1,204 models
Spin it by 90° to have the big flat face on the print bed. Prints easily without support. I printed it in PLA(Prusa recycled PLA), although it might be better to print in a material that resists higher temperatures. A cable tie can be…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
This is a simple cable holder for the kitchenaid model: ARTISAN. To mount it, simply loosen the screws on the back and screw on the cable holder with these screws.
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
MMU BOX is a mechanically engineered, mostly 3D-printable rewind buffer system designed specifically for the Prusa MMU3. It replaces the stock filament buffer with a compact, modular system featuring independent active rewind per spool.…
I was inspired by the LTT cable management arches (not yet released at the time, but featured on WAN Show ), and wanted to see if I could design a more flexible solution, both in terms of sizing and literary. You will need: 2x 15*3…
A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…
Laptop chargers are always a hassle. This add-on for the Surface's charger makes managing the wires easier. Everything is printed in place. Tested with 0.4mm nozzle and 0.2 layer height. It is my first print in place design, so I'm not…
Resized to match the 4 sizes of Command Strips.
After switching up desks, we wanted clips like we used to have for our old desk to manage our pc cables. Taking inspiration of what worked we started from scratch. The big top hole is to place more permanent cables, like for you monitor.…
Nachdem ich meine Google Pixel Watch 3 bekommen habe, wollte ich eine schönere Lösung als nur den lose herumliegenden Lade-Puck. Das Ziel war es, einen funktionalen und gleichzeitig eleganten Ständer zu schaffen, der die Uhr sicher hält…
2U plate to hold 2 Unifi power bricks. Works with the power brick from the UCG Fiber and Lite 9 PoE and other approximately 75mmx75mm power bricks. I found that the 2 that I have are slightly different dimensions so I built in enough…
This 3D-printed Server Rack Cable Management Velcro Mount offers a simple yet effective way to keep your network and AV cables organized. Designed to fit standard server rack configurations, this mount allows Velcro straps to pass through…
Du hast es satt die ganze Zeit den Surface lade Kabel zu endknoten? Oder du willst nicht, dass es beim Transport in deiner Tasche sich verhakt? Oder du willst die Kabel nur Stielvoll aufrollen? Dann habe ich für dich genau das richtige.…
This holder is designe to be able easy changing one cable in run for another one without impact to the rest fof the cables. This designe is inspire by something that i saw doing Thomas Sanladerer.
Press fit semi-circular cover for inner corners of Ikea BROR storage system. Can cover wires or be used as a diffuser like I am Diffuser Print Settings: Clear PLA Thinner layer lines = less transparent/better diffusion
Transform your messy desk into an organized workspace with this innovative modular cable management system! Each module is 3D printable and features universal connectors that allow you to attach modules together from any side, creating a…
This is a fully customizable box designed to conceal wires leading to various devices. For instance, I've hidden long cables inside it that connect to the Speeder Pad attached to the 3D printer. To adjust its dimensions, you'll need to…
Manage your cables with this solution : Use 38 mm version for 4x 8mm cable diameter max Use 55 mm version for 6x 8mm cable diameter max. Use 43 mm version for 3x12mm cable diameter max
Cable Clamp Big Catch - Inside volume 50x26mm (7mm Cable input hole) Small Loop - 15mm diameter circle (4mm Cable input hole) Screws: Use wood screws in lenght you need. The screw hole has diameter 4mm and the opposite hole for your tool…
This is a snap in insert that can manage cat cables for those who don't like adding unnecessary patch cables and jacks..
This project is a modular control panel designed to manage power and devices in a 3D printer setup in a clean, safe, and expandable way. The base unit includes three front-mounted switches: 1× dual-stage main switch (KCD4) used as a…
This is a solution for cable management for CNC machines and laser engraver. It uses a zip tie and 3D printed part that can go on t-slots and v-slots sizes 2020 and up.
Low profile cable management clip for your dartboard. You can organize up to 6 cables.
🔥 This small upgrade changes your entire treadmill setup 🏃 Ultimate Treadmill Upgrade Kit for the Zipro Pulse – Safety Key Holder, Cable Management & Bottle Holder You probably know the feeling: You step onto your treadmill… and something…
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
Slide this cable management bracket onto your desk and tuck all your cables up under the desk, or along the back of the brackets. Desk can't have a lip or non-uniform top surface as the clip slides onto the edge of the top surface of the…
This is a simple cable management bracket. I used it to organize cables in my studio. I used PETG. 0.2 mm layers. With 20% infill and 3 perimeters, the bracket is firm and flexible enough. Check the drawing for the exact measurements.…
A little disclaimer, this is the first time ever I upload a model, feel free to add positive feedback how to improve :D Since a few months I built myself a little networkcloset and I wanted something to manage the cables so it looks…
Cable organizer for 3mm cable like Apple Watch cable or iPhone cable
A simple arc that can be stuck in the holes of an Ikea Ivar shelve and will help with cable management. The modell has a slightly thinner profile at the two ends and thickens towards the arc to better stay in the holes. If you have…
These are designed to allow for simple cable management within the beam running across the desk. The pocketing grants less material usage, ability to pull cables through as well as squeezing thin plugs through. Two of these have the…
Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief I recently installed the Sherpa “Extra” Heavy extruder on my CoreXY Converted RigidBot Printer, but I needed a way to keep the cables nice and tidy and reduce strain on…
For V3 Lowriders that have their electronics mounted off the gantry and are running a towline for cable management. For up to 1" cord protective wraps. Requires a flat plane to mount to.
I wanted a cleaner way to run a few cables along my small server rack and made this little part. You just put a velcro cable tie through the middle part to hold cables on. Zip ties would work too, but I don't really like zip ties for such…
Have built 10 inch rack and to clean up the wires made this plate. Optimized to be printed without any supports and whatever settings you wish. Here is video in case you want more context:
MMU BOX is a mechanically engineered, mostly 3D-printable rewind buffer system designed specifically for the Prusa MMU3. It replaces the stock filament buffer with a compact, modular system featuring independent active rewind per spool.…
A fully parametric cable guide to help clean up the cable clutter on your desk. --------------------- UPDATE: V1.1 Modified design, added printable thumb screw and nut + washer on recommendation from @Ajoli_112854 , I'm not sure I'd trust…
I was looking for something to help with cable management with my CGEM II mount - the original file was the closest thing I could find. I resized the file to fit the area around the back of the polar scope cover to fit the ring on.…
This clamp comes in 3 sizes and with the largest model holding 7 cables, with each cable having a maximum diameter of 6,8 mm. The two parts are screwed and held together by M4x10 mm screws. I printed mine out of eSUN PETG HS and 0.12 mm…
This 3D-printed Server Rack Cable Management Velcro Mount offers a simple yet effective way to keep your network and AV cables organized. Designed to fit standard server rack configurations, this mount allows Velcro straps to pass through…
I made a remix of the Cable Management Base (rackmountable) by Ascardia using Velcro, because installing the cage nut was a real pain You need to be an expert to do it or use special tools to avoid hurting your fingers. After doing some…
I think two size is enough for cable management, a smaller and a bigger. To install in the rail, simply insert and rotate it quarter turn. Tight enough so it doesn't slide in the rail. Use a 5-6 perimeter layer thickness to make it strong.
The original size was using holes which do not correspond to spacing used by openGrid. This version makes the base a bit wider and aligns the holes with squares in an openGrid board.
Transform your messy desk into an organized workspace with this innovative modular cable management system! Each module is 3D printable and features universal connectors that allow you to attach modules together from any side, creating a…
Right-Side Cable Management for FlashForge AD5X This cable management clip is designed to run along the right-side horizontal support of the FlashForge AD5X , helping to keep cables tidy, controlled, and safely routed during printing. I…
This project is a modular control panel designed to manage power and devices in a 3D printer setup in a clean, safe, and expandable way. The base unit includes three front-mounted switches: 1× dual-stage main switch (KCD4) used as a…
Mage Knight Mana Management Station – Dice, Crystals & Card Holder Level up your Mage Knight sessions with this 3D-printable Mana Station. Features: Perfect Fit: Custom slots for all 5 Mana Dice. Crystal Storage: Secure compartments for…
2U plate to hold 2 Unifi power bricks. Works with the power brick from the UCG Fiber and Lite 9 PoE and other approximately 75mmx75mm power bricks. I found that the 2 that I have are slightly different dimensions so I built in enough…
Changed the design a little. It now has a slotted hole so it can be bolted down with a m6 bolt and a fender washer
Low profile cable management clip for your dartboard. You can organize up to 6 cables.
Just purchased a new truck and wanted to keep the power cable for my Magsafe charger to be nice and tucked away the best way possible. So….I created these small clips that you press into the space between the panels of the dash. They are…
Heavy-duty desk-edge cable clip with 25mm finger clearance, dual USB channel, filleted corners, and gussets for strength
A heavy-duty, desk-edge cable management clip designed with Peter's ergonomic principles in mind. It uses a large, easy-to-pinch design with a minimum 25mm finger clearance. The interior channel is sized for up to two standard USB cables…
Simple cablemanagement hook for underneath a desk for routing a few cables. I used double sided tape to mount it
This is a functional, minimalist holder designed specifically for pen-type multimeters . The mount allows you to keep your diagnostic tool accessible while maintaining a tidy workspace. Key features: Dual-Clip Design: Securely holds the…
10" rack cable management panels made by using Ornotermes and nova++ models. Intended to be used in front of metal blank plate.
Just change the parameters as you like. Parameters ClipDepth - depth of the model NoOfCables - number of cables WingWidth - width of wings CableThickness - thickness of cables
I needed a comparable version of the Center Rear Stealth Skirt for my Changer build so I did some slicing and dicing in Orca Slicer to get one. I hope that this is helpful for anyone else that wants to take this pathway.
Fixation pour ruban del en silicone (5.6 mm x 11.6 mm) / Fixing for silicone tapes. Mon conseil, mettez au moins 3 parois. / My advice, put at least 3 walls. Fichier pour gestion del via esp32 réalisé avec IA ChatGPT, Claude et GEMINI. A…
Brush Cable Grommet for AD5X Flexible brush-style cable entry for heated bed wiring — clean, durable, and easy to install. This model is designed to guide heated bed cables through the printer enclosure panel. It helps prevent cable…
Added holes for cable management via vecro strips. Width is 245mm due to limitations of my printer. Height 2
Integrates this cable management system with the 1324501-gen2-table-top-kit-v2-240.
Improve the performance and aesthetics of your Creality Hi with this simple cable management solution. This mod prevents the main toolhead cable from sagging or drooping, ensuring smooth movements and preventing potential interference…
gave myself exactly about 2 hours on this, really proud on how it went judging by how this is my first time using fusion! if youve got some cables and need some (rather interesting) cable holder designs and a 3d printer, this may or may…
10mm channel negative space added so 10mm LEDs can slide into the channel securely without the adhesive.
Use these to hold your cables and keep your desk clean!
Say goodbye to cable chaos with this Cable Management Spine Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Print the support vertically with supports on the plate with the two bolts holders, I used PETG. Insert the bolts in the bolts holders. Remove the two nylon rivets on the left side of the plexi side panel. Insert the two screws in the…
I made this to hold cables and power strips under my desk. I used 1" drywall screws, to attach it to the privacy panel under my desk. It will hold cables, power strips, and even power supplies. It just keeps them up off the floor so I'm…
I use IKEA HELMET in my home "man cave" and this drawer arrangement is very helpful for storing small parts like screws and also for small tools arrangement.
I created a cable management system for my desk, which helps optimize and simplify things. It needs to be combined with a cable tray. Reference video:
I tried the 'arches' from the original model, but my desk is solid wood with an Uplift desk frame, so I wanted to use the existing metal frame, but the arches didn't work right. So, instead, I created a clip that takes a single magnet and…
Mini Hook for Rack cable Management This cable management hook mounts between 1U racks to reduce the size and fit into smaller desk racks. And it comes in 3 sizes, so print the model you want! ⓒ 2024 klayf (HONG-SIK WON) For…
Universal Modular Cable Management System (Pro Edition) Tired of messy wires on your 3D printer or desk? This modular, heavy-duty solution is designed to organize and secure cables of any thickness. Originally developed and torture-tested…
Schalter und Adapter können mittels zweier langer Schrauben an die Wand montiert werden. Zudem ist Platz für Kabel.
A delightful desk sign for the change manager in your life. Category: Office
Title: IKEA MALM CPAP Hose Management Clip - Perfect Bedside Holder Tired of your CPAP hose pulling on your mask or getting tangled in your pillows? This custom-engineered clip is the perfect solution for users of the IKEA MALM bed…
Tame your desk cable clutter with this premium, minimalist Cable Management Puck. Designed with a sleek, low-profile "donut" aesthetic, this hub stores excess wire length inside and routes your charging cables exactly where you need them.…
Parts for cable management under a desk. They are screwd to the desk and use 1/2" velcro strips to fasten the cables.
Pro cable clamp that stops kinks, adds strain relief, and cleans up desk clutter while protecting your connectors.
End the cable chaos with precision. The Hex-Route is a professional-grade, modular cable management system designed by TheOptiForge to keep your workstation clean, organized, and optimized. Unlike generic clips, the Hex-Route is…
Keep your desk organized with this adjustable, multi-slot cable clamp . Perfect for managing power cords, USB cables, and headphone wires – all without drilling into your desk. Key Features: Adjustable Fit: Designed to fit various desk…
🔥 This small upgrade changes your entire treadmill setup 🏃 Ultimate Treadmill Upgrade Kit for the Zipro Pulse – Safety Key Holder, Cable Management & Bottle Holder You probably know the feeling: You step onto your treadmill… and something…
A cable organizer to help tidy annoying wires from your desk/floor and store them neatly. you can scale each part according to a required size
My version of the new LTT flexible cable arches Download and adjust the parameters to suit your magnets and application! Should work with pretty much any magnet size. The parametric bits are a lot less robust than the solid arches, so you…
I made the "Wider Headphone hanger" even 20 mm wider to accommodate my audio-technica ATH-AD500X. Headbands up-to 65 mm wide will fit. And the screw holes are now 3.5 mm in diameter, so 3mm screws fit nicely.
I got tired of the factory grommets that came in my Uplift Desk -- the common variety where you rotate a piece inside to "clamp" the cables. The problem with the original design is that it does not hold the cables securely, and the inner…
Well ventilated case for a usb hub that will be moved around for podcast purposes, Protective, light ans my velcro strip
I got tired of using mounting blocks with zip ties and designed this wire clip for ease of adding and removing wires. As-is these will fit on a roll of 3M double sided 1" tape but can be resized. Print laying on the side for strength.
Cable Management Bar 5 Bar with slide 3 Bar with slide I took it from another website, But not able to find a link now. If the original author reading this, then I love to give your name here or transfer the ownership.
Clip for fixing the cable to the skirting board. I designed 3 models for 3 different sizes of cables (from 8 to 3 mm).
Kabelmanagementsystem, MC4 Stecker Halteclips für ein perfektes und vor allem Induktionsarmes verlegen der PV-Modulverkabelung auf dem Dach. Das gefrickle mit Kabelbindern und “Schlaufenlegerrei” hat damit ein Ende. Zu sehen hier: Meine…
Simple air hose mount for the Buster Beagle 3D V3 Injection Molding kit. The bracket slides over the vertical 2020 on the rear left of the machine. Optional space for zip tie.
This is a cable organizer for the Gamecube PSU. The model is sort of like a sleeve that you slid onto the PSU. Then it has groves on one of the sides for the cable that goes into the Wii console. You can fit the whole cable length into…
I wasn't satisfied with the other cable ties or cable clips I found on here, so I made my own. I found the cable ties that are like printed zip-ties to be fragile and difficult to print, and the cable clips to be brittle and non-locking…
