RSEAT P1 SimRig flexible cable management
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RSEAT P1 SimRig flexible cable management
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Flexible cable management for RSeat P1 Simrig, respectively for any 50mm (round) pipes / tubes.
Suitable for up to 5 cables with a maximum diameter of 8mm, normal power cables, USB cables definitely work.
Note my other models for RSEAT P1!
I printed the parts with:
0.2mm layer heights (Bambu Lab X1 Standard Profile@BBL X1C)
3 / 3 top and bottom layers
3 walls
and 15% infill
printed with regular PLA
The model is available for free download and use.
If you still want to invite me for a coffee for my effort, troubles and time (I ran out of filaments a couple of times), you can do it via:
https://paypal.me/mikloskiszely
Only the effective cable routing is printed, which is secured with a 20mm wide and approximately 220mm (22cm) long Velcro tape.
(which can also be used for cable ties without a self-adhesive side)
The Velcro strap is looped through and folded back approx. 2mm at the end. This ensures that the band can no longer slip out of the guide and can be tensioned. See detailed images. (pictures 2 & 3)