1 / 3
MikroTik CRS305-1G-4S+IN LGX mount — image 1
1 / 3

MikroTik CRS305-1G-4S+IN LGX mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount the MikroTik CRS305-1G-4S+IN switch onto LGX panel openings for rackmounts.

Rating
0 / 5
Likes
5
Downloads
13
Makes
0
Views
299
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Allow mounting the switch onto an LGX panel opening, such as onto this: https://www.amazon.com/dp/B0C49HJ79H

Printing

To quote the creator I remixed from:

This switch can get really hot while operating. Do not print it in PLA/PLA+ or PETG. Use filaments like ABS, ASA, PA or PC.

Print quantities:

  • 1x the LGX-compatible mount (front facing down)
  • 2x nuts (laying down)
  • 1x left bolt (flat side facing down)
  • 1x right bolt (flat side facing down)

I created left and right bolt variants due to a quirk of how I created the cavities in the mount, but it is technically ok to interchange them.

Important: The bolt-based mounting is designed to let you print the bolts flat-side facing down to have the strongest outcome when considering layer separation risks. This way you can print all the parts without supports.

Instructions

1. Press the bolts into the cavities on each inner side of the mount. It may help to do a 90 degree clockwise twist while pressing them in.

2. Slide the switch in, past the bolts, which will lock the bolts in place.

3. Twist the nuts on.

4. Enjoy!

Tags