadis mount…
2026-04-19 Updated models to be thinner and designed a cache. Credit to Meaicon, Md Tanvirul Haque, Assetwave, Ilham Fitrotul Hayat, KP Arts, Freepik, and Kiranshastry for the symbols.
