Counting matching models…
Update 25.8 Added a version separated into 3 parts to prevent the stick from breaking. V2 – with "R" gear and new design. Available with keychain holes. Fully print-in-place – no assembly required. Tip: When removing the plate from the…
Starship V2 The new version of starship, the starship V2 , is also available and is compatible with this booster. Updates 02/08/2024 Change parts SS_Tank_Bot_Black and SS_Tank_Top_Black to add thermal tiles. 21/04/2024 Correction of…
The Gearshift Fidget is the perfect fidget for all car lovers! But it's also perfect for everyone else, because it's simply great fun to use. The aim is to move the gearshift lever through the various positions. It is designed so that you…
The minis These are small combat vehicles (mainly tanks) that are designed to be printed on a FDM machine. These models were made to be printed easily on cheap machines with a .4 nozzles. All models were tested on a cheap 2yr-old and…
The revisiting of an old project of mine, which I had published here on Thingiverse with my old profile Ive printed using a Bambulab X1C and printed with Sunlu Matte PLA.
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
🐇🌷🥚🐣 Springtime is synonymous with Easter and PEEPS! These delightful Marshmallow Bunnies have been a beloved treat for nearly seven decades and a vibrant addition to Easter baskets worldwide. Who took a bite out of my Bunny?! Check out…
My son loves Paw Patrol so I have these figurines. They can be scaled up as I have tested that but I have not tested it
Hey guys! I would recommend printing this model vertically with supports. Here is a model of the SpaceX StarShip. This rocket will be the largest and most powerful vehicle ever made. Starship will be responsible for missions to Mars, the…
I'm sharing modified 1:144 scale models of SpaceX Super heavy - Starship I recommend printing in PLA with a layer height of 0.2mm and organic supports for parts where needed. The model is intended for more experienced printers. Print the…
Paw Patrol Marshall A note about my 3D printable figurines Over the years I experimented with creating 3D printable figurines, including a workflow that involved posing and adapting stripped game assets. It was an interesting phase of my…
This an remix of a great model with small improvements. It is a wide one Improvements: - parts fitting - front mesh done by triangular infill - bottom legs - like on Marshall devices - changed logo - tapered - added insert for 3 chambers…
Stay Puff Marshmallow Man.
What is this? This is my approach of designing SpaceXs Mechazilla Launch Tower. It is designed to work with AstroGuy's Starship. Ive also used his LauchPad. And a piece of the super heavy for the GSE Tank :D. How to Print? Some Parts are…
This is version 2 of my Starship style model rocket. As I'm learning how to design rockets I decided to overhaul the original design. I was working on the two stage version of this rocket but decided to take a step back and rework the…
This is a digital 3D printable model of T-70 X-Wing Starfighter from the Star Wars Universe. The T-70 X-wing starfighter, also known as the T-70 X-wing fighter, was the successor to the T-65B X-wing starfighter, manufactured by…
Description. The Hot_Staging_Ring_Metal_x1 replaces V2_Block_Jonction_SS-SH_x1 and then add Block_Jonction_HSR_x1 to assemble the starship. Printing There are 2 pieces to print. The total printing time is approximately 1h30. Tips Settings…
“R” gear - available in both right-side and left-side versions For a smoother gear shifting experience, press the lever down while changing gears . Fully print-in-place – no assembly required No supports needed Tip: When removing the…
I am always amazed by the incredible free software you can use nowadays. This cookie cutter was designed for my daughter with Inkscape and OpenSCAD following this tutorial:…
Feel the power of the Rebellion with this incredibly detailed X-Wing starfighter 3D model that brings the iconic spacecraft right to your desktop! This meticulously crafted STL file captures every signature detail of Luke Skywalker's…
This is the mothership of Goauld Anubis. It has mechanism inside which allows it to retract the superweapons. All the moving parts are linked into that mechanism so one movement will do all. Appart from that, it comes with a fleet of 8…
This is my model of the awesome SpaceX rocket Super Heavy Starship. The model is in 1/48 scale so it is almost 2,5 meters tall. The assembly is rather simple as I had marked all the parts with individual numbers so that you know how to…
I wanted to make an RSH-12 3d model just to test my CAD/designing skills and here we are. On the internet there are plenty of RSH-12 3d models including printable ones but for me it was too boring to make a full plastic brick only for…
This is my project of Ori Mothership as seen in the Stargate SG-1. It is around 40 cm long, consists of several pieces that come together like a lego. No glue needed. It has retractable landing legs so no pedestal is needed. I recommend…
Recreate the spaceX starship launch with this desk stomp rocket. With a good push I have managed to get the rocket up to 3 meters, how high can you go? ;) All parts printed in Bambu Basic PLA, when using different filament the tolerances…
Original model This remix is to be used with my starship S24 and the booster B7 . Description This pack replaces the following parts SS_Cone_Tiles_Black_x1 SS_Tank_Tiles_Black_x1 Flap_Top_Left_Black_x1 Flap_Top_Right_Black_x1…
This is the new SpaceX Starship as of 9/28/2019 with only 2 body flaps and 2 front flaps. If you enjoy my work please consider following me. I intend on updating this model from the ground up to meet the current design from SpaceX in the…
Updates 01/06/2025 Model available for free for everyone! 04/03/2025 Update of “Cone_Metal”, “Tank_Metal” and “Engine_Bay_Metal” parts due to poor export quality. Information This model is a new model based on the Ship S33 , as the…
Starship S25 model I made. The model can be printed as a complete piece, or as different pieces and glued together. Scale it to any size you'd like, I currently have it scaled to be a nice desk ornament for my office. Let me know if you…
Fluttershy from TV Serial My Little Pony Print instructions Printed from Prusaments PLA 4 perimeters infill 15% brim 7mm supports distance 3mm
This is a project where I designed and printed a model of the Mothership that belonged to the mighty god Apophis in the Stargate series. The ship comes with its landing platform and has one feature - those retractable pylons that were…
Changelog: Nov 30 - Added pegged bottom model that should interface with the top, for non-magnetic versions. Added trim option for an accent around the grille. Dec 1 - Added MMU versions. Dec 4 - Fixed Pegged pegs not pegging. Decreased…
This is Mark II of the Ori Mothership from Stargate. Visually the model looks much like the MKI, but it is redesigned in a way, that the only painting required is the engine glow. All the other parts are printed separately. It is one…
Marshall Music Logo was recreated with a Black outline.
This is my version of the Autobot Matrix of Leadership, from the 1986 animated movie. I've found several good versions to print online, but they all print in a single color. This model is split into individual components so that each…
Who keeps eating my Peeps? This is a two-piece print remix of my Peeps Marshmallow Bunny ! Print the marshmallow portion separately, without the fuzzy skin. Once printed, the two pieces should snap together, but if needed, a CA glue can…
A USA tank, The pershing Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0,3 Infill: 20% Category: Vehicles
For an extra magical touch, you can place a small LED tealight under the campfire to bring it to life with a cozy effect. You can find variations on my profile !
I printed a couple of 3DPmom's Rockets for my girls and was truly inspired by them. They were so simple and fun to fidget with! But I wanted something a little more realistic, so I studied her design and built this minimalistic version of…
.20 mm layer no supports New FDM bed adhesive: https://design-and-additive-manufacturing-services.square.site/product/p2b-weld/5?sbp=false Print instructions Category: Food & Drink
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Behold the ultimate mashup of music and miniatures – a Funko-style Marshmello model that’s ready to drop beats on your shelf! This quirky 3D print captures Marshmello’s signature look with an oversized head, minimalist mask, and a playful…
Based on the drawing https://www.deviantart.com/bugplayer/art/Fluttery-Walk-610501022 Print instructions The wings are separate pieces and have to be glued on. The tolerance for the interfaces is 0.15 mm. There is also a separate version…
This is a 1:144 scale model of the SpaceX's Starship upper stage! It measures 62.5mm in diameter and approx. 370mm in height! This is the “Block 2” version of the ship, featured on flights 7-9 (so far)! This ship is based on an early…
I used Meshmixer to cut out a few more spots and the nose for a multicolor print. Printing time about 21 hours with Prusa MK3S+MMU2S with PLA, 15%Infill. How I Designed This Category: Toys & Games
Need Your help A little quiz to help me improve : https://forms.gle/8pMP6aqDagzPb9aH6 Dimensions et Informations Elle fait environ 27 cm de haut pour 9 cm de large. Il y a 20 pièces à imprimer. Je l'ai imprimé en environ 17 heures. Le…
A few notes on the profile: I separated objects by color: body parts, blue stuff, red cloths etc. the head and the hat strip are the only multicolored objects (AMS) so are on separate plates from other parts The hat strip has enabled the…
I printed at 200% with a 0.6mm nozzle, but the original size should be very close to mini-figure scale.
I decided to redo my model a little - change the latch. For some reason I can’t print it properly. I also added one more ornament option.
1/400 scale model of the SpaceX Starship and Super Heavy. This one's designed to be robust enough that kids can use it as a toy, and prints in pieces so that if a part gets broken it can be printed again without having to redo the whole…
This is a very simple model of the Russian cruiser " Moskva " with an artistic impression of the hull damage she sustained before her sinking on the 14th of April 2022 . Printing Nothing special. Both models have slight overhangs but…
Although there are several models available on another site… I found them all to be unnecessarily too big and complex. Taking inspiration from Area51 's nice and minimal mount for Makita batteries, I set out to design something sturdy and…
Upgrade your Nerf Hammershot's power to the right amount for you with these different-sized spring spacers. This model includes 4 different sizes of spring spacers: normal, half-size, ¾ size, and EXTRA STRENGTH!! (I don't know if this one…
This is a 1:144 scale model of SpaceX's Super Heavy Booster, the first stage of the Starship rocket! It measures at 62.5mm in diameter and the booster + Hot Stage Ring is ~ 490mm tall! This is “Block 2” of the booster! Ship can be found…
Link to Version 2 of this Rocket: Starship Style Model Rocket v2 This is a printable Starship model rocket designed for use with Estes 1/8" rod launch pads, and Estes C6-3 motors. This rocket is a single stage version of Starship, the…
Very simple sushi-shaped containers designed in Fusion 360.
Experience the thrill of owning this iconic starship with this stunning 3D printable STL model that brings the galaxy to your desk. This meticulously detailed Imperial Shuttle features authentic triangular wing design, intricate hull…
These knobs are inspired by real control knobs on Marshall guitar amps . Come in 2 sizes: regular size and 200% size. They have 3.5mm diameter blind hole for M4 bolt or 4mm screw. But please be prepared to use drill, because these small…
Im uploading my reconstruction of the french battleship Gascogne. I used the World of Warships model as a visual reference, but I didnt copy any ingame content. The model is scaled 1:1. For 1:200 scale use the 0.5% slicer setting and for…
This is a remixed version of the Marshmallow Peeps Bunny design, now available as stud earrings. Key Features : Dimensions : 13.8mm x 27.8mm x 3.35mm Material : Printed using PLA Print Settings : Printed with a 0.2mm layer height, 15%…
Endless Sky is the open source remake of the classic Escape Velocity. It features a rather large amount of varied ships of interesting designs. While the ships appear as 2D renders in the game itself the renders are made from full 3D…
Test your printer while trolling Chris Pirillo. A special Peep remix of the famous 3D Benchy requested by @Pezliz. Prints without supports. http://www.3dbenchy.com/
I made this holder cause I had many holders for my ikea skadis which are great but aren't made for scissors. So I made this thing that on that scissors fit perfectly. I would strongly recommend using supports. And now enjoy!
INTRODUCING THE WHITE CYLINDRICAL HEAD OF DJ MARSHMELLO . ALSO A POPULAR CHARACTER OF THE GAME FORTNITE. I HAVE SUPPLIED THE HEAD IN 3 FORMS. - HEAD FOR MULTICOLOUR PRINT - HEAD FOR PAINTING EYES - HEAD WITH BLACK INSERT FOR EYES AND…
Starshade is origami created by NASA for deployable sloar panels in space. This is 3D printable version of it. Add a pause before 2nd layer during slicing. After 1st layer is printed, place mesh fabric , secure it with magnet or adhesive…
Rebuilt this cool pencil holder/desk organizer pretty much from scratch to make it easier to print (IMO). You can print the body in one piece. I rebuilt the mesh to fit the new body design, but kept the same design idea - print with no…
SpaceX Starship (under construction, im modifying heat shield, legs and adding detail to engines and fuselage) 1/100 Scale (50 cm.) the flaps are the same left/ right (aleron inf x2/ aleron sup x2) (redesigned hex heat shield) you wil…
A simple Marshmello helmet that fits over a standard MINI 13 head. The Deadmau5 head fits over a standard MINI 13 head, but will require the eyes and mouth to be glued. Printed at a speed of 50 mm/s with a layer height of 0.12 mm
Broke my gearshift cover. so i reconstructed it in CAD. Printed it with my Prusa Sl1 s.
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
My takes on the creatures from Ghosts of Saltmarsh are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the…
The head prints perfectly without any support. Printed 10% infill. The body I really struggled to print standing upright with tree supports. When it came to the hands, they kept popping out will printing. This happened at the exact same…
This is a remex of the excellent model by David Metlesits and FleetPrinter: https://www.thingiverse.com/thing:4614314 I have made it more easier to assemble by re-splitting it into parts and adding alignment pins so that the parts go…
Make friends and intimidate them with stupid-silly firepower why not? I've seen a few designs here and there for inline clips and I finally put a couple hours into my spiraled cylinder to get half darts stacked and firing. In brief: the…
SpaceX STARSHIP ARE Build Kit 1:200 Total high 69cm Glue is necessary Include: Starships - 5 parts Booster 7 - 10 parts Pad - 5 part Mechazilla - 89 parts Pins needed - 3x 5mm pin 12x pillar pin 8x 10mm pin
The color scheme is the following and the PLA i used in this print: 0.00-0.40: White (DasFilament Tonweiß) 0.40-0.80: Red (Fillamentum Ruby Red) 0.80-1.20: Grey (Prusament Galaxy Silver) 1.20-1.60: Blue (DasFilament Toms Infinity Blue)…
Original model This support is to be used with my starship S24 and the booster B7 . Dimensions and Information It is about 6 cm high and 8 cm wide. There are 24 pieces to print. I printed it in about 5 hours. Settings Infill: 10% Support…
Presenting the BonWasy CYBVRSHAPE table tennis adapter for Meta Quest 3 & 3S, modeled after the Stiga Cybershape paddle and the BonWasy ProTTed adapter . This is the most realistic feeling full sized 3D printable adapter available, free…
Starship shaped valve cap for Schrader and Presta valve types
Designed for Taekwando belts, but should probably work for others. Only print a row for the belts you have! Mini dovetail joints on the underside of each piece lets one keep printing for every belt they have. Import into tinker cad or…
This is a Remix of : https://www.thingiverse.com/thing:5345813 The original Model's Rotation Piece was to long and pushed on the front end of my Nerf Hammershot. I removed the pins that held the darts in to increase the power. Post…
Gearshift Dacia Logan Lever hole diameter 12 mm Software: PrusaSlicer 2.7.1 Perimeters : 4 Infill : 10% Brim : Yes Skirt : No Support : Yes Layer height: 0.2 mm Material : ABS If you print this accesories please share your make, leave a…
UPDATE (11-21-2025): Replaced cranberry which was 10X too large with the correct size. Special Note: MakerWorld user @HotFix has given their blessing to incorporate their genius idea of the pie tin and cranberry on the front of the turkey…
This Worx PowerShare 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. ***PLEASE…
I purchased some Solmore RGB Cabinet Lights (Model NO.:S-CL-003) and remixed the insides of the original matrix ( https://www.thingiverse.com/thing:326614 ) to fit. Tolerances are tight so glue may not be needed. NOTE: You must have an IR…
Here is a polished, professional Printables Description you can paste directly into your model page. It highlights features, printability, cultural inspiration, and technical notes—all optimized for Printables users. 📝 Description This…
A Multicolor remix (Open in OrcaSlicer)
Marshall pencil holder, desk organizer inspired by Marshall speakers design.
I have added the brakeman's compartment to my my previous version of the FS tipo "F" ( https://www.printables.com/model/181876-fs-carro-merci-tipo-f-ghkkms-spoor-1-spur-1-gauge- ) This one is constructed identically.
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full South Park collection here: South Park DeskBuddys – Full Cast Collection by CheekyTomato | Printables.com Rate, 🟠like & comment to help him move away…
Spare part for designed for Marshall's Adventure city fire truck, but probably will work for other Marshalls truck as well. Some of Chase's trucks has similar devices so i included one for them too. I have printed it split in a half using…
Originally Built by FrostyBird @ Thingiverse https://www.thingiverse.com/thing:5879291 Repaired in Microsoft 3D Builder Scaled to Standard Starship Model Scale 1:2500, 1:1400, 1:1000 and 1:350 According to production designer Dave Blass,…
Holder for Karcher / AVA washer accessories. Solid type Category: Tool Holders & Boxes
A simple set of organizer trays to enhance the default Farshore box insert. Print one of every file here, two of the card trays. Place empty punchboards underneath the plastic insert to ensure a tight fit. Design philosophy was to 1) make…
This is stand for my Matrix of Leadership model. The base is hollowed out to reduce the amount of filament required to print. You can add supports if you want, but it really shouldn't need them. Any bridging issues wouldn't be visible at…
