25 models
A small shelf designed to hold the MikroTik CRS305-1G-4S+IN switch in place and connect to a server rack. There are small pegs to hold the switch in place: it is a somewhat tight fit, but the switch can be set atop the pegs and slid…
Print approx. €4.31–€5.26 excl. taxPreliminary estimate for one variant
As many other users the wristband of my Polar RS300X broke. Therefore I designed this adapter plate so I can mount any 20mm wide wristband to to watch. After cleanly cutting off the rest of the original wristband you can directly mount…
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
Snaps onto the switch and locks into side vent holes with small pegs. Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Best to be printed with fan side on the…
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
It is designed in 2 different parts, left and right which are screwed onto the switch.
A shelf for mounting MikroTik CRS305 in modular rack. Can be mixed and matched with: blank panels: https://www.printables.com/model/898351-rack-mount-empty-panels-small-printer-friendly patch panels:…
A shelf for mounting MikroTik CRS305 in modular rack ( https://www.printables.com/model/79585-low-profile-modular-1u-relay-rack-mount-for-16-key ). Provided stl is suitable for mounting on the left side, but can be flipped for right side…
This is a fan duct to fit a 120mm fan to the underside of a Mikrotik CRS305 10G switch, for extra, quiet cooling of the processor and SFP modules. It attaches to the switch by sliding a pair of lugs into the switch's wall mount screw…
I designed this Cover and Fan support for cooling the SFP+ RJ45 modules in my Mikrotik CRS309 (fantastic router/switch). With this, my modules seem to be running very cool: in fact when touching them I feel they are not even slightly…
Requires opening the switch and fastening screws through vent holes (non-destructive). Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Compatible with modular…
This mount lets you rack both the Ubiquiti USW 16 Pro Max and the MikroTik CRS305 together in a single 1U space. It fits securely and feels solid once installed. I printed mine in PLA and it holds up well, but a tougher and more…
A 6-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
4mm holes for underside mounting.
Rack Shelf for CRS305-1G-4S+IN but shortened to save fillament, and mirrored to show the status lights better.
The Mikrotik CRS304-4XG-IN does include a small DIN rail mount. It is likely to be also included with other products they make. This DIN rail clamp does use a spring. I made the indent for this spring different on both sides, so it…
MikroTik CRS305 Dual Rackmount — 1U, 19", LEDs Front, Fan-Ready Mounts two MikroTik CRS305-1G-4S+ switches side by side in 1U of a standard 19" rack. Most CRS305 rackmounts turn the switch around so the SFP+ cages face front — convenient…
This is a 1U rack mount for MikroTik CRS305-1G 4S+ IN . This model has exactly twice the width of the original model , so it can be used in combination with the original model. (e.g. 1 MikroTik with 4 raspberry pi, 2 MikroTik with 2…
Allow mounting the switch onto an LGX panel opening, such as onto this: https://www.amazon.com/dp/B0C49HJ79H Printing To quote the creator I remixed from: This switch can get really hot while operating. Do not print it in PLA/PLA+ or…
Remix eines Entwurfes zum Kleben oder an die Wand schrauben! Ich hoffe er gefällt euch! Lasst mir ein Like da!!!
SKADIS mount for the CRS304-4XG-IN, allows you to use the provided din clamp to mount the switch to a skadis board. Uses the Skaids T-Nuts mounting system:…
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
