Counting matching models…
The carseat comes with a cup holder, but you can clip something on both sides. My son wants somewhere to keep his sunglasses (this could also be good for small toys). Print instructions I printed mine using PETG with a 3mm vertical…
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for PETGSource material: PET
I created this for my kiddos on our roadtrip, holds his snacks and cup without issue. They print without supports as two different pieces, then just superglue together when done. This is my very first time designing anything so I welcome…
designed for a nissan cube. ymmv
I Printed this with supports, right side up. printed in PLA perfectly but planning on redoing in ASA to survive the summer.
This adapter is enabling instalation of new underseat subwoofer BLAM BM200W to original BMW box. BLAM BM200W in comparison with BM200XF needs deeper instalation space for BMW 3GT (F34) with HiFi option. Adaptor increases instalation depth…
Add some storage to your Yozma IN10, Cemoto D02 or Valtinsu EM-5 dirt bike, this is for the regular version NOT THE PRO version which is a different size. Very thin profile so it gives you maximum space, fits perfectly and the seat closes…
This is a hanger with two hooks. It goes on the back side of a back seat and simply hooks over the carseat anchors. It works on most seats that fold down. I keep an umbrella and an ice scraper on mine. For strength, print laying flat.…
RSEAT P1 SimRig / Sinuslive Bass Pump III Holder Note my other models for RSEAT P1! You will need the following per holder / speaker: 6 x M4 4x6 embedded screw nut 3 x M4 x 12mm screw for the speaker 3 x M4 x 16+ mm screw for Part A and…
This mount attaches to the seat adjustment leaver on a Jeep Wrangler JL. The friction provided by the clamp is enough to hold it in place, however, optional zip-tie loops are provided for additional security. I built this mount for a…
Yeti makes a pretty sturdy kids water bottle (the Rambler Jr. 12 oz Kids Water Bottle), but this doesn't fit into the integrated cupholders of the Nuna Rava carseat I have. Enter this adapter, which has a OD of 67mm for the cupholder and…
Hidden under-seat mount, not visible from outside the car Works for most garage door openers Dimensions taken from and tested on Highland Model 3 driver and passenger seats, suspected to fit on Model Y and older year cars The wide model…
RSEAT P1 NobSound Mini 2x50W Holder Note my other models for RSEAT P1! I printed the parts with regular PLA, standard 0.2mm profiles, 2 or 3 walls, it doesn't really matter because the models are thin-walled. (ca. 2mm) Glue the two parts…
There are a bunch of things people typically want to mount rearward facing on their bikes (mountain or road). Most of the vendor mounts use a 20mm M3 spacing for the actual mount (GoPro or Garmin for instance). Most bike saddles have a…
If you don't have the Premium Sound upgrade in your Grenadier because you have the dual battery or didn't opt for it in the first place - it's an easy retrofit. The factory wiring is located underneath the rear passenger seat and is a…
Mount to attach the Dayton BST-1 bass shaker to any SIM rig with a bar size of 42.75mm diameter. It was made specifically for the RSeat S1 that I have and works great to support and attach the bass shaker to the rig. Uses M4 and M3 screws…
A larger cup holder that fits the Graco Triride 3-in-1 Carseat. Print with support and be careful when removing it. It is easy to snap off the latch on the bottom on accident.
Fits underneath the middle seat of Rivian R1S
Flexible cable management for RSeat P1 Simrig, respectively for any 50mm (round) pipes / tubes. Suitable for up to 5 cables with a maximum diameter of 8mm, normal power cables, USB cables definitely work. Note my other models for RSEAT…
FITS underseat divider for the far end FITS provisions. Print with higher temperature capability filaments (I used ABS since they will not be exposed to sunlight for extended periods) Uses the brackets from:
A scanned 3D model of the interior of the "pet carrier" underseat storage bucket for a 2016 or later Vespa GTS 125-300. I used this as a cutting tool in Fusion to design a custom organizer; it's not meant to be a printable replacement…
Nozzle used for printing - 0.4 mm Layer height - 0.2 mm Print duration approximately 1,5 hours With supports
Yamaha XSR 700 Underseat AirTag Mount Overview A sleek and secure 3D printed mount designed specifically for the Yamaha XSR 700 that allows you to discreetly install an Apple AirTag under your motorcycle seat. This mount provides…
This will provide mounting for the Helix speakers to the underseat subwoofer enclosures. The wide and narrow hole for the wires can be modified to accomodate your cabling. Since my OEM Hi-Fi (676) subwoofers were not screwed in but glued,…
RSEAT P1 SimRig Endcaps Foot Protector Note my other models for RSEAT P1! I printed the parts with: 0.2mm layer heights (Bambu Lab X1 Standard Profile@BBL X1C) 3 / 3 top and bottom layers 3 walls and 15% infill printed with regular PLA…
Allows for mounting a hailong style battery under an Arield Rider X-Class seat
Made especially for Specialized seat Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PLA Category: Sport & Outdoors
Case for between the “jaws” on the underside of the 2016-2018 Honda CTX700
This is a clip that goes on the handle of an Uppababy carseat/carrier which can hold contrast cards. The v1 model requires two cards to be inserted in order for them to not fall out. I have not tested the v1.1 version but I made the card…
Nozzle used for printing - 0.4 mm Layer height - 0.2 mm Print duration approximately 2 hours With supports
2 diferent cupholders for safety first carseats. One with a tray that can face forwards or back. The other is a tablet/ phone holder that fits on the right side cupholder slot. I printed in 78D TPU for strength but PETG or ABS would…
A 2-piece mounting bracket to secure a dashcam's external battery under the driver's seat of the E210/2019+ Corolla. Ideally, for those without the JBL Premium Audio package Only using Velcro to mount a dashcam battery to the vehicle's…
I broke the clip when tightening the strap and threw this model together to quickly replace the clip. It's not perfect but does the job well enough. This was for a SafeFit mirror from WalMart from several years ago. Printing Printed in…
Pokud Vám Vaše podsedlová brašna TOPEAK DYNAPACK při jízdě naráží do zadní pneumatiky a dochází k poškrábání je možné upnutí této brašny nadzvednout pomocí mé flexibilní úhlové vložky. použití vložky je vhodné především pro celoodpružená…
We bought ebikes and wanted a bit more security for them. Airtag seemed to be the ideal answer. However finding a good place to hide it and not impair its range was an issue. Other airtag holders were set up for angled seat rails (as I…
Nozzle used for printing - 0.4 mm Layer height - 0.2 mm Print duration approximately 2 hours With supports
Nozzle used for printing - 0.4 mm Layer height - 0.2 mm Print duration approximately 1 hour With supports
This system allows you to redirect the air from the rear AC vents directly to your kids in their carseats in the back. Great for rear-facing carseats. Hoses: Cut this in half:…
A 2-piece mounting bracket to secure a dashcam's external battery under the driver's seat of the E210/2019+ Corolla. Ideally, for those without the JBL Premium Audio package Only using Velcro to mount a dashcam battery to the vehicle's…
A scanned 3D model of the interior of the "pet carrier" underseat storage bucket for a 2016 or later Vespa GTS 125-300. I used this as a cutting tool in Fusion to design a custom organizer; it's not meant to be a printable replacement…
FITS underseat divider for the far end FITS provisions. Print with higher temperature capability filaments (I used ABS since they will not be exposed to sunlight for extended periods) Uses the brackets from:
TESTED ON THE YOZMA IN 10 PRO , STANDARD IN 10 UNTESTED. You will need to use tape/glue to hold it in place, I recommend black tape on the frame and print, tape where needed to prevent extra movement. The indent on the right side is for…
TESTED ON THE YOZMA IN 10 PRO , STANDARD IN 10 UNTESTED. You will need to use tape/glue to hold it in place, I recommend black tape on the frame and print, tape where needed to prevent extra movement. The indent on the right side is for…
