Counting matching models…
Its always so anoying when you lose one piece in a boardgame and you cant play it anymore. Thats why i made replace ment parts. So you can keep enjoing the games. Some pieces i made 2 varsions the filles with filled inn are less acurate…
I was making an avionics bay and went off on a tangent with my calipers and made a lot more detail than i needed to. The Perimeter of the PCB is exact along with the 4 securing holes which i pulled from MissileWorks directly. Everything…
For 4in diameter rocket with 8in electronics bay. Main sled houses the RRC3, 9V battery, apple airtag, and is secured by 1/4 -20 threaded rod. Components should be secured using M3 screws. The interface rings position and hold a figertech…
I wanted to make a case to hopefully help protect my RRC3 LCD module from getting damaged/banged around as much. It has 2 pieces, a base and a top. The 2 pieces snap together as tolerances are pretty tight (perimeter is .5mm larger on all…
I made this because the three cars I have from DEERC all have different methods of holding the battery down. This one seems to be one of the better ways to hold it down. I have printed in PLA and TPU, both work fine. Pictures attached are…
Added clearance in the frame for the pinion and the suspension to move and added wheelwells for clearance in the truckbed. PSA! YOU REALLY NEED THE TRUCKBED, if you dont use it you might damage the wheels/motor/chassis of your car, even…
Description BN-880 GPS holder. Strudy mount. Route cables on the side with some cable slack. Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No Supports: yes Resolution: 0.2 Infill: no - use 500…
This is a drill guide for the RRC2+ altimeter from MissileWorks. Category: Hobby
I had purchased a revell\monogram ferrari gto 250 body online but it did not have the cockpit. I used the windshield for a template to make the cockpit and tried to keep it as flat as possible. I printed in in .3 at 30% infill and it…
Remix of a case by Ryancx, so that it can be printed without supports. Stick protection is glued in from behind. Bottom part can be found in original project.
RadioMaster TX16s - Asa y pestillo de la caja de transporte de RadioMasterRC
ARRCO HAND CRANK CARD SHUFFLER CARD DRAWER. I don't know if it will work with the battery powered version. V3 :I updated it a little, the cards were falling out because the back wall was to close. So this might work better for you, if the…
For those who have the first two sensor gens that can be battery replaced. The housings can not be taken apart without destroying them. For irons and woods you can us the Arccos grips but for the putter there is none so it needs an…
I am into trains and this train type caught my eyes. Launched in 2022, this red line train in Boston is made by CRRC, operating on the famous red line on the MBTA network. I recommend printing the models on a larger scale, because i can't…
This is a tool to make it easier to set the preload for the swivelballs on a RRC/Defender/Discovery when doing a swivel ball replacement or larger service. Utilizes a 3/8" ratchet
This is the bottom inspection cover for the zf 4hp22 transmission found in most NAS LR products, the trucks ive owned have usually had them missing. Recommend printing in something oil and heat resistant.
Necessary parts (or their analogues): - Aluminum Electrolytic Capacitor Panasonic EEUFR1A222L - 10 pieces; - Screw DIN 912 M2.5x20 - 4 pieces; - Copper wire Ø1.6 mm - ~0.4-0.5 meters. P.S. The photo shows a prototype, and there were no…
This is a tool to make it easier to set the preload for the swivelballs on a RRC/Defender/Discovery when doing a swivel ball replacement or larger service. Utilizes a 3/8" ratchet
This is the bottom inspection cover for the zf 4hp22 transmission found in most NAS LR products, the trucks ive owned have usually had them missing. Recommend printing in something oil and heat resistant.
This is a battery mat that I designed for my RRC LWB, I've yet to have a truck that has an original mat or tray in it and have mostly just seen the batteries floating without even-tie downs in their original spot. This fit's down onto the…
This is a battery mat that I designed for my RRC LWB, I've yet to have a truck that has an original mat or tray in it and have mostly just seen the batteries floating without even-tie downs in their original spot. This fit's down onto the…
