Top filament feed management Prusa Core L
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To allow for top filament feed management on Core One L while minimizing PTFE tube length
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Open Community License v1
Print the support vertically with supports on the plate with the two bolts holders, I used PETG.
Insert the bolts in the bolts holders.
Remove the two nylon rivets on the left side of the plexi side panel.
Insert the two screws in the support and fix them in place with the two bolts from the inside of the box.
Remove the small PTFE tube from the filament sensor and plug the 30 cm one instead, between the filament sensor and the support.
Plug the PTFE tube you want between the top PC4-M10 connector and your device.
You are done !
2 x M3x15mm screw
2 x M3 hex bolt
2 x PC4-M10 connector
https://www.amazon.fr/gp/product/B0DQTWTWQL/ref=ox_sc_act_title_1?smid=A11KAI2D472VN3&psc=11 x 30 cm PTFE tube