Counting matching models…
A 35mm DIN rail compatible housing to hold a WeMosD1 Mini and a common RS485-to-TTL Adapter. Print instructions Parts 1x 2 Pin KF301 Screw Terminal 1x RS485-to-TTL Adapter 1x WeMos D1 Mini (microUSB Version, ESP8266) 1x 1mm Optic Fiber…
This enclosure is for a ESP32 D1 mini with RS485 modul and fits a DIN rail (one module). It consists of three parts: body, lid and a clip to fix it to the rail (like most devices). Two PCB terminals (2 and three pins) are used to connect…
A case for the WT32-ETH01 with a RS485 module and USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: TTL to RS485 Converter Module, e.g. https://www.aliexpress.com/item/32853794532.html 5 V…
This item can be inserted into the Shimano Tiagra RS405 hydraulic brake calipers to secure the brake pistons against accidental actuation of the brake lever when the wheel with the brake-disc is removed from the bike. Such actuation might…
This is a replacement spur gear for the HPI RS4 Evo3+. Its part number HPI 76817 (47T). It might fit other RS4's too. I don't have high hopes for this one but i literally can't find replacements to purchase online. I printed it in PLA…
Modified from the original: Slots to allow for the terminals to pass through easier. M3 recessed nut cutouts for mounting the speaker driver. Category: Automotive
!! The instruction is old version. I will replace it ◆Redistribution of this mod, sale of products/commission using this mod is prohibited. (If you want to do, please contact me.) I am not responsible for anything that happens using this…
Helps you to level the swash plate on the goosky rs4 heli
Small casing for Wemos D1 mini v3 (ESP8266) with an RS485 to TTL Module. Used for Communication between Smartmeter and MQTT Broker via Tasmota. Wemos is mounted with 2 pcs 2x10mm Self Taping screws, RS485 to TTL module and the lid is only…
BOX DIN for wemos D1 Mini & RS485-Modbus Converter
My sample is for ESP32 c3(s3,c6 etc) supermini https://www.aliexpress.com/item/1005009014269977.html ttl to RS485 adapter https://www.aliexpress.com/item/1005006027343580.html mini Buck 5-30V to 5V…
Dies ist eine Aufbewahrungsbox für Einlegeringe der Kreg Fräsplatte PRS4034/PRS4038. Auch für das Montagewerkzeug ist ein Fach vorgesehen. Die Box wurde in FreeCAD erstellt, die Zeichnungsdatei ist beigefügt. Einlegeringe für die…
Goosky Rs4 Venom / Legend make sure printer calibration is fine, if not you need to scale it slightly
WIP this does not fit original tires, this is completely independent! tires: tpu wheels: petg Category: R/C Vehicles
This is a WIP to create an enclosure for @Tysonpower's DIY Hörmann RS485 Bridge v1.2 (HCP Emulator) PCB. Model was designed for tight fit , your printer must be correctly calibrated or parts might not fit. Enclosure characteristics:…
These are simple plates to block off the area where the mirrors were if you remove them for track days or bar end mirrors. The countersunk version is meant to be used with 6mm countersunk fasteners. The buttonhead version is meant to be…
This is a simple tool for opening Vaisala RS41 radiosoundes, also known as weather balloons. After injuring myself again trying to get the plastic latches to relelase with pliers and screwdrivers I thought there must be a better way. I…
How to use the tools video: https://youtu.be/PJnoJSMHrW0 I did a lot of trial and error to get this design perfect. The small clip pops right out with no effort. The larger clip is very stiff and takes a lot of force, but this tool fits…
Replacement Throttle Linkage for a HPI RS4s Nitro Star G3.0 engine. I recommend printing this edge down with supports as shown to avoid layer lines going horizontally across the neck of the part. WARNING THIS PART MIGHT RANDOMLY FAIL!!!…
Update 2.12.22: step-Dateien hochgeladen / step-files uploaded Einlegeringe für Kreg Fräsplatte PRS4034/PRS4038 Im Lieferumfang sind 3 verschieden Einlegringe, die mir nicht ausreichten. Ich habe daher selbst weitere erstellt, darunter…
The Seeed Studio RS-485 Breakout Board is a versatile RS-485 expansion designed for all Seeed Studio XIAO development boards. Equipped with the TP8485E transceiver IC, this breakout board efficiently converts UART serial streams to RS-485…
This is a Diffuser for an RC car (optimized for HPI RS4 Sport3). With this Diffuser, you can increase the downforce of your RC car to enhance the cornering speed. Advantages over the Previous version Better airflow towards the diffuser…
◆Redistribution of this mod, sale of products/commission using this mod is prohibited. (If you want to do, please contact me.) I am not responsible for anything that happens using this mod. This mod may require post-processing depending…
It's made for the USB RS-485 converter with FT232RL + SN75176. The XLR plugs are from AliExpress. I simply glued the module into the case, and the XLR plug is secured with 2mm screws. The lid is also secured with 2mm screws. Links: XLR:…
This is a Diffuser for an RC car (optimized for HPI RS4 Sport3). With this Diffuser, you can increase the downforce of your RC car to enhance the cornering speed. (STILL IN PROGRESS!) Advantages over the First version More downforce 9…
This is a Diffuser for an RC car (optimized for HPI RS4 Sport3). With this Diffuser, you can increase the downforce of your RC car to enhance the cornering speed. (STILL IN PROGRESS!) Use Brim to print Print Settings Printer brand:…
If you remove your passenger pegs you can bolt this in place to cover the holes. Needs 8mm socket head bolt to hold in place, the stock passenger peg bolts are too long and won't work. I suggest printing this upside down with supports,…
Installing Magnet is optional 20x5x2mm Magnet
Already printed in PLA and has had 600 flights so far
the printed version you see in these pictures is positive right you need two 2x8mm (or longer) and replace them with front canopy mount screws Heat gun recommended for first time xt60 socket push in
JK BMS v19 rs485 board mount plate compatible with Communication Interface Board P-Link-CR-V2.0 for Smart JKBMS
DJI RS3 & RS3 Pro Gimbal holder for IKEA Skadis Pegboard using T-Clip system for best quality and strenght. It can securely hold DJI RS3 and RS3 Pro with the battery grip. Designed to be put as in the photos to make up for the slight…
RC body rear magnetic mount (for HPI 1/10 RS4 RTR).
Since wheels for the micro RS4 seem to be discontinued, I created some basic wheels that fit the HPI D Compound soft rubber tires. There is a center block support so that the tire foam stickers do not need to be used. Printed on Prusa…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
https://www.printables.com/model/1335389-goosky-rs4-landing-skid-gsk-gt020062-new-version (New Version) Goosky RS4 Landing Skid (Old version)
Goosky Rs4 Vemom / Legend Tail fin in three different thickness Petg, Abs, or Nylon recommended Thicker version required longer screw
Custom-designed wall mount brackets for securely displaying your Goosky S1, S2, and RS4 helicopters. These mounts provide a clean, space-saving storage solution while keeping your heli protected and ready to fly. Features Designed…
Summary Enclosure for USB-RS485 adapter, several versions, available with window for access to RX-TX jumpers. RX-TX jumpers, e.g. may be required to connect a logic analyzer. Models in STL, STEP, SolidWorks 2020 format. BOM Self-tapping…
This is a block off plate for the front turn signals on a USA-spec Aprilia RS457. If you remove the front signals you can bolt this plate in place of the missing stalk using a 6mm nut. These do not have to be very tight, just enough to…
Soporte para sujetar adaptador RS485 de la BMS JK. Diseñado para atornillar a superficie con 2 tornillos avellanados
Remix to take an Neutrix XLR plus added features so the PCB stays in place without needing glue. Printed with a 0.6mm nozzle with 0.3mm layer heights in PLA
This tool is used to release the connector for the RS485 (MODBUS) port on the FOXESS Invertors. I have included the step file in case anyone wants to tweak the design but it seems to work as it is. Print Settings Printer Brand:…
This is a RAM mount that attaches to the steering stem nut. It uses an 8mm RAM ball that is sold/intended to be used with the handlebar clamp. An STL for the RAM ball and shaft are not included, I used one I had sitting around, but may…
This is a remix of a Lipo Holder for an HPI RS4 Sport (a vintage 1st Gen version). This has been modified to add a small pulley to slightly raise the belt off of the LiPo case. Otherwise they would lightly rub so this hopefully prevents…
Goosky RS4 Venom “ Larger ESC Mounting Tray” The XT60 version needs to be warmed(with a heat gun) to push into the socket for the first time
This is a remix of Sean's original ESC mount for the Hobbywing 80 amp esc.
Goosky RS4 Landing Skid GSK-GT020062 (New Version)
Top Plate with integrated battery holder (HRC Power 2S 2400mAh) Verlcro straps: 140x10x1,5mm Integrated XT30 mount so you dont have to fiddle with the connectors... just glue in the XT30 on the ESC side. (Press fit+glue, im waiting for my…
Click fit top, allows access the header pins and SD card on the rear. The side mounting bars can be printed or removed body
Replacement for the DJI RS4 Pro.
Printed in PETG, without supports. oriented as in the picture This mount allows you to secure a Elfin EW11 RS485 to Wifi module with a screw or with double side tape
Replacement upper Suspension support arms for the HPI RS4 3 evo+ (might fit other rs4's.) I decided to make thicker custom ones rather than design an exact copy of the originals from the car. You can view/download the Fusion 360 project…
End cap with 7/16-28 UNEF thread for Amphenol Ceres Mini Size connector for comm cables on ePropulsion outboard motors
Description: This is an enclosure designed for an RS485 sniffer used to enable communication between the JK inverter BMS (JK-PBx BMS) and ESPHome/Home Assistant via ESP SERIAL (UART-TTL) + SERIAL TO RS485 + ETHERNET CABLE, as part of the…
RS4-Style Grille Badge for Audi A4 B8 / B8.5 This project is a 3D printable RS4-style front grille badge/emblem intended for custom and aftermarket honeycomb grilles used on the Audi B8 platform. The model was designed with practical FDM…
These are head- and rear light buckets for the micro-RS4 Ford Mustang from HPI (Justin Pawlaks formula drift car in Falken Tire livery). They use 4mm square white LED SMD chips for the head lights and 4x3mm red LED chips for the rear…
This will cover the hole left in the fender when you remove the reflector. Attach with a 6mm nylock nut over a washer. Be careful not to over tighten, it only needs to be tight enough that it doesn't spin. Blank version has nothing on the…
Goosky RS4 Anti-rotation Bracket GT020023
It is international law that every mechanic that changes a battery MUST lose the terminal cover, so here is a part that replaces the terminal cover and attaches to the battery cable so it cannot be lost as easily. You will have to use a…
This is an alternative battery holder for the Micro-RS4 1:18 scale rc-car chassis from HPI. It holds two 18650 cells. You need to split the brackets in your slicer software Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No…
A simply mount for this board
A 3D printable replacement for the carbon fiber clip for battery retention. I assemble my clip differently from the manual; I put the metal component of the clip in between the helicopter frame and this plastic part to increase the amount…
The main sections bolt on where the passenger pegs are supposed to go. The rear brace needs a small hole drilled in the tail section for the bolt that holds it on. I printed this with a carbon fiber infused nylon filament. I printed this…
I recommend a strong filament although in testing PLA could last a reasonable amount of time. It might rub the top cover for the center driveshaft.
Designed to hold an esp32 C3 from DIYMALL brand (see below) with external antenna , and a rs485 ttl board. Power is supplied via usbc. https://aliexpress.com/item/1005008047249439.html https://aliexpress.com/item/1005008393340702.html I…
Are you looking for a sub $20 mod to bring life back to an old brushed on road rc car and make even a driveway difficult and a challenge to drive? Then your in luck This fits 6mm body posts with 65mm spacing Runs off the servo output of a…
Ok let's be honest, when it comes to fastening bodywork and other bits, Aprilia makes some pretty dumb choices. For example - if you try to remove the mirrors for a trackday or whatever, you will discover that the nuts drop down behind…
This is a case the RS485 to WiFi adaptor for epever products. https://www.tindie.com/products/plop211/epever-rs485-to-wifi-adaptor-v15/ It's a very snug fit but stops things moving and looks great once installed. Print Settings Printer…
GooSky RS4 Canopy Mount GT020031
A simple enclosure for a USB RS485 interface. The onshape model is available here .
Din Rail RS485 converter mount. eg for mounting the modbus tcp controller on a home batterie like marstek. Mounting can be done by using 6mm magnets. V2- easier mounting the module on the DIN rail mount. Parts: RS485/232Converter…
Case for Waveshare RS485 CAN HAT + Raspberry Pi 4 for mounting on a DIN rail Print the spacer with a brim Screws/Standoffs for assembly: M2.5 x 12 screw M2.5 x 6 + 6 standoff M2.5 x 8 + 6 standoff M2.5 x 10 nut M2.5 x 12 screw
This is a reference model to assist in creating cases and other accessories to the RS485 Breakout Board ( https://wiki.seeedstudio.com/XIAO-RS485-Expansion-Board/ ), and I have included the XIAO ESP32-S3 and Wio-SX1262 module models, not…
Goosky RS4 Tail Case GT020049 This model has been tested with ASA & ABS for more than 600 3~4 minute hard 3d flight Original screw with Locktite is fine but it's better to use self-tapping screws(picture) Support and Brim are required DO…
Enclosure for the Vaisala RS41 radiosonde while retaining the original AA battery holder. The enclosure provides access to the 10-pin connector, allows the button to be pressed, and makes battery replacement quick and convenient. Share…
Tired of the IW-RS424-07 being way too loud, even though your build isn't generating that much heat? This one's for you! Printing: Print laying flat with the face having all 4 ears against the build plate. You'll need to use supports to…
Touch panel for smart home control via Modbus RTU RS485, featuring 4DI/DO, 1-Wire communication with DS18B20 temperature sensors, and additional digital and analog inputs. 12VDC power supply, Modbus address settable with a dip switch.…
Hier bekommt ihr eine 19" 2HE Rack Halterung für den Waveshare RS232/485/422 TO POE ETH (B) Adapter. Ein Modbus TCP Gateway mit PoE Anschluss. Ich nutze ihn um eine Heidelberg Enrgy Control Wallbox mit eine Fronius Symo Gen24…
This design is a new variant of my previous design which allows me to mount an Accsoon wireless transmitter under my RED Komodo by replacing the back plate for the NPF battery (since I use the DC jack to power the unit anyway). You should…
Easy to print, no supports needed. The Radiosonde is deliberately a snug fit so that is is stable, bit if it's too tight try scaling the model up a couple of percent.
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Description: This is an enclosure designed for an RS485 sniffer used to enable communication between the JK inverter BMS (JK-PBx BMS) and ESPHome/Home Assistant via ESP SERIAL (UART-TTL) + SERIAL TO RS485 + ETHERNET CABLE, as part of the…
DJI RS3 & RS3 Pro Gimbal holder for IKEA Skadis Pegboard using T-Clip system for best quality and strenght. It can securely hold DJI RS3 and RS3 Pro with the battery grip. Designed to be put as in the photos to make up for the slight…
Custom-designed wall mount brackets for securely displaying your Goosky S1, S2, and RS4 helicopters. These mounts provide a clean, space-saving storage solution while keeping your heli protected and ready to fly. Features Designed…
My sample is for ESP32 c3(s3,c6 etc) supermini https://www.aliexpress.com/item/1005009014269977.html ttl to RS485 adapter https://www.aliexpress.com/item/1005006027343580.html mini Buck 5-30V to 5V…
Hier bekommt ihr eine 19" 2HE Rack Halterung für den Waveshare RS232/485/422 TO POE ETH (B) Adapter. Ein Modbus TCP Gateway mit PoE Anschluss. Ich nutze ihn um eine Heidelberg Enrgy Control Wallbox mit eine Fronius Symo Gen24…
