Counting matching models…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
Made in PLA, For Lego technics BMW S1000 RR wall mount. added a hole to mount the description plate Printer settings recommended 25% infill 3 walls. Support: yes Brim : No About 105gr of filament
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Cover that ugly shiny part of the frame with this simple black plug. This is for the S1000R 2021 and up Printed with Bambu X1C (default-ish settings): 0.4 nozzle 0.24mm Draft 90% infill
Nice model of the BMW S1000XR motorcycle
A little BMW S1000 Keychain. Length: 54mm Width: 8mm Height: 3mm
You have a S1000R (2021 and up), looks amazing! You are bored of your current wind guard (or you don't have any yet), but you don't want to pay ungodly amount for a small piece of plastic? Look no further. With this tiny little thing…
Gabarit guidon BMW S1000rr Permet de contrôler l'alignement des demis-guidons Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Doesn't Matter Resolution: 0.25 Filament: Prusament Petg / PLA Category: Automotive
Print instructions 0.6 nozzle 0.2 layer height 100% infil 3 perimeters Print on side Supports required on overhang only Inserts are made of aluminum, use silicon grease
Der Lochdurchmesser des Halters ist 6,1 mm. Zur Wandbestigung habe ich eine Spax-Schraube in 6x120 mm benutzt. The hole diameter of the holder is 6.1 mm. For wall mounting I used a Spax screw in 6x120 mm.
Adapter for SW Motech PRO tank ring system to BMW S1000XR 2020+ top-case holder. You need to buy a BMW S1000XR SW-Motech tank ring separately, this is a top-case holder adapter only. Thread inserts are M5+M4 KVT Microbarb Print…
Smooth surface allows for customization or sleek look that blends with the rest of the bike. Printed with Black PLA on smooth build plate to allow print to print flat with smooth surfaces and no supports required. Install with M6…
You'll need two (2) pieces.
Replacement foot for Rigol DS1000Z series oscilloscopes (ds1054z, ds1074z, ds1104z). The angles, dimensions and the flappy action are similar enough to the original feet, so you can just replace one of them. I also used a 2mm steel axle…
These are probe holders for Rigol RM-DS1000Z rack kit. 4x M4x12 or M4x14 countersunk screws are needed for mounting. Designed for RP2200 probes.
The signal generator is a useful tool for the electronics enthusiast's work bench. You can spend a lot of money for a powerful signal generator. The UDS1000S series of signal generators are feature rich and low cost. The module is readily…
I only use the side cases twice a year. The rest of the time they just collecting dust on the garage floor. So i made a wall mount to mount them on the wall of the garage attic. Screwed in the wall with 2 M5 screws, if you want you also…
When you use the retractable feet to tilt the instrument, the oscilloscope tends to slip or the feet collapse. With this model, you have the same angle as with the retractable feet, while the entire instrument is stable. You can also…
A travel case designed to fit the Kingston XS1000 along with other devices. Small and sleek, protecting against physical damage. Space for: 1x Kingston XS1000 (or another SSDs no larger than 34x15x72 mm) 3x Micro SD Card 1x SD Card 4x…
This is an Holder for a Powebank. I designed this to be used with the LucidVR Gloves. There are 2,5mm holes in the model in which M3 Threads can be cut.
I'm updating a Timex Sinclair 1000 and wanted a nicer case (the original shows a bit too much damage). Sagittario modeled an amazing ZX81 case and generously shared his model source with me. He even moved the video out port to match the…
Hey, as there was no model available and I didn't want to buy the original race covers, I decided to design some myself. These are mirror hole covers for an S1000RR K67. You can reuse the nuts from the original mirrors but will need some…
Wall holder for Philips shaver series1000. It can be charged while hanging. 2 M4 screw slot. Printer : Ender3 V2 Neo Setting: layer height: 0.2 perimeters: 4 infil: 20%
Made this because I was doing my first gridfinity in my kitchen battery drawer but couldn't find one for my chargers (we've got a couple of these). Figured it wouldn't be difficult and I'm pretty happy with the results. Holds the charger…
Did this part for a friend, now sharing it with you all. Model at photos is printed with Creality Hi, PETG.
BMW S1000RR Hepco & Becker sportrack mounting clip (2019 - 2022) Unfortunately the sportsrack mounting requires the bracket to be bolted to the rear subframe which whilst secure is inconvenient. This bracket bolts to the underside of the…
Lets be real, nobody wants to open up the passenger seat to get your disc lock out and BMW did not give any room or a mount option for a disc lock. I got tired of having to take the back pack off or put it on with the helmet on. If its…
Aftermarket LED headlights stick out farther than stock, so the original cover won't fit. This offers some protection... Print Settings Printer Brand: MakerGear Printer: MakerGear M2 Rafts: Doesn't Matter Supports: Yes Resolution: .2…
This is an upright holder for the Intenso S10000 Powerbank which isn't produced anymore. This holder has generous tolerances but still holds.
This is a remix of Devon Goldstone's Rigol DS1104 wall mount brackets. See the attached quick&dirty OpenSCAD file, if you dare ;)
Do you have bar-end mirrors on your S1000R (2021 and up), great look! But now you are stuck with those antenna looking ugly pipe clamp things where the original mirrors used to be. You managed to get rid of the left side because there are…
Print with 10 walls ABS or ASA for better heat resistance and strength. Dont make it with infill as it will be weak. If its ABS you can vapor smooth it or paint it also. Don't do it with PLA is its weak and will bend with heat.
Oil filler cap tool Now with a tidy wrench version and a bonus thumb tool version
PLA/PETG/ABS/ASA Print on side Support No Brim Infill 30-50% Small = 154mm in total Large = 167mm in total
This is a clip-on mobile phone holder for the inCondi S1000i exercise bike. While it does generate more support, attempt to print the model in such an orientation that the snap-on clips are printed with the grain lengthwise (aka…
Do you have a S1000R (2021 and up)? Great bike! problem is, thieves think the same! so now you have to cary a brake lock or a chain with you to lock your bike. Unfortunately the S1000R doesn't have much space to stow a lock on/in. If…
BMW S1000R fork guards 2014-2020 needs 6 3mm button head screws. I printed in PETG and tri-color PLA. 15% infill and 3 walls on my XL. Open and slide the upper thicker fork side first. Then slowly slide the rest of the fork into the…
These power station die often, the battery is reusable. The BMS mounts in place of the inverter. I used 4 x M3x3.5x4.6x6 threaded inserts.
DS1054z to 2020/vesa adapter Basically that, its very tight, you may need to reduce the "back tooth" a tad, you may not (it fit for me but very tight) I had originally made the little back tooth to allow for more rigid mounting by ramming…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
Zur Montage des Zylinders müssen die Kolbenringe komprimiert werden, damit der Zylinder aufgesetzt werden kann. Es werden 2 Ringe benötigt. Besser jedoch 4 Stück. Das macht die Montage noch einfacher. Bei der Verwendung von 2 Ringen…
My vacuum broke, so I made a part to fix it. My wife still isn't impressed. You'll want to trim off the original material around the clip, leaving the top section. I also drilled a hole through the section at the hole in the print as well…
Da bei größeren Touren mit GPS/Puls Mitschnitt der Handyakku doch gerne mal schlapp machte, suchte ich nach einer praktischen Lösung für Scooter & Fahrrad. Ich fand nichts! Daher nun dieses Design, bei welchem mir ein Freund am Ende bei…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
My vacuum broke, so I made a part to fix it. My wife still isn't impressed. You'll want to trim off the original material around the clip, leaving the top section. I also drilled a hole through the section at the hole in the print as well…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
All in the title. I printed variable layer height .2-.07 in PLA. no supports needed for the back case, printed face up. Front case printed face up with supports.
BMW s1000r Ersatzteile LED Lichtabdeckung, Kappe, Umbau, Tuning, Anpassung. BMW-Ersatzteile für Ihr Motorrad. Ersetzen Sie beschädigte Teile oder verleihen Sie Ihrem Motorrad mit diesen Tuning- und Styling-Teilen einen einzigartigen Look.…
![BMW Oil tool - S1000S/XR [M]](https://media.printables.com/media/prints/d02dc246-fe2c-48d7-807b-2f0f9a93c3e3/images/11914790_5ed43df3-135b-4e3f-95c6-40df5902d968_9f8f5dc9-3ab5-44d8-833a-a868a1a34aa1/screenshot-from-2026-02-02-19-50-30.png)
