Makita RT0701C Trim Router: Threaded Side Cutting / TSC - Lock Nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom threaded side-cutting dust shroud with an internal lock nut for the Makita RT0701C trim router.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design collects dust when flush trimming, chamfering, or routing round-over edges with a Makita RT0701C. Standard attachments require completely removing the router sub-base for installation and removal; this model fits underneath the base and secures from the inside using a threaded lock nut.
Leaving the lock nut slightly loose enables 360-degree rotation of the dust port as you work to keep extraction hoses out of the way. An optional support STL is included to assist slicers with the outer ring overhang during printing.
Dimensions
Height below base: 1.4"
Threads above base: 0.4"
Total Height: 1.9"
Outer Diameter (OD): 1.37"
Inner Diameter (ID): 1.055"
Middle Ring Thickness: 0.1"
Print Settings
To withstand suction forces and hose strain, high structural density is recommended:
Layer Height / Resolution: 0.15mm – 0.20mm
Infill: 50% – 100% (Gyroid or Grid recommended for torsional strength)
Supports: Turn off auto-separation settings in your slicer. Import support STL along with the main body, align and center both models, and assign the support geometry as a modifier/support mesh.
Explore More Workshop Upgrades
Browse my full catalog of custom adapters, dust collection fittings, and workshop jigs here:
Workshop Tools and Jigs: https://www.printables.com/@DPs_Designs_4882792/collections/3599922
Workshop Dust Collection Fittings: https://www.printables.com/@DPs_Designs_4882792/collections/3599928