Counting matching models…
This is a wallmount to put your E-bike's Bosch charger 36-4-230 BCS220 in. My model was based on @JOGIAREA design but it seems the 2 and 4 amp versions differ a lot. I practicly had to rebuild the whole thing keeping a few visual…
mount for most typical engines like A2212 https://s.click.aliexpress.com/e/_Eu7fG6f or RS2205 https://s.click.aliexpress.com/e/_EvxsxhZ I‘ve made this because RS2205 is sold without mount, screws only PETG 100% infill weight is ~2-3g
This is a Synology DS218/DS220/DS224+ Stand to reduce noise and vibration. It also helps with better ventilation. You need door seal stripes at the bottom of the stand with a 9mm width. I used these:…
Keep your NAS power plug secure by using the Kensington Security Slot! Specs ✅ Synology DS220j compatible Print tips 🧩 1 part ⮑ Print original orientation from the STL ✨ Support free! 🏋️ 15% infill 3 perimeters can help with strength PETG…
Klammer für 40mm Rohre um die Original-Halterung der Eufycam (in meinem Falle SoloCam s220) zu montieren. Lochabstand zum montieren der Kamera-Halterung: 19,45mm benötigt: 6x M3x8mm Linsenkopf-Schraube 6x M3 Sechskantmutter Aufgrund der…
Synology DS220 NAS mount Hanger
This is a stand for Eufy Security Solo IndoorCam P24 and S220. It will raise your camera 200mm (8"). It is design to be printed without supports. You can make it any height less than 200mm by lowering the part into the build plate as…
Synology DS220J Wall Mount brackets to mount the NAS to the wall. Please be aware there is only one rotation for mounting as it has one filleted side and one chamfered side.
A friend has several e-bikes. The Charger is the same on alle of them. So I made this wall mount for the power supply. It works great and the bikes now have their own “Wallbox” I printed with supports, but if you have good bridging…
Turbine for simple BLDC RS2205 motor. Sells on Ali for 5-6 eur Need controller for 200-300W to operate
A bracket for the NPN/PNP sensor to measure your water usage.
If you break yours (which is pretty easy), or you want to customize it you can replace it with this easy and quick print. It's designed to be printed with a 0.3 mm nozzle.
Bosch BCS220 Charger Wall Mount Bracket Keep your workspace clean and organized with this custom wall mount bracket designed specifically for the Bosch BCS220 Standard Charger . This 3D printed bracket securely holds the charger in place,…
Some Sliding feet for the EMAX RS2205 2300KV motors. In the F3D file, you will find 3 parameters. Parameters rib_size This defines the size of each of the 4 ribs (as rib_size * 2 ) foot_diameter This defines the total diameter of the…
They say necessity is the mother of all inventions. I needed a pivoting mount for a monitor on my reloading bench. I came up with this design to fit my needs. It has two different monitor mounts. The file labeled monitor_mount_HR.stl…
Models: emax_motor_wrench_v1.0r.stl -----> standard wrench for rs2205/rs2306 emax_motor_wrench_motor_guard_v1.0r.stl ----> same as #1 but for people who have motor guards and cannot fit the standard wrench…
Introduction This is a holder / bracket for the Bosch E-Bike standard charger BCS220 (4A). To be used with "Yet Another Shelf" (YAS) . What you need Time: Printing time is > 7h 4x socket head screws 3x12 mm 4 washer M3 (outer diameter…
My father's Brady TLS2200 is the label maker he has used for 20+ years. He has built up a good collection of labels and ribbons for it. They no longer make the labels for it and haven't for years, but even if you have the labels for it,…
Proima3d Filament Brown PLA
Realacc XS220E top plate with VTX, Runcam Micro Camera Mounts, 45 degree antenna tube holes and separate FrSky FrSky X4RSB receiver mount, utilizing standoffs. This makes the race quad very organized with all components in their…
Pole mount for Eufy S220 as pictured, designed for a pole 44mm but given the clamp design it should fit other poles around that size. 2 x M6 bolts and nuts for the pole clamp. 2 x M4 bolts and nuts for the actual camera mount portion. PLA…
Preferably printed with PETG, ASA, or other high-temperature filaments to avoid melting due to being close to soldering iron.
Realacc XS220E Rear Mount for LanTian 2 in 1 WS2812B LED And 5V Active Buzzer Buzzer + LED board Amazon link: https://www.amazon.com/gp/product/B019UVHWMS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 Category: R/C Vehicles
Top plate for Realacc XS220E FPV Race Frame with 600mw VTX mount and mount for RunCam Micro Swift 2 600TVL 2.1mm/2.3mm FOV 160/145 Degree Top plate includes window for channel display on VTX and pinhole for channel selection button. Did…
Redesigned Realacc XS220E frame with custom top plate to house VTX, RC antenna and FPV Camera. Frame comes with low profile canopy which makes props visible in the frame. and makes the build very cramped and hard to fit components in.…
Wall holder specifically for a bosch battery charger 36-4 BCS220. Can be easily slid in and out. Equipped with holders for the plugs. Mounting by means of 3 screws. I printed my model with 100% fill, mainly for firmness. This took about…
Wrench to hold the motors while removing or installing props. Provides plenty of clearance from the props with the long handle and it has a good grip on the motor. 100% infill recommended for extra strength. The difference between v2 and…
