Counting matching models…
This is a case I designed for my S21 Ultra. I was not happy with the few printable models I found online for the S21 Ultra. After I made 5 prototypes I discovered that TPU was super slick in the hand so I added the honeycomb texture to…
Designed in Fusion 360 for Galaxy S21. Needs supports “everywhere”. Print it in TPU with around 8% infill and it will have a nice squish to it. Included the f3d file if people want to tweak the parameters Update: Added my 3mf file so…
Case for Samsung Galaxy S21 FE (5G). Printed with TPU 95A Update V2: Added a v2 file where I removed the bit around the volume buttons to have a better access to the buttons. V1: Support recommended for gap around volume buttons at the…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Note: The model does not include the “MR” logo shown in the picture. The uploaded model is just a flat back. This case fits the S21 Ultra perfectly (at least with a flexible material--I printed with 95A TPU). It extends above the screen…
This is a small SSD mounting adapter for my Synology DS218+. Theoretically this should also work for other "slot"-type drive cages. Note that the latch is missing the little pin on the front. Original source for the adapter plate:…
This is a remodel of another case found here on thingi. I modified it to show off the camera module more and change some clearances to fit better after printed on my ender 3. There's also a version (v.3) that is connected between the top…
Having owned an S21 for some time now, I was disappointed to find that I could no longer buy an original case for it. So I decided to make one.
This is a remix of the Samsung Galaxy S21 Phone Case by LeeoNardo on thingiverse. It was made to be made of plastic, but I made it to be printed in tpu. When I printed it it fit well.
Ever wanted to have a beefy case to match your beefy phone? This case is for you! This case is designed for people who want to see their phone die from old age instead of from hitting the floor, using think walls and large lips to keep…
Introducing a minimalist and functional case for the Samsung Galaxy S21 , designed to offer optimal protection while maintaining a sleek look. This case comes in two variations : one with a microphone cutout at the top edge and one…
Simple case for S21. Project made for TPU; print with supports.
Samsung Galaxy S21 5G Case. Presenting the Samsung Galaxy S21 5G Case, printed using BambuLab P1P and BambuStudio with a fuzzy skin option to provide an improved grip while holding the phone. (printed both settings on 0.1mm to achieve…
This is a remix... but I can't find the original model anymore :/ Version 1 is with hole for charger (not tested) Version 2 does not have a hole for the charger (to prevent dirt from entering the port, it charges wirelessly) Added .stp…
Vibration dampening support to be placed under the NAS's square foot. May fit any model that uses the same 13 mm side foot. To be printed in TPU - for my usage, with only one “heavy” 3.5" hdd installed printing it with two walls, 0.2 mm…
Druckbare Handyhülle für das Samsung S21 Ultra 5G Sollte mit TPU welches einen ashore von ca A85 gedruckt werden
You are very welcome to experiment with the first layer pattern. ‘Octagram spiral’ and ‘Hilbert curve’ are my favourites for this purpose. Printer settings: Filament: I recommend using PETG, ABS, PLA. Avoid Flexes as they will be very…
Free for all. Engineered for performance. Let’s mine silent. ⚠ Experimental Status Use the gasket (Printed in PLA or PETG) to verify the alignment of the holes. And let me know if something needs to be changed! I have used this model:…
A case I made for my S21 Ultra... I made the back blank so you can emboss any design you want on the back. Print Settings Printer: Ender 5 Plus Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Ramberry TPU Black Category:…
I wanted a box to store the DS213 pocket oscilloscope that had the same size & shape as my TS101's box. I also made a stand, this can fit under the probe tips, it prints in one piece mostly, but there are two small “cubes” that can be…
I have added a cut-out for the microphone, which is located at the top of the frame. PETG can be a bit slippery, so my tip: print it on a rough PEI spring steel plate. This way I was able to create a fabric-like feel. Feel free to leave a…
This is my attempt at a dimensionally accurate model of the S21. I used it as a tool to make a case. I have included the .stp in "case" you would like to do the same. The .stp and .stl files should be pretty freaking close to the actual…
A Simple Holder for DS218 and DS218+, DS220+, and DS214Play. DS216+II Print Settings Printer: A30 Rafts: No Supports: No Resolution: 0,22mm Infill: 25% Filament: Janbex PLA RED Post-Printing Mount it to the Wall I recomend to use Screws…
the mag safe socket is 1mm deep. doesn't offer much protection but still does his work
I designed this support to hold my phone in my car because I couldn't find what I had in mind ;-) Fit the Mercedes Command Audio Screen (not touch screen). It is designed in two part with a dovetail for assembly. The frame can be equiped…
A remixed version of Manz_906945 which now includes a honeycomb/hexagonal pattern.
For PLA or ABS material, use "CUT" version. More S21FE cover models and STEP files on Patreon Print Settings Printer: Prusa Bear Rafts: No **Supports:** No Resolution: 0.15mm **Filament:** PARTX PLA White Notes: To have a nice first…
Synology DS218+ Dust cover 群晖DS218+防尘罩
I print the one that is used with the SolidSuit with an adaptive layer height from 0.12 to 0.2mm to save approx. 2h (compared to a full 0.12mm layer height). I only print the stand for smartphone with RhinoShield SolidSuit because I never…
print with no infill, all perimeters. should be ok in pla and definitely works in PETG
Gedruckt wurde auf einem Prusa MK4 mit 0.4er Düse, PETG. Kein stützen erforderlich. 08/2024: Ich habe die Version mit Sonnenschutz überarbeitet und verstärkt da sie sich bei starker Sonneneinstrahlung verzogen hatte. Sie wurde krumm. Mal…
A simple shelf and plate for the Synology DS215j NAS to fit into a 10" Mini Rack. The size of the opening for the NAS is 101mm x 161mm - this may work for other similar sized NAS units but no guarantees. Smaller printers like the Ender 3…
This case prints in place and needs no supports. I Printed this on my Core One with the 0.1 fast detail preset for prusament PLA. The buttons still need some work. While usable they have to be worked free first and jiggled around a bit…
Simple TPU phone case. Print with supports. If original does not fit using material harder than 85A. Scale model up to 82.8mm in X-axis by 163.8mm in Y-axis for a better fit. In my experience with this model, the original fits just fine…
Samsung S21 FE Car Holder Brodit System AND Spigen Tough Armor Cover (see pic) Category: Other
This is a Synology DS218/DS220/DS224+ Stand to reduce noise and vibration. It also helps with better ventilation. You need door seal stripes at the bottom of the stand with a 9mm width. I used these:…
Additional hardware needed for assembly: 2x M3 nuts, pressed into the lid, to minimize wear from the plungers. 2x 5x6mm (Case Diameter x Height) spring loaded ball plunger (Bambulab FB004), pressed into the base for lid retention. Print…
This is a replacement part of the Mercedes W213 Wagon Trunk/Boot luggage compartment hinge (plate cover under the trunk carpet where the first aid kit, triangle etc. is stored). I had one already broken and broke the other one wery…
ES210X-M2 10" Rack mount I recently upgraded the networking in my house and needed to get the clutter cleaned up. Enter the 10" rack. This is a VERY tight interference fit, designed to not need screws to lock the switch in place. Make…
This is a phone holder that I designed for my own Samsung S21 Ultra. It is thinned at the back so that a wireless charging plate can be attached if needed. There is a cutout for the speaker at the bottom. It can also be used lying down. I…
Die Halterung klemmt die Wurkkos TS21 Taschenlampe (Außendurchmesser 26mm) fest an einer ihrer Rillen. Für die Klemmung kann eine erhitzte M5 Sechskantmutter unten in die seitliche Klemmung gedrückt werden, sodass sich die Halterung mit…
I printed on its back without supports
A camera rig cage for a Samsung Galaxy S21 mobile phone with bonnet lens/filter mount and cold shoes for lights/mics. It also has cutouts for gluing in two ¼"-20 nuts to mount a tripod/monopod or a smallrig-style handle. This should make…
A german translation can be found after the english one And another adapter for the Metabo KGS216 to osVAC M32 ... :-) There are already one or two models for such an adapter, but somehow I couldn't find the right one for me. Sometimes an…
Eine Handyhalterung für das Auto im Getränkehalter ( Samsung S21 5G mit Hülle). Auf Wunsch kann es auf jedes Handy angepasst werden.
TPU case remixed for the magsafe ring. A friend wanted a 3d printed case with his phone, but I lacked the magnetic ring, so I remixed the model to have the space to insert a magsafe ring. Also, I strongly suggest to use Fuzzy skin because…
a case with card holder for the Samsung s21 fe
Ich habe den Adapter für meine Makita DLS211 erstellt.
support for wireless charging base and cell phone
I use this phone holster in a clean room. I've designed holes in the bottom for particle reduction and as a drain in wet environment. 2" belt loops. PETG was used at 0.2mm LH. Printed vertically on a Prusa MKS3+ and Sovol SV06 plus. , no…
Ich habe im Auto das Brodit Handyhalterungssystem und die dazugehörigen Schalen bisher jeweils passend gekauft. Das Problem war, eine Handyhülle war nicht vorgesehen bzw. der Ladestecker passte dann nicht mehr. Dieses Modell passt. Es…
Two easy-to-print hooks for adding an additional drive - WD Passport - to your Synology DS218 server. Add adhesive felt pads and everything will sit tight.
This 3D printed accessory is designed to facilitate users who have purchased the MINIWARE TS21 precision soldering iron
Milwaukee Table Saw miter slot gauge adaptor, for mounting of digital/dial gauge - To be used for blade/fence alignment.
Remix of this ( https://www.thingiverse.com/thing:2957181 ) Diffuser for Convoy S series (high resolution version), so it can fit on my Convoy S21A. I recommend reading Summary of the original project. I don't think it's needed, but I…
More space for your DS213. I found i very hard to fit everything in the original design, so i made a bigger box. It also fits every additional equipment and the manual. This is a remix of the orginal:…
Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3 and its Power Supply. With this flange you can easily hang it on the wall or anywhere else. Creality Cloud…
Remixed Savoia S21 Folgore (movie: Porco Rosso / Red Pig). Designed by Pierre GENTIL (FMS Model) https://www.simpleplanes.com/a/Zt8k75/Savoia-S-21-Folgore-Porco-Rosso-Studio-Ghibli Source:…
I searched but could not find a decent case or the Samsung Galaxy S21 5G so I designed one myself in Fusion 360. The buttons are “print in place” and work surprisingly well.
I have had 2 Eufy S210 doorbells die due to rain (replaced by warranty luckily). I had enough and created a cover that diverts the rain away. Been used for 1 year now and not had the doorbell fog or have any issues since. Recommended to…
This was printed in tpu at 240 c 60mms with a 55c print bed temp. may take 7-8 hours with 60mms. The photo is a mix of different models that i super glued to the case for a custom feel.
Replacement part for the Miele S2180 S2111 S2121 Vacuum Cleaner. Do not try to print this in PLA. At least PETG is required or the clips will break. Remove the hose from the original connector without cutting it. Gently push the hose into…
I decided that I don't want a bland smooth case for my phone. I love Witcher games, both computer and LARP. So here it is, remixed from two good sources. Category: Mobile Phone
This file is a phone holder for the steam deck. Currently this is set up for my phone which is a s21 ultra with the case
Remixed the original model by Ginty from Thingiverse. - Added charge port clearance - Added power button clearance This improves usability.
ATTENTION: this requires mirroring on the x axis. This is like the 20th version of this case for me. I am really happy with the fit. It should not require any scaling or adjustment. At least it doesn't on my ender 3 v2. The back of the…
My KGS216M is an older version with different shape than the current version.
Printed in PLA with Hilbert curve top face.
PRINTABLE ON PRUSA MINI DS212 Portable Oscilloscope carrying case with removable insert tray for accessories. Hardware required: 4x: 8mm x 3mm magnets 2x: M5x16 bolts Fits one DS212, one probe, hook attachment, and charging cable easily.…
I wanted to create a simple adapter/sled that fit around the Galaxy S21 FE phone inside the Gamesir X2 Pro Controller so that it looked nice and clean. I printed the adapter vertically on it's side with a brim and organic supports. For…
My first model, simple and overkill, but effective. Takes about 1.5 hours to print, print two for both ends. Print in TPU without supports, with the following parameters: Material: CR-PLA_1.75 Layer Height: 0.15mm Wall Line Count: 3 Top…
PROJEKT CENTRIPHONE PRO Samsung Galaxy NÁVOD Stáhněte si model držáku na telefon a vytiskněte na 3D tiskárně. Veškerá nastavení tisku si upravte pro potřeby vaší tiskárny podle vašich zkušeností. K držáku připevněte tenký rybářský vlasec…
This is a 3D printable adaptation of the metal Savoia S-21 model sold to the Ghibli Museum (last photos). For manufacturing I used a layer height of 0.16mm with a 0.4mm nozzle for size 4, and I used a layer height of 0.1 with a 0.2mm…
Simple desk or tabletop soundbar stand for Hisense-HS2100 soundbar, this is designed with a slight tilt up . No supports are needed with this model and should take approximately 1.5 hours to print at 0.2 with 20% infill, depending on…
took inspiration from : https://www.printables.com/model/1332736-fosi-audio-zk-tb21-amp-frame decided to make one for XY-AS21HPA (TPA3255 AMP)
Diffuser and cap designed for the Convoy S21A flashlight. The cap prevents blinding other cyclists and drivers. The diffuser disperses the light from the flashlight so you can use it as a lamp. 3D PRINTING SETTINGS: Material: Creality…
Rugged box for flashlight Convoy S2+ and S21A printed in Creality Hyper PLA, seal printed in TPU/TPE 20D. The box in the photos is version v1, the files contain the improved version v2. The v2 version has the changed hinges and latch seen…
Print it out of PETG, ABS/ASA or similar temp resistant filament. Flashlight could melt PLA in higher modes.
Custom back panel designed by me, Use textured PEI Plate for the gradient look
Puck cutout is 90mm x 10mm for a Verizon wireless charger.
Designed to press fit the Ambrane Wireless Charger for the S21FE, while the top houses the stock Galaxy Watch 4 Charger which can be popped out using the included hole at the bottom. Printed using a BambuLab A1. Charger Puck Dimensions:…
Magnetic mount for the Sofirn HS21. Pause the print at the top of the pockets and insert up to 5 8mmx3mm circular magnets. Printed in PETG-CF at 0.2mm layer, seems plenty strong enough. Magnets will hold torch upside down, and print seems…
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
The original cap was for a Convoy S2+ with a 24mm outer diameter, I have scaled it for a Convoy S21A with a 26,5mm outer diameter. I love this cap, I not only use it nearly every day on my Road and MTB rides, but it is also the best from…
Stand for Samsung S21 Fe mobile phone designed for contactless EONO charger.
Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3. With this flange you can easily hang it on the wall or anywhere else.…
This is a holder for a Note20 S Pen on a Otterbox defender for a Galaxy S21 Ultra. Uses a 1/4" x 1/16" magnet inserted when it reaches 14.2mm to help keep the pen secured. Maybe add a tiny dot of glue to help keep it in place. Print…
It can be printed without supports.
Case to hold DSLogic Pro and DS212 space for accessories in the bottom. Hardware needed - 2 off 6mm x 3mm round magnets, 2 off M3 x 6mm POSI pan head screws, 2 off M4 x 30mm POSI pan head screws Print instructions Category: Tool Holders &…
I wanted to protect my equipment from bumps in transit, or dust while not in use. I designed this to print in one pass on the bed of a Bambu Labs X1/P1, and that mean many others as well. Choose which side the device model labeling is on:…
A samsung s21 case with a finger ring holder for safety and fun. Added thicker lip for holding the phone in the case and high corner protection.
Diffuser that also enables flashlight to stand on its head.
Very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope around. Although You may use single stand it is more…
Model made from measurements of the Miniware TS21. Intended for making your own case, retainer, etc.
This is a phone holder for a Kia Optima 2014. It's Designed for a Samsun S21 Ultra using an OtterBox phone case. It is meant to slot into the Kia center console (empty space) Note that if you print this with a .4 mm nozzle, the thin wall…
I modified this design to create a cut-out to use a magnetic wireless charger. I had added a magnet to my phone with this product: https://www.amazon.com/gp/product/B09BZ17JM7/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&th=1
First, unscrew the extraction nozzle from the hose. Then, screw the 3D-printed adapter onto the hose. Remove the counterpart from the machine (by loosening the screw). Finally, insert the printed adapter together with the suction hose…
