Counting matching models…
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Print using PLA or PETG. Add a M4 screw with butterfly nut. For the centering pin I used a 3mm old drill bit which I cut to size (about 10 mm) and inserted to the base by heating it first. You can view the Onshape design at…
A 3 - 5mm drywall screw is required to attach.
I use this adapter on my Makita RT0700C. It's inspired by these models: In-line Neutrik PowerCon socket Neutrik Powercon powercable adaptor (thingiverse)
Okay, so I got fed up with the tool mounts available, and did this one. It's printed in 2 parts. One is the arm that holds the pen. It covers a 45° arc and has 2 thin arms that should be flexy but keep the pen parallel to the cylinder…
The original thing has a lip around the bottom which is great for the Primo, not so much for the LowRider with the Makita clip mounted to the plate. The mount is too flexible, allowing the pen to wiggle when mounted that far from the…
This design collects dust when flush trimming, chamfering, or routing round-over edges with a Makita RT0701C. Standard attachments require completely removing the router sub-base for installation and removal; this model fits underneath…
Makita router attachment (RT0701C series) for bottom dust extraction. An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. It covers the cutter and its work area, extracting dust directly from the place…
For more stability I have merged the MPCNC Tool Mount with a Makita Tool Holder. It fits with the 25mm version (metric). This Tool Mount can be used for MPCNC Burly and also for MPCNC PRIMO. Using 2 parts connected via screws resulted in…
I lost my wrench for the router, so I created this one. It fits snug over the nut and allows you to spin it off quick. I have two versions one is thinner and one is “chonky”. no supports required to print.
While building my own DIY CNC, I needed to cut some T-slots on the table so I can fix some clamps. I decided to design a new base for my Makita RT0701C so I could cut the slots equally spaced 3" apart. In the process of designing the base…
