Counting matching models…
This is a variant on Dummy 13's chest and abdomen parts, giving it a more feminine build that is aesthetically consistent with the original design. These parts are a drop-in replacement for the ones included in the main Dummy 13 model.…
The source marked this model as adult content.
A P5 Joker Mask I drew up since I wanted to take a whack at making something more organic than the stuff that I usually make. I've made the eyes as separate components and thus they can be printed in a different color from the Mask Body.…
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
Do you like Managed Democracy? Well now you can spread it all over your local airsoft field! When I posted the original Backhammer kit for the PLR-16, people brought up its similarity to the Liberator from Helldivers, and suggested that I…
PFM-1 (противопехотная фугасная мина) is a Russian scatter anti-personnel mine. There is also a PFM-1S version, but it differs only slightly. The model consists of two parts connected by a thread (body and head). The head piece is…
Pill organizer / vitamin reminder with a labeled slot for each day of the week. To use, loosen the screw 1 turn and twist the lid to the current day. The lid & screw are fully removable to refill the container at the end of the week. To…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Grenade Launcher Airsoft Used screw: 3x25 for body 3X 3x15 for pistol grip 2X 3x10 for RIS rails 4X Used spring: D/d = 8/0.8 mm L=10mm or similar 3D printing settings Plate1: 0,2 mm layer 8 walls 30% infill no supports Plate 2: same as…
This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…
These are some armor pieces I made for the Dummy 13 figure by Soozaphone. I saw there were a few female armor piece remixes and I was not satisfied with how Dummy Thicc they made the figure look, also the embellishments felt like they…
6 different sized airsoft grip. Use 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. Very strong. You can also use fussy skin to give it some grip. I used 0.3mm fuzzy skin…
Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…
Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it. Maybe you've always wanted to mount your wisdom tooth to your…
The source marked this model as adult content.
Functional 3d printable airsoft ak body kit with folding stock. Uses standard airsoft ak internals. Includes stl and step files. Takes about 1kg of material to print. I desingned the model with 0.25 mm tolerances between each part.…
The Manticore is (to my knowledge) the first shell-ejecting blowback 40mm launcher in the world. It uses HPA to cycle short 40mm grenades (shells shorter than 90mm), and fires in semi-auto. I recommend printing all of the parts for this…
The Libra Classic break action shotgun, in 40mm form! Compatible with all standard 40mm airsoft grenade shells. All build instructions and files are below, including .f3d and .obj files for that sweet, sweet remix culture. In addition to…
Dies ist ein Waffen Ständer für mein Airsoft Gewehr. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Das Magazin ist völlig neu designed, inspiriert habe ich mich von den Magpull und ETS Magazinen. Zum verbinden des Magazins…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
100% Accurate Frame Model (for airsoft)
Brief History of the Karambit: The karambit was originally an agricultural implement designed to rake roots, gather threshing and plant rice in most of island Southeast Asia. It's a smaller variant of the Southeast Asian sickles. It still…
First attempt at making a 3d printable mask, will probably upload a modified version later… Make sure to scale it to around 1000%, 3ds max measurements troll. The renders aren't using any displacement maps, you will get the shape as is,…
A sci-fi cubic plant pot or planter for your plants. The design is inspired by the amazing Subnautica series! Mainly by the Precursor structures. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…
All the bearings use the standard 6mm Airsoft BBs. Ranging from 20mm, up to 200 mm (outer diameter), in 2 and 5 millimeter steps, and are 7.1mm thick . I don't even know what you could do with a 200mm bearing, but if you do, send us a…
Airsoft speedloader m4/ar15 You need: 1 m3x20mm 6 m3x10mm 6 m3x10-20mm 1 m6x20 1 m6mm nut 1 half pen spring Printed with: 0.4mm nozzle, 3 Walls, 15% infill and 0.16 layer height. Message me if the tolerances is too tight for your printer.
Wall Mounted Holder for Dyson Supersonic Hair Dryer. Need to prepare some magnets, please refer to the following URL link for specifications.…
The objective of this project was not to out perform the commercially available spring grenades, let alone the gas ones. It was mainly to test the concept and make a working airsoft spring grenade that doesn't use trap doors. That said,…
Dummy 13 – Feminine / Female Torso (by soozafone) – KitCard Hey maker! 👋 I’m a big fan of Dummy 13, especially the version with parts in a frame for easier handling. Since there wasn’t a framed version for the female parts, I designed…
This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one. Dimensions: 23 x 35.5 x 150mm The baffle…
Opening a door as a firefighter, law enforcement officer or emergency doctor can be a challenge sometimes- but KEEPING it open can be just as important. If you are tired of jamming doormats and trashcans into doorways then this print is…
Printing Instructions Print without supports and at 100% infill. If using PrusaSlicer, I recommend disabling “Thick bridges” and enabling “Detect bridging perimeters”. If you have assembly issues with the holes being too small, you can…
Reuploaded with most recent fixes and edits. Thingiverse and discord have all the old files if you want them. *PAAR stands for Printable Airsoft Assault Rifle duh This is a set of files to get a body of an M4 looking thing designed to be…
The front is fixed with one M3x15 screw and nut. (the front also have another two screws just for alignment), the fixation in the picatinny rail is made with a M3x30 screw and nut. Print with suport (touching buildplate).
*** 16/08/2023 added another version of the Blade.*** Hi there, I designed this knife to be used in airsoft. Therefore, for your own safety and especially the safety of others, print the blade only out of flexible materials like TPU. Not…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Sako style handguard airsoft ar-15. The one that is about/is introduced to service in Finnish(13" long) and Swedish(9.5" long) armies. Use as is or with upper, (green and brown in pictures)…
Introducing the revolutionary 3D printed Flex Person Keychain! This unique and customizable accessory combines cutting-edge technology with personalization to create a truly one-of-a-kind item. Crafted with precision and attention to…
I created these parts to mount an Anderson Power style (SB50) 50 amp connector on the side of a battery box build. It is comprised of two components, the base plate and the top cover to house the SB50 plug. The components feature a small…
When doing electronic projects there always is the search for a housing. There are plenty on the market but rarely fit the exact size and usually can not be considered cheap for some molded plastics. In addition much mechanical work needs…
Hydra mount Remodeled to be stronged when 3dprinted and easier to print, made for airsoft Uses m5 nuts and bolts(at least 30mm)
Angled airsoft grip. Use 2 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. No need for support.
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
This mine is a continuation of the PMN mine series. It is similar in appearance to the PMN-2 mine. The main difference is the screw on the bottom of the mine, which can be used to adjust the self-destruct. The PMN-3 mine is NOT a…
Original file from MeowCha on GrabCad: FN FAL | 3D CAD Model Library | GrabCAD The OG file was just one big stl file. I separated all the files on this one and exported each of the parts. I also included an f3d file of the original file…
This is an easy-loading reel for developing up to 6 sheets of 4x5 film with a standard Paterson system. Sheets are slid in via the entry slots and are kept in place with keeper tabs on the top and bottom. This design was inspired by the…
A dry brush texture palette that fits into the cover for a Masterson's Sta-Wet Handy Palette. 165mm Square, 5mm deep. This will fit on a Prusa Mini bed. Feel free to scale it up or down as needed, or let me know if one of the patterns…
Toy Binoculars for Kids Coudln't find any good toy binoculars with eye spacing that worked for kids, so I made my own. I copied some aspects of a few different binocular designs I found out there. I modeled the support piece in already.…
Other requirements: 1. Gearbox (would be ideal but could also be used in a different way) 2. cylinder with no holes. 3. arduino or other fire control unit . (will work without it, just not efficiently at all.) 4. Air valve (I used one off…
For best durability print in TPU, and for more fun in PLA ;)
10X10cm target holder with a bullet recovery system (if you are an acurate shooter of course ;-)) porte-cible 10x10cm avec un système de récupération des billes (si vous êtes bon tireur, bien sûr ;-) ) Print instructions Category: Sport &…
Turn a spare 120 mm PC fan into an unobtrusive desktop breeze. This low profile stand slides beneath most monitors, aiming cool air straight at you. Id recommend to pair with Noctuas NV-AA1-12 Airflow Amplifier that you can print…
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
Integro los archivos f3d en fusión para que puedan personalizar con sus propias frases o nombres, ideales para la familia y poner un negocio. La licencia es libre para apoyar a la comunidad y puedan emprender.
I made this project way back in 2016 and it hasn't been updated since originally posted on Thingiverse. Hello, everyone! First of all: English is not my native language. And second: This is a work in progress thing. This took me a lot of…
Joker's weapon from Persona 5 and Smash Bros. The scale is kinda weird because it differs depending on the game (Smash or P5). DO NOT PRINT THE pegv2.stl™ AS IS UNLESS YOUR PRINTER HAS 0.00000... TOLERANCE!!! SCALE THEM DOWN! I might…
Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Thread Specification : M12x1, 8.5mm long; I use it on my M1911 pistol, although I'm not sure if they all have the same thread. Modular Design :…
The new Carbon 13 figure is great, but the exposed connector in the torso was bothering me in an otherwise completelly smooth figure. So I decided to adapt the torso from the Frame Arms compatible kit I had published previously, with…
Silenziatore modulare che può fare sia da silenziatore vero e proprio, sia da prolunga canna... Esternamente è 35mm di ø, ed è lungo 80mm. Il vano interno è 30mm di ø ed è lungo 70mm. Adatto per essere inserito in repliche con handguard…
🌘 Las lámparas de luna 3D son regalos personalizados perfectos para hacer con impresión 3D. En este video tutorial os enseñamos el paso a paso de cómo poder imprimir tus propias lámparas de una forma muy sencilla. Ya no tienes excusa para…
This print is designed to be printed in two parts, one part either painted or printed in black filament, and then superglued together. I did this so I could print this on my single-filament printer, since I don't own multiple filament…
I printed from PLA and PETG. To save filament you can reduce the density of the filler to 5%. You will need external material to make it up. You need a wire (one that won't break when bent) that you attach to the underside of the liner…
Taser Dummy with changeable cartridges. i used m5x35 screws and with m5x10x7 Plastc inserts Print Settings Printer Brand: Creality Printer: Ender 3 V2 Supports: Yes Resolution: 0.28 Infill: 10% @ 3 shell, 5 top/bottom Filament: Das…
This is a simple pistol holder. I tested it with a Tokyo Marui Glock, a CZ P09 from ASG, a ICS BLE Alpha and a HK 45 Tokyo Marui. Do not use it with a High capa. I'll post another version later. Do not hesitate to list other compatible…
A tightly wrapped person Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Print video: Cloaked man - supportless FDM print - YouTube NOTE other…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
Low Profile Mount for Airsoft tactical helmet that can holds the camera from below. Printed with 0.20mm layer height using PLA without supports. Wall line count set to 2, with top and bottom layers at 3 using a Zig Zag pattern, 25% infill…
'Stylised' (ie. not 100% accurate) reproduction of the Colt Paterson 1836 modelled in TinkerCAD using parts from https://grabcad.com/library/91991. Plugfire components are the original Paterson parts, Cartridge components are what parts…
Currently very frequently used anti-personnel mine in Ukraine. It consists of five parts. I printed from PLA and PETG. The ring around the mine, which is otherwise made of metal, I printed from PETG to make it more resistant to mechanical…
Remix (what I changed) I added two slightly different target patterns to each of the targets, as to allow for more precise aiming and a deeper, more refined practice. The pattern has a height of -0.5mm, as to make the pattern easily…
It's a 0.15" hole, meant for a screw bushing I also added just the rail, [so that people could add the railing to their existing dust covers. It is a 0.15" hole with a 0.25"(width)x0.1"(depth) bore head] and just the dust cover
A Triangle Grip and Screws for M4 Style Rifles that use the M-Lock System Works really well on my Novritsch SSR4 DONT TIGHTEN THE SCREWS TOO MUCH OTHERWISE IT WILL CRACK! My Print Settings: Layerheight: 0,25 Material: PLA Brand: Prusament…
Update: added an optional taller version by request Why I have T1-style red dot that sits very low on the rails of my airsoft replica's. This print raises your sight by ~32mm which is perfect if you're using goggles/helmet/mesh covers.…
Model with supports for the chin, gradually smaller layers for the head and seam at the back. Thanks to the “Scan the world” project for the scan.
This is a replica of a real steel suppressor, that could house the Acetech or Xortech Mini Airsoft-Tracerunit. There is a long an short version with a crown or flat end. Keep in mind, the crown version is better to be printed on a resin…
8cm cookie cutter and Stamp of Gingerbread Man / Person, Can be printed together to save on space on your print bed or seperated.
My attempt was to make this M79 model realistic as possible so you could used it for Vietnam war events or as just a nice pice to your collection. Model has realistic manufacturer markings and imitation of the cocking mechanism under the…
Bear - Oso - Orso - Ours 3D model
Holster for AEP CYMA Glock CM.030 Mount for Molle or 50mm belt Used material screw: - M4x14 DIN 7985 - M4x8 DIN 7985 - 2x NUT M4 DIN 934 - 2x M3x10 DIN 913 - spring from pen diameter 4mm I recomend to use ziptie to belt mount like on…
Why I wanted to mount my actioncam upside-down under my airsoft pistol, using metric nuts and bolts and a bit of plastic. This is the result. Features Mounts on your everyday RIS/Picatinny 21mm rail Uses metric nuts and bolts Used the…
Silenziatore modulare studiato per essere un silenziatore effettivo con 7 dissipatori di suono. Rende il suono emesso di fronte alla replica pesantemente otturato, trasformando gli acuti e i suoni alti in bassi. soprattutto è grosso e…
You can edit text with free software Autodesk Fusion 360. To edit text download .RAR file and follow instructions in HOW-TO PDF. Personalized Christmas Card is suitable for C6 envelope 114x162mm. Tips: - Print STL file if you do not want…
A customizable keyring in the style of a EU/UK/GB number plate. These are perfect for labelling your keys, bag and other personal belongings. Use your slicer's 'pause at height' or 'filament change' feature to create multicolored keyrings…
Print half mask first and then the other half. I'm quite proud with the result, will print it really soon. Add supports and scale it to 1000%. Remember to mirror for the other half mask! If you plan on printing the full mask, point the…
This should be reusable, I would recommend PETG but pla has worked for me, just not for very many tries.
Airsoft QLS plates compatible with Safariland or Cytac/Amomax via adapter The male and female plates were remixed from (https://www.thingiverse.com/thing:3827837). Print settings: 25% infill 6 walls @ 0.4 or 4 walls @ 0.6 PLA or PETG 0.2…
Organizador de cables modificado a partir del realizado por el usuario DFV Tech Los cambios que yo he hecho han sido los siguientes: He escalado al doble cualquiera de las versiones Normales que podréis encontrar aquí No subo el diseño…
Splitted design for easy modyfication in Slicer I set the blue one to print at 5 mm/s speed, to make the overhangs looks good But I also include not splitted version --- Commercial Use --- By purchasing this design on Cults , you support…
Llavero para personalizar Llavero con nombre para personalizar. Hice estos dos de ejemplos, pero si te descargas el archivo enlace.txt, en el podrás ver el enlace de mi web de tinkercad para modificarlo. Características: Impreso en PLA…
This is an airsoft model only, designed for an AAP-01 extending its original front part allowing a 200mm inner barrel. 2026.08.20 - Mini version extended 8mm to better fit with 130mm stock barrel Added Mid version for barrels of 160mm…
I did not like the look of commercial available Tracers so i designed my own. Housing for the Begadi Tracer Unit (00821110SET). 14 mm CCW Thread. For the best fit and look print with Resin, FDM works as well. If you need other mounting…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
Hello there, I've designed this silencer so i can keep stock SRS .300 and .338 muzzle brake on (24mm cw thread), even if i have additional long 14ccw suppressor for my SRS A2. Don't mind the quality shown on images, my printer is kinda…
